Search results

"framed"

Phone, keys, wallet, gun...

Man. This has been a thing for 10 years and no days off of work?

Refresh and stop will defeat the popup. Then just listen to the article if it doesnt fully load

The weight and size is the issue. If it were as small and light as a normal battery put in an ICE it would be a no brainer. But we're not and probably never will get the batteries down to that size with the same mileage. Here's another idea though. Probably just as feasible.

Well, there must be all kinds of variations of this because I get a "salary". Anything after the 40 hours I get time and a half and double time for holidays. My hours are definitely tracked and is obviously how I get extra after the 40 hours. From what I'm told this is how it's supposed to be.

Still a little unclear. By their pay rate doesnt change do you mean the hourly pay is the same for all 50 hours or you don't get paid at all for the extra 10 hours?

Salary doesn't mean that whatever you work past 40 hours you don't get paid for. At least it's not supposed to. The govt itself does NOT allow this. Whatever you work past 40 hours you get paid time and a half. I don't know how companies get away with not paying extra over 40 hours. Maybe this...

Just think. There are brain dead people out there that will actually follow this advice. Because the news said so.

:ROFL:

Not gonna read the whole article as I got the gist from the first few paragraphs. I don't think there should be "unlicensed" pistols. That's that I guess. To further elaborate, if you are able to be on the streets then you should be able to carry a gun. There's this thing called the second...

I'm partial to the Chinese cadmium infused grips on the 1911. The nonfunctional compensator is a nice touch as well.

Let's get this party started already.

Hmm. So something like the ps90 is just squeaking by. Hopefully the butt of the rifle doesn't wear down.

You mean SBS?

Right. At the end of the day this is all nonsense. On the federal and state level. I will say though that if I would have bought any barrels/conversion kits that could go into my pistols back when I was in NY I would have NEVER reported it. But I guess some do.

It's been so long since I lived in that place of madness but I'm looking at my old permit right now. It lists the make, caliber, serial number and model. For calibers, some of the listed are 9MM, 44MAG, 5.45x37 (lol it actually says x37). Maybe it's different in different parts of the state but...

Understood but that's not what I'm asking. Say I put a 556 pistol with a 10 inch barrel on a permit. Why would I make it known if I buy other uppers in other calibers? They're just uppers. Who's to say I'm even putting them on the receiver? Or maybe I'm misunderstanding the OP.

Why the hell do the uppers have to be listed? Why would one even put that down if you were required to?

Simply cut off shipments of coffee goods. That will get peoples attention. Now. What would the equivalent of this be for gun rights? I can't think of any that would be effective.

If you slow the video down to .25, at 9 seconds you can actually see and hear the acorn drop. I thought maybe to him it sounded like a bullet from far away hitting the vehicle that got him spooked. There is a very distinct sound a bullet makes when hitting a car's sheet metal from distance and...

@Depick glad things are going well. @RooftopKorean the load master has been discontinued. I couldn't believe it. If you really want another one I would jump on it immediately. They are still out there but for how long who knows. After that it's just parts and service.

Did I really just see this?

There are simply too many variables and combinations to try and list all the fringe cases. How to handle fringe scenarios comes with years of experience. For example if I had a powder that I knew was suitable for 9mm but had a bullet I have never used before and has no data in the mainstream, I...

Freak

There may be someone that's actually even smarter if you can believe that. They hold the secrets of the universe.

Why are we exporting natural gas in the first place?

I think we've all done this at least a few times but if you're gonna do a bunch you should remove the firing pin.

Have you ever seen Man in the High Castle? That's what I always think of.

They work but they will have the absolute minimum spec. Sometimes when a round has to be given some help to get in a gauge it will go right into a barrel. Especially in something like a glock or ak.

Only one crime at a time sir. One crime at a time.

All the mini mills are pretty much the same within the same class. Just like every other chinese thing that comes from the same factory and has a different color paint added to it. And of course some have different features depending on going up and down in price. Think red dots. You get what...

There is of course plunge cutting to get rid of the bulk of material but again the precision will be an issue. I don't know how good of a drill press RTK has but if plunge cutting, he better make sure each hole is perfectly in line with the next. If not, the window(s) will have to be wider than...

Glocks aren't exactly collector's guns but I personally feel it would be a shame to do this to an OEM gen 3 slide. Imagine if someone milled a gen 2. Just saying. As far as the milling goes, the cross slide vice probably won't work as well as you think it will. Drill presses are really only...

Way over thinking this. Just take the belled cases that you have and full length size them. Then bell again and charge/seat. If I were you, and to keep things simple for now, try seating and crimping in two separate operations. Then use your barrel for the plunk test. Get a LEE factory crimp...

Mystery solved. ETA. Will you be using a vibratory tumbler or wet tumbling? If you're going to use a vibratory tumbler this may not even be an issue after your first firing. Reason being, a vibratory never gets the casings 100% clean. The carbon will act as a lubricant. The brass will also be a...

You could do that but... Work smarter not harder. If you have a drill or press with a big enough chuck you could chuck it up and polish it that way. It will be way more consistent. Also, use very mild abrasive. Very high grit sandpaper, Nu Finish or even Flitz although that's a bit more...

Honest question. How so? Again, the results are what matter. Would being more polished make an outcome any better? There are some that have such severe TDS that it wouldn't matter how much he "straightened up". Low information voters (aka useful idiots) will never be swayed. They will happily...

Agreed. Although a better (way better) choice than someone like say shit for brains that's in the white house now, DeSantis always and still does seem like establishment to me. The polished double speak politician is what we are actually disgusted with anymore. Say one thing and do another is...

Cool. Remember that the last mm or 2 from the top of the nipple is the critical part. That's what does the actual flaring. The rest of the nipple is superfluous besides alignment to get into the case.

This is all that matters. I don't know why people still get hung up on the personality. I'm sure we've all dealt with people in our lives that were absolute douche nozzles but were the best at what they did. I want someone that is the best to get the job done. I don't have to live with them.

Check the nipple (that's what she said). The rounded part that actually goes into the case mouth. Is it rough or smooth as a babies ass? It should be smooth. If not you could then polish it. Any method will do as long as it doesn't take a ton of material off. For obvious reasons. I've noticed...

I watched like 3 minutes and new he was just gonna try and sell something. Turned it off. I'm done with the fear mongering. If we're gonna get this party started then let's do it already.

I'm sure the Taurus would do just fine and the 16+1 capacity is attractive. If it did happen to malfunction, just fix it. Most issues people run into with guns can be fixed by a moderately mechanically abled person.

If they can muster up this type of coordination and numbers, why not band together to just not pay the taxes at all? See how well the country fares if there are no farmers.

Wait... There was a ban on guns at the post office?

Try this one instead. https://getadblock.com/en/

What ad blockers are you guys using. I don't have to use incognito, private window or do any funny stuff. Just get on and watch.

You're in a great position to make that change comfortably.

That's an excessively dirty case. It's definitely because of the light load. Better crimp will help a bit.