Old Iver Johnsons, What Gauge?

MuttCat

MuttCat

.44 mag
Messages
978
Reaction score
1,037
Location
Scary County
A friend has given me what use to be two shotguns. Two receivers with stocks attached. No barrels. Poking around, it seems they were made by Iver Johnson a long time ago. Very rusty and dirty, but both actions seem complete and both do work. Shame no barrels though. Anybody know a way to determine what gauge these things might be? Finding a barrel might be a chore, but they might be salvageable.
 
CaseHardened

CaseHardened

.450/400 Nitro Ex
U.S. Military
Messages
10,623
Reaction score
10,596
Location
Danvers, MA
Check out Gun Broker.

Iver Johnson firearms are rarely worth enough to spend much time on.

Don't get me wrong : I own a small collection of Black Powder era Cartridge revolvers made by them.

I like the brand, as it is affordable. Unlike most Colt, S&W, etc.

But they're not worth fixing unless you do it yourself.
 
MuttCat

MuttCat

.44 mag
Messages
978
Reaction score
1,037
Location
Scary County
Thanks Highlander, I'll follow up on that. True enough, not really worth getting crazy with. But I've got plenty of sandpaper, some extra time to kill, a Mossberg I'm restoring at present etc....got to get some Oxpho Blue too.

Heck, for a couple of bucks, even for wall hanger decorations, and there's two of them I could clean up to match, well, why not, they are antique. Somebody would go for them. I'll stick a couple of jpgs in here.
 
MuttCat

MuttCat

.44 mag
Messages
978
Reaction score
1,037
Location
Scary County
I had to get some picture of the bolt head on my SMLE anyway, so took some of my "junk". I know they look awful.

IV3.jpg IV1.jpg IV2.jpg IV2.jpg
 
repete

repete

.338 Win Mag
Messages
5,490
Reaction score
7,938
Location
Rochester NY
Probably 12 ga. but I'd be surprised if they used a different frame for 16, 20, or 28 or any of the others. It was cheaper to make the frames the same size and just fit the barrel fit the receiver. I have heard that they did make two different frames (strength wise) one large one smaller, but never confirmed that.
 
MuttCat

MuttCat

.44 mag
Messages
978
Reaction score
1,037
Location
Scary County
I did think that too. You know, for cheap shotguns they did have a bit of elegance. The trigger guards are quite fancy as is the way the pistol grips are made. I wonder if these were blackpowder guns?
 
MuttCat

MuttCat

.44 mag
Messages
978
Reaction score
1,037
Location
Scary County
I took a ride into Albany, went to the state library, and looked up a publication on taking these thing apart. Scanned the info and thought I was in business. And I was until trying to remove the barrel release lever. It is held by a small screw that would not budge...fought with it and quit. So, poking around the web, some guys says that screw is left handed...righty loosey. What the hell?

I'll try again. I had to shape a screw driver blade even to get at it. Anybody ever heard of this?
 
CaseHardened

CaseHardened

.450/400 Nitro Ex
U.S. Military
Messages
10,623
Reaction score
10,596
Location
Danvers, MA
MuttCat said:
I took a ride into Albany, went to the state library, and looked up a publication on taking these thing apart. Scanned the info and thought I was in business. And I was until trying to remove the barrel release lever. It is held by a small screw that would not budge...fought with it and quit. So, poking around the web, some guys says that screw is left handed...righty loosey. What the hell?

I'll try again. I had to shape a screw driver blade even to get at it. Anybody ever heard of this?
Click to expand...

Left-Handed ? Nope.

But shaping the blade to fit PERFECTLY is always critical with any collectible.

That is why I treasure my Harbor Freight freebies. They ain't bad to begin with, and I don't mind modifying them.

BTW, many top-class gunsmiths have special vise-like apparatus that forces the blade in just so - making cam out and marring impossible.

No precaution is extreme with a $10K+ Colt or Winchester.

On the other hand, an Iver Johnson - the TAURUS OF 1910 ?

:ROFL::ROFL::ROFL:

Aye, IJ's are all I can afford, too. :(:(
 
MuttCat

MuttCat

.44 mag
Messages
978
Reaction score
1,037
Location
Scary County
My thought was to get both receivers apart, clean, polish, cold blue, bling 'em up, and make something decorative. Maybe book ends or just conversation pieces...doodads for the mantle. So I watched a guy on YouTube take one apart, simple, and when he get to this one screw, he mutters this one is a pain, left-handed, and he struggles with it. I could not tell exactly how he got it out. Surprisingly nothing has been really rust bound.

I see that Numrich buys stuff, maybe I'll give them a call and see if they're interested.
 
MuttCat

MuttCat

.44 mag
Messages
978
Reaction score
1,037
Location
Scary County
Funny though, the guy in the vid basically muttered "left-handed", but know he did. The info I got from the state library, a publication by GUN DIGEST, said nothing about it.

I did send an email to Numrich, or Gun Parts Corp, with the above pictures attached, and asked if they were interested.
 
CaseHardened

CaseHardened

.450/400 Nitro Ex
U.S. Military
Messages
10,623
Reaction score
10,596
Location
Danvers, MA
MuttCat said:
Funny though, the guy in the vid basically muttered "left-handed", but know he did. The info I got from the state library, a publication by GUN DIGEST, said nothing about it.

I did send an email to Numrich, or Gun Parts Corp, with the above pictures attached, and asked if they were interested.
Click to expand...

I'm interested on how much they low-ball you.

In their defense, those parts are surely in very low demand.

It stands to reason that the very parts that wear out most often are the ones everyone wants but never have spares of to sell to Numrich.
 
MuttCat

MuttCat

.44 mag
Messages
978
Reaction score
1,037
Location
Scary County
No doubt.

I checked their online parts inventory for Champions though, they got next to nuthin. To be honest, the receivers and parts are mostly just dirty; finish is gone, and some surface rust but no pitting. And they do work.
 
CaseHardened

CaseHardened

.450/400 Nitro Ex
U.S. Military
Messages
10,623
Reaction score
10,596
Location
Danvers, MA
MuttCat said:
No doubt.

I checked their online parts inventory for Champions though, they got next to nuthin. To be honest, the receivers and parts are mostly just dirty; finish is gone, and some surface rust but no pitting. And they do work.
Click to expand...

They sound perfect for someone who's looking.
 
MuttCat

MuttCat

.44 mag
Messages
978
Reaction score
1,037
Location
Scary County
Quick reply from Numrich. Twenty dollars for all, they pay the shipping. Yup, I've checked GB a couple of times. Folks are asking for around $50 for receivers with stock. I think if you add up Numrich retail prices for all the component parts you're north of $100 for each receiver.
 
CaseHardened

CaseHardened

.450/400 Nitro Ex
U.S. Military
Messages
10,623
Reaction score
10,596
Location
Danvers, MA
MuttCat said:
Quick reply from Numrich. Twenty dollars for all, they pay the shipping. Yup, I've checked GB a couple of times. Folks are asking for around $50 for receivers with stock. I think if you add up Numrich retail prices for all the component parts you're north of $100 for each receiver.
Click to expand...

$20 is fair for someone who just wants to get rid of them. But it's light all right.

Depending on my mood I might take the $20, or more likely GB them for $75 for both.

BTW, these are Long Guns and can be mailed through USPS.

I'd put them in a LONGGGGGG box, tho. Less likely to raise eyebrows.

432 Mailability | Postal Explorer

Make sure you're mailing to an FFL and get the Paperwork beforehand.

If you know their date, they are likely old enough to be C&R and could go to a C&R FFL-03.
 
Robin

Robin

.475 A&M Magnum
Messages
18,652
Reaction score
39,740
Location
Livingston County
I have my Dads' old single barrel, 12 Ga. shotgun. The receiver looks just like those but the name on it is EXCEL. Probably made by Johnson for Western Auto or the like.
Robin
 
MuttCat

MuttCat

.44 mag
Messages
978
Reaction score
1,037
Location
Scary County
Twenty bucks doesn't motivate me, and ef all that ffl crap anyway. I'm going to stick with my plan and spif them up. The stocks are shot, I'll use them to make some sort of stand, and cut down the stock bolt for attaching the receiver. Or, use the receiver as a cigar ashtray! $100!
 
You must log in or register to reply here.
Top