Search results

https://www.infowars.com/posts/top-pentagon-insider-abolish-second-amendment-deploy-national-guard-for-mass-gun-confiscation-effort/

Several years ago I bought this Elite Energy 32 compound bow, and about two weeks later I injured my shoulder. My shoulder is never going to heal enough to allow me to use this bow again. Too bad, because the bow is absolutely spectacular to shoot and I always enjoyed archery. This bow is a...

New in factory package. This Maxpedition Gyrfalcon internal frame backpack has a removeable waiste pack and is listed as 36 liter size. Black color. $ 175 local pickup (greater Buffalo area) shipped at actual freight cost. (stock photo)...

I have an AR that has had problems with the bolt going fully into battery. At that point, the bolt gets stuck and is very hard to open. I always thought it was a very tight chamber causing the problem. I replaced the entire upper with a new one from a different manufacturer. Taking it to...

I got a head start on the season this morning. On rt 219 right at the NY / PA State line, I whacked a coyote with the big truck. As far as I'm concerned, it counts toward this year's total ! If I can get the boss to send me the dashcam footage, I'll post it. It was more of an accident that...

I have several ( 4 I think, maybe 5 ) garage door remotes for a Genie garage door opener. They all work. They use the Intellicode system and can easily be programmed to work with your Genie garage door opener. Who needs these ? Buffalo area

Ok, I think I'm pretty good at identifying prints and tracks, especially if I can study them. But, this is new to me. I found these tracks at the place I deliver to. They make manmade stone products. The tracks were in the soft sand which is dust consistancy. One picture has a dollar...

I had to go to the T-Mobile store this evening brcause my phone has been acting weird all day. So I put on a hooded sweatshirt while sitting in my truck, then grab my phone and wallet and go inside. There are two people working there, both with customers, as well as another guy that walked in...

I'm looking for some .308" 208gr Hornady AMax bullets. I have a bunch of different reloading components to trade, or I'm willing to buy them from you. I would take as many as 500 if you have that many to spare. Let me know what you have and what you want. Thanks ! Greater Buffalo area

I am looking for 1 or 2 of these type liquid totes. They need not be food grade, but must be non-hazardous. They may be lightly damaged or leak. Willing to drive a reasonable distance from Buffalo to pick them up. The less expensive, the better - "free" is best. What do you have or do you...

Mayor Byron Brown announced that the City of Buffalo has filed a lawsuit against various gun manufacturers, distributors and gun dealers. Thesuit leans on how the guns are marketed and blames the city's violent crime on the parties named in the lawsuit. Brown also says "This isn't about legal...

How does this work ? A lady that was my next door neighbor here moved to Arizona a few years ago. Once there, she got a Arizona carry permit and bought a pistol. Now she decided that she wants to move back here, and asked me what she needed to do. I told her that she could sell her gun down...

I have to show up for Grand Jury selection on Monday at 25 Delaware, Buffalo. Has anyone been there recently ? Can I still check a waepon at the entrance ?

Approximately 100 links for 50 BMG. You pay for flat rate shipping box ( should fit in medium box ) or pick up somewhere near Buffalo / WNY

I was hanging out in the garage this evening, just doing a few things to my motorcycle, and my friend stopped by to drop off a few things he wanted me to store for him while he moves. Somehow we got talking about the get-home bag I keep in my truck, and what's in that. That of course led to...

Congressman Chris Jacobs pledged he would vote to ban semiautomatic rifles if a bill came up for a vote. He stated that his views on "high capacity" magazines were that no citizen needs them. He supports raising the age to own a gun to 21...

I seem to see these two markings on various AR upper receivers and lower receivers. I understand that they identify the source of that particular receiver, meaning who actually manufactured it. I believe that there are actually just a handful of companies that manufacture the parts and then...

Does anyone here collect pocket knives ? I have a collection of knives, most being made by Ontario Knife Company in Franklinville, N.Y. I really have no use for them. In the collection are a few reasonably rare knives that I know are valuable. Anyone in the greater Buffalo area interested in...

Anyone in the greater Buffalo area have a pound of Winchester 748 powder they are willing to sell or trade away ?

As usual, I have some really great bad ideas. I had one tonight and I started to look at it closer. Now I'm really interested in this idea and I don't know where to or whom to take it. Do we have any experienced and capable wildcatters here ?

As I have been reading, the US military has made a decision on their new cartridge. It will be a 6.8 X 51. Although I could not find a tremendous amount of information about it, what I did find is interesting. The case will be two pieces. The base will be steel, and the rest will be brass...

The son of one of my friends wants to build an AR platformed rifle for hunting varmints and predators. His budget is limited, so no Daniel Defense type parts, but he still wants a rifle that will shoot reasonably well. He already has a lower receiver ready to go. We looked at buying all the...

Today I have for you two boxes of Berry's plated bullets. These are 124 gr. Hybrid Hollow Points. 1000 pieces per box. $ 225 cash in greater Buffalo area. Willing (hoping) to trade for same quantity/ weight round nose bullets.

Step right up, don't be shy and see this ! Today I have for you this gently enjoyed FLIR THERMOSIGHT PRO PTS536 thermal weapon mounted scope. I bought this scope just over two years ago, and it works perfectly. Some of the specs: Base power is 4X, with electronic zoom of 8X and 16X Big 50...

Looking for an old refrigerator. I don't care if it works. It MUST have a latch type door with key lock. Tell me what you have. I can pick it up.

I found a few AR-15 lowers in a box the other day, and I got to thinking about what I should do with them. I already have AR's built into every configuration I desired. I have .204 Ruger's and .223 Wylde's set up for hunting predators. I have several 5.56 and .300 Blackout set up for home...

I have 50 pieces of once fired brass. It has been cleaned in the ultrasonic tank, but no further processing. This is range pick-up. Free to whomever asks. I will mail it to you in a padded envelope, all I ask is that you reimburse the shipping costs. If you are in the greater Buffalo area...

I have this rifle and a person I know wants to buy it. I need help with a fair value. The rifle is as follows: Ruger M77 Mark II Target .308 Winchester 26" 1-9" heavy profile barrel Laminated wood stock, free floated barrel Nikon Monarch 8-32X50 ED side focus scope...

Looking to purchase a 5 station shellplate for an RCBS Ammomaster progressive press. I would be interested in renting one and returning it to you if that was a possibility. Anyone have one or know of a gunshop that does ?

I have built several AR 15 & AR 10 platforms from both 80% and stripped factory lowers, with great success so far. There have been the expected screw-ups, especially with the first 80% attempt. Since then, things have gone smoothly, and quality keeps getting better. For this next project...

Free to someone willing to pick it up. I have a 5 gallon bucket of wheel weights. Not all of them are lead, many are zinc but there is a bunch of lead there for someone willing to melt it down. I need to get this out of my garage, and I'm never going to find the time to melt it myself...

Harder to find than a leprechaun riding a unicorn. More elusive than a new Playstation console. These factory fresh Winchester Small Rifle Primers are all the same lot number. I have 4 bricks of 1000 for sale at $ 100 each. Western N.Y. ( greater Buffalo area ) will meet. Cash deal only, please.

I have a Tikka T3 rifle chambered in 7mm Rem Mag that I've been working on for a while now. I'm trying to find a pet load for it. I fully understand that this is a hunting rifle, and that any moose, elk, caribou or ram I may take with it will never know what hit them. That having been said, I...

Are GROV-TEC products any good or are they Chinese SHIT ? Anyone have any first-hand experience with them ?

Story pulled from Breitbart Police May Stop Cars with Out-of-State Plates to Enforce QuarantineJeenah Moon/Getty Images CHARLIE SPIERING24 Jun 20202,607 1:45 Gov. Andrew Cuomo (D) warned Wednesday that some out-of-state travelers to New York might be pulled over by police if they have license...

I'm in need of a nww tumbler. The first RCBS I had lasted about 12 years, and I beat the piss out of that one. When it died, I called RCBS to order a new motor. They said "Sure ! No problem ! $ 22 + shipping." The next day they called me back and said, "Sorry, we can't ship you just a...

To start this off, I should tell you that I have been reloading for a LONG time. A VERY LONG time. More than 35 years, in fact. That being said, I don't claim to know everything, and I still find myself wondering why things just don't seem to add up. Case in point : I have finally started...

I went to the range a couple days ago, and one of the guns I took with me was a Winchester 94. This particular one is chambered in .45 Colt, not that it makes any difference. Anyway, there was another club member there with his two young kids. One girl, I'm guessing about 8 and a boy, about 6...

This 1974 Gibson Ripper electric bass is in spectacular condition. All electronics work perfectly. Original hard case, strap and electronic tuner are all included. Full disclosure : the bridge cover was missing when I bought it, and a Fender style thumb rest had been installed. I have many...

I'm looking at a Pulsar CORE RXQ30V thermal scope. Not the least expensive thermal unit on the market, but I would consider it "entry level". Wondering if any of you have experience with this scope and could provide feedback. Primary intended use is predator hunting. I have a Gen2+...

An active law enforcement officer in Wayne County attended a meeting last week with the State Police and other local police agencies. One of the things that was discussed is ammunition background checks. The leader of the NY state legislature has been putting pressure on our Governor to...

This is a serious question I'm posing. Is it that these kids grew up with public school teachers constantly telling them that socialism was the only equitable system of government ? Is it that everyone is so damn selfish and entitled as to believe that their every need should be provided to...

I went to a gun show recently, and I purchased one of these grips. I intended to install it on my Ruger Precision. When I got home, I dug out the rifle and removed the grip. The new grip would not sit correctly because there is a diamond shaped protrusion on the receiver of the Ruger that...

I was reading a post in the "firearms for sale" section, and the seller mentioned the buyer's "BRADY BILL" being up to date. Admittedly, it has been several years since my last dealings at the pistol permit office, but....WHAT THE HECK IS A BRADY BILL ?

It will NEVER happen. What I would like to see, and what this country desperately needs, is this : The President and his cabinet actually ENFORCE THE LAW. Start cracking skulls. I read somewhere, that nearly 70% of Federal prison inmates are here illegally. Get them the hell out of...

From yet another inmate of the occupied territory of western New York. Please don't ask me why I haven't left yet, I DON'T KNOW WHY.