Search results

I have a binder with sheet protectors where all my purchase authorizations, FFL transfers and receipts go after I scan them. Everything is logged by pistol, long gun and others, then by date. In my excel spreadsheet is is done by date, caliber, type (i.e. pistol, long gun, etc) where I...

The Amend2 S300 doesn't support a weight kit and it doesn't even have a spot to rig it in it. It's definitely front heavy but not as bad as you'd imagine. If anything it helps combat the muzzle flip. I'm gonna get a Wilson Combat grip module and tungsten weight kit for that to have to swap...

Took it to my place in PA today, popped in a 15 round P365 mag. It feels much better, especially when firing, the extended grip provides better control. My biggest grip was paying $47 for a Sig mag. To add insult to injury, the bastards can't even make a back strap for the extension cover. It...

Here is my M18 slide on the Amend2 S300 grip module. It is top heavy since the P320 slides are on the larger side. It definitely needs an undercut. It would probably feel better with an extended mag and not just the pinky grip. I can confirm that it works with P320 holsters.

Taiwan owns Taiwan, fuck China. We need to put a stop to them sooner than later.

Because that's really gonna stop crime in the Rotten Apple. He does jack shit and is a piss poor embarrassment of a Mayor. But hey, let's continue to virtue signal and not enact any meaningful anti-crime elements to truly protect the denizens of the city. With all the subway pushings or EDPs...

They were from Queens not Brooklyn.

Anyone use one of these yet? I ordered one, some P365 mags and an M18 slide. I'm gonna give it a go and see how it is. Worst case I can use it for my compact frame.

I wouldn't mind but he is far more effective as the model conservative Governor.

What Tulsi did is admirable but I think it's a dog and pony show. She is a WEF supporter. Hard pass on VP.

Keep the body count coming. Nothing is gonna change with Whorechul and Adams in charge.

Well again, having anything removed from city permits is a huge hassle and having done some upgrades to my American so it was the logical route for me. The only thing remaining from stock will be the receiver and the main bolt body.

Still waiting on my barreled receiver to come back from Mark and he said it wouldn't be ready by the Oaks fall show. In the meanwhile I purchased this M-Lok quiver. I'm not sure if I like it or maybe it just looks odd because the barrel isn't there. I was thinking about going with a Hoptic...

Any AR15 upper... so.. 5.56/.223 Wylde 224 Valkyrie 300 AAC Blackout 350 Legend 338 Spectre 7.62x39 6.5 Grendel 6.8 SPC 450 Bushmaster 458 Socom 50 Beowulf Did I miss anything?

I like it just for the fact you can use any AR15 upper with it. But I do agree with Dsdmmat that an SCR AR10 platform would have been better.

Let's not help thousands of Americans who were hard hit by Covid-19 and government lock downs setup to destroy the economy... but hey, let's send millions of dollars to Ukraine... FJB. Edit: fixed my thought and never reply to threads when half awake

I wonder if it can handle steel cased ammo.

I believe they have a pattern very similar to that; forest camo.

Boyds Gun Stocks has them.

@1075tech I really hope it doesn't take over a year like the custom barrel for my .458 socom and Alexander Arms tank brake took.

Newburgh seems more of a shit hole than East New York in Brooklyn, and that's not saying much.

Where is your supporting evidence to make some kind of statement like that? Are you taking a play from Whorechul's play book and making wild accusations without evidence? What if he's just a hobbyist like the rest if us but decided to be stupid by making P80s. Like Frankencub said, does this...

So why is the PA AGs office involved in this? Was this someone their joint task force was following around to the shows in PA? There was no context as to why they were involved, can only assume the above. If he was purchasing them in PA it is not illegal to do so, neither is constructing them...

Cabela's should be boycotted, talk about bending over for Whorechul.

Queue in Mandalorian theme.... This is the way.

There isn't a more accurate statement in the world

This is my current EDC. Smith & Wesson Tanto neck knife with survival whistle (not that I'd ever use the whistle in an urban scenario). I carry this and brass knuckles in the rotten apple since I can't CCW. Was a nice cheapie pickup for $35. I have more expensive blades but rather not dirty...

Here is the chassis ready to go with the Atlas BT10, my extra Arken EP5 and SendiT electronic level. Eventually i'll get an MDT skeleton buttstock. Nowwww, if my newly barreled receiver would get finished it would be fantastic!

Also ordered: Anarchy Outdoors Carparison cheek pad Anarchy Outdoors Polished titanium bolt shroud AD Arms Billet rifle cocking piece Anarchy Outdoors Firing pin

He is 100% correct. If the receiving FFL took possession and modified it afterwards and he did not have a manufacturing license, he'd get jammed up as well This is what I was told when I wanted to transfer a non compliant carbine and wanted them to do it for me.

What if you have migranes and take prescription meds? Things like Fioricet are a barbituate based medication which shows up on tox-screens.

We will always be villafied by the left. Hell, just being a conservative or a moderate democrat (i.e. Tulsi) will get you labeled almost the same. The real sad part is, kids are so brain washed and coupled with the lack of critical thinking these days, they see nothing wrong. They don't...

I'm assuming if I didn't catch this, it would have resulted in a catastrophic failure?

I was reloading some .223 rem today and decided to use the MidwayUSA factory seconds I purchased; 69gr HPBT. After pressing a few round I noticed that some of the projectiles were different. The one on the left is .224 and the one on the right is .242 I am assuming correctly that this is a...

I refuse to buy from them. They bitched out like a bunch of cunts and bent over when that animal AG James was threatening companies. Instead of telling her to fuck off, they bent over and asked for lube. I love these companies that tout how they are pro 2A and huge supporters but will bend over...

I like it, it looks very well thought out.

Yes I do.

I don't have pictures but before I sent it out, I was shooting 4" groups at 500 yds on a man-sized steel target; it was quite bad for LRP shooting. I'll definitely report back after it's completed, and I get some rounds through it.

Since my recent venture into LRP shooting I quickly realized that I need something more cost effective to shoot frequently. I was thinking about buying another RPR in a smaller caliber but it didn't make much sense to me since I already have a Ruger American that I did some upgrades to; Timney...

I wonder if the Supreme Court will intercede on this. It is a clear violation of 4th amendment which justifies protection of privacy. The super leftist liberals and progressives are using Orwell's 1984 as a fucking how-to manual.

This may be the perfect time for another company to start up who will not bend to the left.

As stated, I'm looking for some decently priced once used 458 Socom brass.

Escaped to my other home in PA for the long weekend. My rifles were all happy to see me. Here is my AK and SKS hanging out. Tomorrow I'm off to the game lands range by Lake Wallenpaupak to have me some fun!

So then yes, porting would be favorable.

I'm not sure if it falls in the line of recoil, but less muzzle flip. I know that it all depends on the caliber size/pressure to maximize the porting.

Is it not a good idea?? I just figured since we cannot have threaded barrels for compensators.

He did no such thing... it was his babysitters with access to the POTUS account. When the house of cards falls, he will blame them, the teleprompter, conservatives, and Trump.

If it wasn't a FBI agent who did it to gas light the retarded masses.

Used some tap oil and sandpaper and got it done. Barrel fit nicely in the slide. I'm thinking about sending the complete slide out to Mag-na Port to put ports in the top of the barrel.

Well, I guess I won't be needing the slide plates any longer. I picked up a Legion Precision slide. They are one of the few companies who make slides for the 34 Gen 5. I got it cut with a Trijicon foot print. Unfortunately the tolerances on the slide are slightly tighter so I will have to sand...