Search results

  1. ohms139

    Who Has an SCR???

    Finally got around to building a .458 SOCOM upper for my SCR. I just need to get this pepper muzzle break off, put a cap on the threads and put 4 weld beads on it to make it compliant. I have not shot it yet and yes I know I have to clean my bolt carrier. ;)
  2. ohms139

    Who Has an SCR???

    Edwardteach72 is correct. Check out Boyd's stocks. You can get one in similar finish from them. Just remember to search for Remington 1100.
  3. ohms139

    Who Has an SCR???

    I purchased a Magpul SGA to do a test fit and it's not possible without a lot of fabrication. The mounting bolt hole is not angled right in order to widen the hole in order to put the recoil tube/spring assembly through. If you planned to go through a different angle you would need to get a...
  4. ohms139

    Walmart to stop selling short-barrel rifle ammunition

    I wasn't aware that an AR-15 in standard configuration was considered an SBR and Walmart somehow had the ability to ignore federal law and ATF directives and sell them. :p:p:p:p:rolleyes: They can't even use correct terminology... It's magazines damn it.
  5. ohms139

    Odessa Shooting

    Except the young white men that are part of Antifa.
  6. ohms139

    Magpul the 870 Marine Magnum

    Hey, that's my old hardware! Nice looking 870, I've always loved the Marine.
  7. ohms139

    SOLD For Sale - Glock .22 Cal Conversion Kit For G17

    I'm assuming the kit will work on a Glock 31 since its uses the same frame as the Glock 17. If it will work I may buy it.
  8. ohms139

    First Bolt action rifle

    Yeah thats REALLY far from me; 5 hour drive. I'm in Diblowsio land.
  9. ohms139

    First Bolt action rifle

    Haven't had a chance to get out to a long range.
  10. ohms139

    Who Has an SCR???

    Thanks Will
  11. ohms139

    Who Has an SCR???

    The one NYS legality I'm actually curious about is if a Sporter or Monte Carlo style stock with a thumb hole is ok. Anyone know?
  12. ohms139

    Who Has an SCR???

    I purchased the full rifle from a shop on Long Island. If you buy a lower and build one yourself I am 99% sure you do not need to bring it in for inspection; I have never heard of this but I could be wrong. The only grey area with you buying an SCR lower and the issues you would face is: 1...
  13. ohms139

    Secret Service Dropping .357 Sig

    A few months ago I purchased a Glock 31 .357 sig which was an LEO trade in for $235. I caught a little verbal abuse at the shop (in a joking manner) for buying what they called a useless caliber. I love my Glock 31 and the caliber. While I find that there is more flip on the gun than 9mm I...
  14. ohms139

    Did NYC put a new gun law into effect today - Wed 8/7/19?

    Just some background on me. I have all my permits which allow me to have my handguns and long arms. I bring this up because this afternoon I went to Nassau County Pistol & Rifle Range with two of my friends (who are NYC residents) to shoot my long arms with me. I had a Mossberg Scorpion, .22...
  15. ohms139

    Gillibrand: People ‘Fueled’ by Trump’s Racism Are ‘Hunting’ Fellow Americans

    And those liberal savages dare call the right "deplorable". Is there no shameful boundary they will not cross in an attempt to gain the upper hand; it's fucking pathetic and disgusting.
  16. ohms139

    Shooter injures at least 18 at Walmart in El Paso - 08/03/19

    I agree with the above statement 110%. I grew up running around my local park and during Boy Scout trips in military fatigues and toy guns playing "Soldier". I don't know how old you all are, but I'm betting to say probably older than myself at 41. The big difference I believe is the following...
  17. ohms139

    Shooter injures at least 18 at Walmart in El Paso - 08/03/19

    1. FuAC is truly a moron if he thinks that the NRA is the root of the issues with mass shootings. I'm pretty confident when I say that no NRA member has been involved or the actual perpetrator of these heinous events and even the ones within the last 3-5 years. 2. The gun violence epidemic only...
  18. ohms139

    I think I ruined my PC carbine

    Glad to hear that your carbine got fixed. Ruger is a stand-up company.
  19. ohms139

    I think I ruined my PC carbine

    Talk about a thread going completely off the rails.
  20. ohms139

    First Bolt action rifle

    My Glades Armory tactical bolt handle arrived today. Have to take some black plastidip to the cross hatch knob.
  21. ohms139

    Active shooter in California

    All these active shooters today seem like well organized and calculated attacks to strike fear into the general public to cause an outrage against gun owners and politicians who support 2A in effort to galvanize the voting base against conservatives.
  22. ohms139

    Active shooter in California

    Not to trivialize the loss of life but it really seems all too convenient doesn't it?
  23. ohms139

    I think I ruined my PC carbine

    Good luck with everything Depick. It was a cheap learning lesson.
  24. ohms139

    22TCM Rifle, pistol and ammo

    I almost purchased an RIA 1911 .22 TCM but the guys at the gun shop I frequent persuaded me otherwise. They said that had too many returns on the gun because of hard lock issues which they said was from the 22 TCM ammo.
  25. ohms139

    First Bolt action rifle

    I have not made it out to a long range yet. My regular range (Nassau County Rifle & Pistol only goes to 25 yards but I did go and zero out, not that it matters at 25.) I have to find a place upstate or get out to Brookhaven range one of these days.
  26. ohms139

    Newbie from the Capital Region

    Welcome and congrats on your citizenship!
  27. ohms139

    Troy Ny. From old site.

    Welcome aboard. Why would you leave VA for NY?! VA is a gun safe haven; well unless you were in a leftist city there.
  28. ohms139

    Greetings from Schenectady county!

    Welcome aboard.
  29. ohms139

    Greetings from southern NY (Not NYC :)

    Welcome to a safe haven.
  30. ohms139

    First Bolt action rifle

    And your opinion is like an asshole, everyone has one.
  31. ohms139

    First Bolt action rifle

    And here she is pretty much completed, the only change I made was the direction of the cantilever mount. The nuts for the mount was interfering with the ejection of the spent casings. I'm still waiting for the Glades Armory tactical bolt handle and the Timney Trigger. The bolt cycling is...
  32. ohms139

    Do folks frown on buying online?

    I have no problem supporting my local gun shop. They are reasonably priced and whenever I buy a gun the owner throws in like two boxes of ammo for free. When I purchased my Marlin they didn't have the cardboard box for it so they have me a shop branded soft case ($50 value) for free. I purchase...
  33. ohms139

    First Bolt action rifle

    Here is the result after 600 cycles with the JB compound. It worked reasonably well, I'll just have to do some minor sanding/polishing using 3M P800 WETORDRY sandpaper.
  34. ohms139

    Starting a "What did you Get today" thread. Let's give it a try (dont forget pics)

    And... Magpul 10-Round PMAG 7.62 AC - AICS Short Action Magazine, 7.62X51mm NATO, Pack of 3 Lancer Viper Brake - 6.5 - Black - LVB-65-BK Magpul Industries Bipod for M-LOK, Black, MAG933-BLK Vortex Crossfire II 6-18x44 AO Rifle Scope, V-Brite Reticle CF2-31029 Vortex Viper Extended Cantilever...
  35. ohms139

    First Bolt action rifle

    Just ordered a few more items which I updated on the first post and most importantly some JB Non-embedding bore cleaning compound so I can start on the project to get rid of the corduroy pants noise.
  36. ohms139

    First Bolt action rifle

    Plinking for now, eventually hunting.
  37. ohms139

    First Bolt action rifle

    It's funny that you say that. I'm hiding mine from my fiancee :ROFL:
  38. ohms139

    First Bolt action rifle

    I shot a .308 many moons ago but I personally do not own one. Familiarity with: .223 / 5.56 .22 LR .45-70 Big Govt .303 British 12ga For the long gun cartridges.
  39. ohms139

    First Bolt action rifle

    I have zero familiarity with that cartridge. If I don't need it that's fine, less money I have to spend! Thanks for the info. :headbang:
  40. ohms139

    First Bolt action rifle

    I just purchased a Ruger American 6.5 Creedmoor w/ Magpul Hunter stock as my first bolt action. Updated: Ordered a Magpul M-Lok bipod and Leapers UTG 1-8x28mm MRC scope Vortex Crossfire II 6-18x44 AO Rifle Scope w/ Vortex Viper extended cantilever for it. Also ordered: (3) Magpul 10 round...
  41. ohms139

    Customizing my Marlin 1895G

    :ROFL::ROFL::ROFL: Thanks!
  42. ohms139

    Customizing my Marlin 1895G

    Here she is completed. I know the Loading Gate is missing, the damned screws are so soft. I over torqued the screw and broke it, a new one (bought four just in case) should arrive tomorrow. I had to file down the wood below the hammer spur extension since the Boyds stock runs a little higher...
  43. ohms139

    Customizing my Marlin 1895G

    It was actually very easy, maybe 15 minutes. The instructions were very clear.
  44. ohms139

    Customizing my Marlin 1895G

    I agree, not a fan of the wood but it looks amazing.
  45. ohms139

    Customizing my Marlin 1895G

    :smash: NO WAY... absolutely not.
  46. ohms139

    Customizing my Marlin 1895G

    :ROFL::ROFL::ROFL:
  47. ohms139

    Customizing my Marlin 1895G

    haha, that's where I draw the line my friend.
Top