Spikes Tactical Chrome Bolt??

ArmedCorgi

ArmedCorgi

.475 A&M Magnum
Messages
14,425
Reaction score
22,648
Location
Utahardia
Am I losing my mind here? Back in 2011 I ordered a Spikes Tactical chrome bolt from Valhalla Tactical Supply. This was before the whole Nickle Boron craze. Spikes Tactical offered a complete BCG in Chrome as well as the carrier or bolt separately. Why is it that I can now hardly find any reference to this? It's almost as if this product never existed. WTF? I can give you an invoice and take pictures of my Spikes Tactical Chrome bolt, but search the internet for it and not much, if anything comes up. In fact there are more hits for their NiB BCG's when searching for chrome. This isn't meant to be a thread comparing the two. I just find it weird that the internet is almost scrubbed of any reference to the product. A product I know to have existed.
 
Podmonkey

Podmonkey

.577 Tyrannosaur.
U.S. Military
Messages
20,815
Reaction score
28,726
Location
Cambria co. PA
After 15 minutes of my own browsing I would theorize that Spikes discontinued the Chromed BCG in favor of the nickel boron one.
In fact I haven't been able to find the PSA chrome BCG either which likewise seems to have been replaced by nickel boron.
If you don't like nickel boron chromed BCGs are available from Daniel Defense but at a premium and with intermittent availability. I found one on Brownells for a bit less and Scionics offers an NP3 coated BCG also. NP3 is just a nickle plating with teflon mixed in.

Complete Bolt Carrier Group, Chrome Plated(5.56mm)

https://www.brownells.com/rifle-par...-bolt-carrier-group-chrome-mp-prod109980.aspx

Bolt Carrier Group- NP3 Coated Carrier, Bolt and Cam Pin - SIONICS Weapon Systems

As you can see they are all rather expensive. But you can spend more than that yet.
 
ArmedCorgi

ArmedCorgi

.475 A&M Magnum
Messages
14,425
Reaction score
22,648
Location
Utahardia
Podmonkey said:
After 15 minutes of my own browsing I would theorize that Spikes discontinued the Chromed BCG in favor of the nickel boron one.
In fact I haven't been able to find the PSA chrome BCG either which likewise seems to have been replaced by nickel boron.
If you don't like nickel boron chromed BCGs are available from Daniel Defense but at a premium and with intermittent availability. I found one on Brownells for a bit less and Scionics offers an NP3 coated BCG also. NP3 is just a nickle plating with teflon mixed in.

Complete Bolt Carrier Group, Chrome Plated(5.56mm)

https://www.brownells.com/rifle-par...-bolt-carrier-group-chrome-mp-prod109980.aspx

Bolt Carrier Group- NP3 Coated Carrier, Bolt and Cam Pin - SIONICS Weapon Systems

As you can see they are all rather expensive. But you can spend more than that yet.
Click to expand...
I had gathered that Spikes discontinued the chrome BCG in favor of the NiB. I don't understand why though. I have the Spikes NiB BCG and I find that it sticks after a range session (yes it's lubed). I also just find it weird that there is little reference to the Spikes chrome BCG. Maybe I'm just not doing a good job of searching.
 
Marine Cpl

Marine Cpl

.577 Tyrannosaur.
Messages
22,054
Reaction score
20,648
Location
Orange County
Just out of curiosity or perhaps ignorance, but what do these fancy bolt carrier groups have over standard ones that have proven themselves in combat?
 
Podmonkey

Podmonkey

.577 Tyrannosaur.
U.S. Military
Messages
20,815
Reaction score
28,726
Location
Cambria co. PA
Calculon said:
What’s the advantage of chrome over NiB?
Click to expand...
Supposedly over time the nickel boron finish becomes increasingly fouled with carbon, cannot be fully cleaned and eventually loses it lubricity.
Willjr75 said:
Just out of curiosity or perhaps ignorance, but what do these fancy bolt carrier groups have over standard ones that have proven themselves in combat?
Click to expand...
Easier cleanup, bling. That's about it.
I have the Scionics NP3 one. Cleans up shiny with an oil rag, no scraping necessary, just a quick wipe down.
 
ArmedCorgi

ArmedCorgi

.475 A&M Magnum
Messages
14,425
Reaction score
22,648
Location
Utahardia
Podmonkey said:
After 15 minutes of my own browsing I would theorize that Spikes discontinued the Chromed BCG in favor of the nickel boron one.
In fact I haven't been able to find the PSA chrome BCG either which likewise seems to have been replaced by nickel boron.
If you don't like nickel boron chromed BCGs are available from Daniel Defense but at a premium and with intermittent availability. I found one on Brownells for a bit less and Scionics offers an NP3 coated BCG also. NP3 is just a nickle plating with teflon mixed in.

Complete Bolt Carrier Group, Chrome Plated(5.56mm)

https://www.brownells.com/rifle-par...-bolt-carrier-group-chrome-mp-prod109980.aspx

Bolt Carrier Group- NP3 Coated Carrier, Bolt and Cam Pin - SIONICS Weapon Systems

As you can see they are all rather expensive. But you can spend more than that yet.
Click to expand...
I bought the Brownells BCG you listed and the first one that arrived had to have been a return because not only was the chrome not in places it should have been but there was sand all inside the bolt. I sent it back for another and the one they sent back to me was much better. All the surfaces that weren't chromed on the first one, were covered on this one and there was no sand. I ended up putting that BCG in an upper I put on the AR I traded for my PCC.
 
GOYABEAN

GOYABEAN

.950 JDJ
Messages
32,287
Reaction score
66,976
Location
Land of Freedom PA
ArmedCorgi said:
Am I losing my mind here? Back in 2011 I ordered a Spikes Tactical chrome bolt from Valhalla Tactical Supply. This was before the whole Nickle Boron craze. Spikes Tactical offered a complete BCG in Chrome as well as the carrier or bolt separately. Why is it that I can now hardly find any reference to this? It's almost as if this product never existed. WTF? I can give you an invoice and take pictures of my Spikes Tactical Chrome bolt, but search the internet for it and not much, if anything comes up. In fact there are more hits for their NiB BCG's when searching for chrome. This isn't meant to be a thread comparing the two. I just find it weird that the internet is almost scrubbed of any reference to the product. A product I know to have existed.
Click to expand...
The internet controls the narrative and content it's the new all mighty :violin:
 
Podmonkey

Podmonkey

.577 Tyrannosaur.
U.S. Military
Messages
20,815
Reaction score
28,726
Location
Cambria co. PA
ArmedCorgi said:
I bought the Brownells BCG you listed and the first one that arrived had to have been a return because not only was the chrome not in places it should have been but there was sand all inside the bolt. I sent it back for another and the one they sent back to me was much better. All the surfaces that weren't chromed on the first one, were covered on this one and there was no sand. I ended up putting that BCG in an upper I put on the AR I traded for my PCC.
Click to expand...


ArmedCorgi said:
How do you like that one?
Click to expand...
It's fine. Easy to clean. Shiny. Other than the finish its strictly milspec.
 
Acer-m14

Acer-m14

.950 JDJ
Messages
34,602
Reaction score
36,426
Location
Livingston
just get a bolt and a bottle of this ;) i used to have a can of powder moly .. mixed it with a light oil

Dow Corning's Molykote Z Powder from SkyGeek is a solid lubricant that can be used throughout your aircraft. The lubricant is composed of molybdenum disulphide (MoS2), which is a powder at room temperature. It has a variety of applications including acting as a dry burnished (rubbed-on) lubricating film for metallic contacts or it can be used as a run-in aid. It can even be used in press-fittings, in heavy loads and slow speeds applications and also in extreme environments (e.g. dusty atmospheres and temperature extremes). Moreover, Z Powder can act as a solid lubricant additive for self-lubricating plastics and sinter metal parts, in metalworking compounds and in brake lining applications.

Dow Corning Molykote® Z Powder Gray Solid Lubricant - 283 Gram Bottle
 
ArmedCorgi

ArmedCorgi

.475 A&M Magnum
Messages
14,425
Reaction score
22,648
Location
Utahardia
So, what the heck. I bought the POF chrome bolt (just the bolt, not the full BCG) BOLT ASSEMBLY – Patriot Ordnance Factory. I figure I'll mate it up with my Spikes NiB carrier. I just finished free floating my S&W M&P15 upper, which was a bear with it's GI front sight post. It was obvious which way the pins needed to be driven out, but man they were in there.
 
togmaster

togmaster

.450/400 Nitro Ex
Messages
12,878
Reaction score
19,019
Location
Buoy 42
ArmedCorgi said:
AAAANND I just now realized that bolt is for piston rifles! WTF! Fucking A that is disappointing. Hope they do returns.
Click to expand...

The one linked in my post above is DI. I'm sure they will accept a return but if they don't I'll give you half of what you paid. :evil:
 
ArmedCorgi

ArmedCorgi

.475 A&M Magnum
Messages
14,425
Reaction score
22,648
Location
Utahardia
togmaster said:
The one linked in my post above is DI. I'm sure they will accept a return but if they don't I'll give you half of what you paid. :evil:
Click to expand...
Ha! It's odd that they have a DI BCG with a NiB carrier and a Chrome bolt, but they don't sell the parts separately. Or that they have piston rifle BCGs and they sell this piston rifle bolt, but not DI bolts.
Idk, I'm kicking myself for just assuming and not scrolling down the page further and reading the actual discription. Looking at the photo initially with the angle the photo is taken at, it looks like a DI bolt, but when you compare it to a picture of an actual DI bolt you can see the difference.
 
ArmedCorgi

ArmedCorgi

.475 A&M Magnum
Messages
14,425
Reaction score
22,648
Location
Utahardia
So the bolt arrived yesterday but I didn't get a chance to open the mailer till just now. I don't know what happened (I feel like it was a clitch in the matrix) but the item I bought from POF was the same sku number as the one I linked to that says further down in it's description that it is for piston rifles. However, I open the package and wouldn't you know it....it's a bolt for DI guns!! Hot damn! Just what I wanted and thought I ordered in the first place! Made my day. It's so weird though, lol.
20190825_184256.jpg
 
ArmedCorgi

ArmedCorgi

.475 A&M Magnum
Messages
14,425
Reaction score
22,648
Location
Utahardia
Podmonkey said:
Can't you take a hint and give me the gun porn I am after?
Click to expand...
It's nothing you haven't seen before. I have just free floated the upper from my S&W M&P15. That upper has the Spikes NiB BCG and I jave had issues with the bolt sticking after use. So I want to use a chrome bolt with that NiB carrier.
The picture below isn't the upper but it looks exactly like it. I used the same handguard, that is the optic I have on it now (Vortex Strikefire II),
The barrel is the early Sport barrel with the 1/8 5R rifling Melonited. The upper(not pictured) also has a MI rear BUS with Tritium dots on either sid of the ghost ring. I have a tritium front site post I have to remove from the oem site base.
20190418_211102.jpg

This past Saturday I took the upper to the range for testing and had what started out like magazine issues that turned out to really be gas block issues. It started to not strip a new round which I though had to do with my mag, but it started doing it with all of my mags. Turns out my gas block was walking towards the muzzle and as it did so, the gun began to short stroke until it became a bolt action and had to be manually cycled, lol.
 
Podmonkey

Podmonkey

.577 Tyrannosaur.
U.S. Military
Messages
20,815
Reaction score
28,726
Location
Cambria co. PA
ArmedCorgi said:
This past Saturday I took the upper to the range for testing and had what started out like magazine issues that turned out to really be gas block issues. It started to not strip a new round which I though had to do with my mag, but it started doing it with all of my mags. Turns out my gas block was walking towards the muzzle and as it did so, the gun began to short stroke until it became a bolt action and had to be manually cycled, lol.
Click to expand...
That is exactly why I require a pinned gas block. A set screw in a dimpled barrel is supposed to work also.
 
ArmedCorgi

ArmedCorgi

.475 A&M Magnum
Messages
14,425
Reaction score
22,648
Location
Utahardia
Podmonkey said:
That is exactly why I require a pinned gas block. A set screw in a dimpled barrel is supposed to work also.
Click to expand...
I have half a mind to saw off the sight tower of the original front sight base and put it back on. Just not sure if I could get away with using a hack saw or if I'd need a band saw or angle grinder. I thought about putting dimples into the barrel, but I don't have a drillpress and I don't think I'd feel comfortable drilling into the barrel.
 
Last edited:
Podmonkey

Podmonkey

.577 Tyrannosaur.
U.S. Military
Messages
20,815
Reaction score
28,726
Location
Cambria co. PA
ArmedCorgi said:
I have half a mind to saw off the site tower of the original front site post and put it back on. Just not sure if I could get away with using a hack saw or if I'd need a band saw or angle grinder. I thought about putting dimples into the barrel, but I don't have a drillpress and I don't think I'd feel comfortable drilling into the barrel.
Click to expand...
I am not comfortable with that procedure either.
But companies like Faxon offer a pre fit and pinned gasblock. That's the route I'm going when I get around to my lightweight build............ someday.
 
Podmonkey

Podmonkey

.577 Tyrannosaur.
U.S. Military
Messages
20,815
Reaction score
28,726
Location
Cambria co. PA
Very nice indeed. Looks clean to me and the has block is hidden besides. Also with 2 pins that block is going nowhere. Nice job!
 
Acer-m14

Acer-m14

.950 JDJ
Messages
34,602
Reaction score
36,426
Location
Livingston
20190825_184256-jpg.51591


that's a crappy chrome job .. where is the mirror shine .. WTH ..










LOL ..
 
ArmedCorgi

ArmedCorgi

.475 A&M Magnum
Messages
14,425
Reaction score
22,648
Location
Utahardia
So, forgive the thread revival, but there is something that bothers me a little regarding the POF chrome bolt I purchased. Granted, I haven't used it yet and looking at the bolt you can tell it is quality. The finish and machining are top notch. I'm in no way dissapointed with the bolt. What bothers me, is that there is virtually no specs on this bolt. The bolt isn't marked. Their website doesn't even list the DI bolt, they only have the piston version listed and there are no specs listed for that one either...

So I decided (a year later I know) to reach out to POF and ask them if the bolt is MPI and HPT along with other specs. I did the online chat and have the transcript of the discussion. Long story but the short is that I didn't get a direct answer to a very simple and direct question. What I mostly got seemed defensive in its tone and content. The rep simply bombarded me with how there bolts have withstood many a torture test and have better than milspec specs(only wouldn't say what those are) and better materials, the proof is in the pudding and yes they are batch tested we can't test each one individually, yada yada yada.... In a way it reminds me of my experience with Foxtrot Mike. Lots of talk about nothing that would help me.

I don't have any experience with this company other than buying the bolt, but I know they have a good rep. Just don't really understand why the talk around to a simple question. I don't know. Anyone else have experience with them or have an opinion to what I described?
 
You must log in or register to reply here.
Top