Search results

  1. Tinman

    DONE Free Brass

    I have 179 pieces of once fired brass in .45 acp. It is all a mix of Blazer and Federal. It is all SMALL primer. Free to a good home.
  2. Tinman

    F/S Lee Loadmaster Shell Plates

    I have 2 Lee Loadmaster Shell plates for sale. Lee # 6S ————— 32-20 / 25-20 and similar casses Lee # 7 AS ———— 32 acp / 30 cal. Carbine and .22 hornet $35.00 for both shipped.
  3. Tinman

    Storage for the 5 hole loadmaster turret

    I have the Lee Loadmaster with the 5 hole quick change turrets. This is how I store them. I use a 3” PVC coupling. The turrets fit perfect inside of it and the lip of the coupling works as a step to hold the turret. You can have all of your dies preset in the turret and store them in the...
  4. Tinman

    Reloading room air compressor

    Does anyone keep a small air compressor in their reloading room? If so what kind and size. I am thinking about adding one and looking for suggestions. I have been looking at the Fortress 1 gal. at Harbor Freight.
  5. Tinman

    Light for your reloading press

    I just purchased a light made just for my loader. It is from a company called KMS Squared. They have lights available for most loaders. Cost was about $30.00 shipped. Comes with the light, a switch and a 12 volt adapter. Here are a couple of pictures.
  6. Tinman

    DONE Treadmill

    This is a Fitness Gear Mdl. 830T. Excellent condition. Works perfect. Has hardly been used. Has programs for workouts with multi speed and inclines. Also includes original owner’s manual and a mat. Paid over $800 new. Asking $400 obo. Must be picked up.
  7. Tinman

    Wood furniture for Mossberg Shockwave

    What do you guys think of adding this wood furniture to my Shockwave?
  8. Tinman

    Vortex Rings

    I just purchased a set of precision scope rings for my Vortex Viper scope. Should be in next week. My question is what info should I post to sell my other rings? They are 30mm and I also have a riser that I will sell. Just asking so I get all of the info that someone would need. Thanks.
  9. Tinman

    Ultrasonic Cleaner

    I bought a Hornady Lock and Load 2 liter ultrasonic cleaner today. Looks pretty nice. Have not used it yet. Anyone have any experience with this cleaner?
  10. Tinman

    Gun Show at Hamburg Fairgrounds

    Anyone going to the gun show at the Hamburg Fairgrounds this weekend?
  11. Tinman

    DONE Maxpedition Thermite Versipack

    This a mint condition never used Maxpedition Thermite Vetsipack. Has waist and leg strap. Zippered pockets and Velcro straps.the first two pictures are stock pictures from Maxpedition. The second two pictures are actual pictures of the item. $50.00 shipped
  12. Tinman

    WTB 105 mm artillery shell

    Looking for a 105mm brass artillery shell for my gun room. Looking for one in very good condition.
  13. Tinman

    DONE Combination tool cabinet and work bench

    This is a Craftsman tool cabinet / work bench. Has 4 drawers and a cabinet with adjustable shelf. It is 21”d x 55”h x 48”w. It is very good condition Asking $100 Must be picked up.
  14. Tinman

    DONE Stihl Backpack Leaf Blower

    This is a Stihl BR420 Magnum backpack leaf blower. It is in excellent condition. Runs perfect. Has a 3.3 hp 2 cycle engine , 172 mph @ 724 cft/min. Weighs 20.3 lbs. Comes with original owners manual and a 16 oz. bottle of 2 cycle oil. This is a commercial grade blower but has only been used at...
  15. Tinman

    DONE Stihl String Trimmer

    This is a Stihl FS 55RC straight shaft string trimmer. Excellent condition. Starts easy with Stihl easy pull start system. Comes with .095 string and original owners manual. Asking $150 obo
  16. Tinman

    DONE Troy-Bilt Lawn Edger

    I have a Troy - Bilt model 554 lawn edger for sale. Excellent condition. 9” tri-blade. 158cc. 3060 rpm. Runs perfect. Comes with original owners manual. Asking $125 obo. SOLD
  17. Tinman

    DONE Craftsman 2 Drawer Middle Tool Chest

    I have two Craftsman 2 drawer middle tool chests for sale. They are in perfect condition. 26”w x 11 1/2” h x 12” d. Both cabinets have 2 keys. Local pickup only. Too difficult to ship. One of the pictures shows them stacked on top of each other. $75 each or both for $125
  18. Tinman

    Found a new holster manufacturer

    The name is Winthrop Holsters in Lakewood, Ohio. Ordered one for my Kimber Micro Nine. It came today and looks real nice and seems very well made. Cost $38.95 with free shipping. Made in the USA. Beats paying $110 for a Ritchie Holster. Here are a couple of pictures. Www.winthropholsters.com
  19. Tinman

    My new Kimber Micro Nine

    I picked this up Tuesday. It shoots real nice with a very acceptable recoil.
  20. Tinman

    DONE Sambar Stag Grips

    These are Sambar Stag Grips by Exotic Pistol Grips for a Kimber Super Carry Pro. They should also fit any standard 1911 with a round butt, like the Sig and S&W. They are in mint condition. ( A Sambar Stag is a large deer native to India, South China and Southeast Asia.) $ 200 shipped. Would...
  21. Tinman

    DONE Napoleon Professional Charcoal Grill

    this is a Napoleon Professional Charcoal Grill Model PRO605CSS. It is in excellent condition. 4 years old. Comes with owners manual, starter chimney, smoking box and a new bag of charcoal. Cooking surface is 17 1/2” d x 33 1/2” w. Has 3 reversible grates. Has 6 levels for the Charcoal. Cost new...
  22. Tinman

    DONE 2010 Cub Cadet Yanmar sub compact tractor

    2010 Cub Cadet Yanmar SC 2400 24 hp diesel sub compact tractor. Has a 60” mower deck, mid PTO , rear PTO and live 3 point hitch. Has 502 hours and all 500 hour service done. 2 and 4 wheel drive with high and low range. Comes with extra set of blades, 2 5 gal fuel cans, 2 extra oil filters and 6...
  23. Tinman

    DONE Oriental Rug

    8’x10’ oriental Rug. Actual measurement is 7’10” x 10’10”. Very good condition. Cost $1500 new. Smoke free home. Asking $250 obo.
  24. Tinman

    How do I travel through NYC with my firearm?

    I will be traveling to Long Island soon and I want to keep my carry gun with me. I know I can’t carry in NYC, but what is the best way to get it through the city and onto the island?
  25. Tinman

    DONE Rolling File cabinets

    I have 2 wooden rolling file cabinets for sale. They have one drawer on top and a file drawer on the bottom. Also they have locks. Both are in very good condition. $ 50 for the pair
  26. Tinman

    Polished my S&W Mdl. 64

    Here are the pictures. I think it turned out well.
  27. Tinman

    F/S Car Wall Art

    These are made of plastic and measure 16"w x 11"h x 2"d. Look very nice on a wall. Not sure how old they are. I bought them about 20 years ago at an antique shop. The blue one was made in 1978 and the red one in 1977. Date on the back. Asking $35.00 shipped
  28. Tinman

    DONE Craftsman wrenches

    I have a set of craftsman open end / box end wrenches for sale (mint) 3/8" - 3/4" A set of Gearwrench openend/box ractchet end (never used) 3/8"-3/4" A set of Craftsman boxend ratchets (Excellent) All seen in the picture $80
  29. Tinman

    F/S Round table and chairs

    This is a round office type table with 2 chairs. Table is 41 1/2"d x 28"h. Great condition. $50 obo for all.
  30. Tinman

    DONE Office Furniture

    We are closing our office and retiring. I have 2 L-shaped desks, 6 office chairs, a storage cabinet, a large printer stand and another desk, all for sale. If you would like pictures let me know. All items are " Make Offer"
  31. Tinman

    DONE Wood book shelves

    I have 2 wood book shelves for sale. 36"w x 71" h. Both have adjustable shelves. Great condition Would look good in a gun room. Great for storing supplies. $40 ea or $60 for the pair. or make me a good offer
  32. Tinman

    DONE 2 drawer file cabinets

    I have 5 - 2 drawer file cabinets for sale. Very good condition $20 each or all 5 for $75
  33. Tinman

    F/S Duncan Phyfe Drop leaf Table

    This is an antique Duncan Phyfe drop leaf table. It measures 43"l x 36"w X29"h. with the leafs up. it has 2 12" drop leafs. Very good condition with a few very small scratches. Asking $175 obo.
  34. Tinman

    DONE Brass Tiffany Lamp

    This is a brass tiffany table lamp. Stands about 20" tall. In perfect condition. Asking $75 obo prefer local pickup
  35. Tinman

    DONE Antique Bakers Rack

    I have an antique bakers rack for sale . Excellent condition. 47 1/2"W x 80 1/2"H x 15"D Is made of wood with iron & brass trim and glass shelves. The measurements are taken at the widest part of the base. This is very heavy, local pickup. Asking $200 obo
  36. Tinman

    To polish a SS revolver or not

    I have a couple of stainless steel revolvers that I am considering polishing. Nothing too aggressive, just some Mothers applied to bring out a nice shine. Any opinions?
  37. Tinman

    DONE Leather Ammo wallet

    This is a leather ammo wallet that attaches to your belt. Will hold 6 rounds of .45 acp, .45 LC or .410 shot shells. $10.00 shipped
  38. Tinman

    DONE Ammo carrier for belt

    I have a Don Hume ammo carrier for a belt. Holds 12 - .38 spl or .357 mag. $20.00 shipped
  39. Tinman

    So, how many knives do you have in your collection?

    I currently have 19 folders and 19 straight blades. Always looking to add more.
  40. Tinman

    Spyderco Para 2 or Para 3?

    I am looking at the Para series in Spyderco. Which would you buy? The Spyderco 2 or the Spyderco 3. I have a Spyderco Efficient.
  41. Tinman

    Well I bought another Benchmade

    I just bought another benchmade. It is a 133BK Infidel. 4.52" D-2 blade with an OAL of 9.21"
  42. Tinman

    Please delete

    Duplicate please delete
  43. Tinman

    Picked up a couple of new knives today

    The top one is an Ontario SP-10 Raider Bowie The bottom one is a Benchmade 119 Arvensis
  44. Tinman

    Hamburg Gun Show 1/5/19 - 1/6/19

    The Hamburg Gun Show is this weekend. Anyone going?
  45. Tinman

    New knife

    It is made by Silver Stag in Washington. 8" blade with a stag handle.
  46. Tinman

    Randall made Knives

    Does anyone have a Randall made knife? Are they worth the money ?
  47. Tinman

    Buck 184 Buckmaster

    I am looking for a Buck Buckmaster Mdl.184. The prices are all over the place. Anyone have an idea what they are really worth? Anyone have one they are interested in selling? I am looking for the knife complete with the factory sheath and all original accessories that came with it.
  48. Tinman

    Speed Loaders for Revolvers

    What speedloader for a revolver do you think is the best?
  49. Tinman

    New Crimson Trace Saddle Laser

    This is the new laser for Mossberg 500 or 590 and the Shockwave. Red laser lists for $169.00 It is supposed to be release 11/15/18. Looks pretty cool.
  50. Tinman

    My new S&W Model 69 .44 mag 2.75" Barrel

    Well I finally made the decision and got the S&W mod. 69. Here are a couple of pictures. Just picked it up this morning.
Top