Search results

I prefer LPVO.

Their stuff is on the pricey side, but it's all quality machined parts. Other RP items on my lever are: load gate mag tube follower mag tube end cap quick takedown screw hammer spur extension

Replaced by Boyd's stock on my 1895G with the RangerPoint stock. Definitely a huge upgrade in terms of comfort and modularity. I also purchased the comb and 6 round quiver for the stock as well. Now my 1895G has the complete tacticool look and feel. All jokes aside, the RP stock is beefy and...

Almost a month since I purchased my Glock 21 Gen4 and still haven't been able to pick it up because they haven't mailed me my new permit and pink PA form. Premise permit still hasn't been renewed. I uploaded my renewal packet on 1/2. CCW permit still hasn't been assigned an investigator.

I've used both the M18 with the Wilson grip and the VP9, the P320 does print more but that's because I have a light and Romeo 1 Pro on it when I CCW in PA, VA, WV, TN, and NC. I'll probably stick with the VP9. I was also thinking the Archon but it's been difficult to find an IWB for it.

Same here, and as a lefty shooter the ambidextrous controls are nice. My main reasoning for a wheel gun for back up is well, I feel wheel guns are the most reliable and what's not better than reliable for a backup? Also in 9mm so I can share ammo between both if needed.

It's what I'd choose over what I have. Many of my Glocks are heavily modified which makes me not want to use them for carry. Simply for legality. The 1911 is just too heavy to IWB, but I do have a shoulder holster for it. I frequently carry that in PA. Archon Type B Canik SFX Rival Glock 19...

My tricked-out Beretta 1301 Tactical.

Once I get my NYC CCW and I have to select two guns to have on my permit it will be either the P320 with Wilson Combat grip/MK18 slide or HK VP9 hip/6-7 o'clock and Ruger LCR 9mm for ankle holster. I'm leaning more toward my VP9 for my primary over the P320. Any opinions?

She sounds more like a Constitutionalist than a Democrat. I have a feeling she may be a 2A supporter because of the way she speaks and holds true that the Constitution should be abided to and not circumvented. She frequently spoke about government overreach and not following the Constitution...

You know whats going on in NYS with the one-party control is getting out of hand when this lawyer who is a democrat is calling out the corruption. I'm sure she is in line with other people like Roseann Barr who has said frequently that she is and has been a lifelong democrat but their values...

I use 168gr Hornady A-Max and 44.2gr of CFE223 powder. I use these for my M1A.

I agree with people here in saying I do prefer the Lee dies compared to other companies. @Depick Glad you are getting into the swing of things. I'd offer advice but I still consider myself a new reloader even after 3-4 years. Best advice I can offer is get a nice powder dropper like the RBCS...

Finally got a hold of someone on the phone this morning. Apparently one hand doesn't know what the other does there; no surprise really. They didn't send me an email which acknowledges that my renewal application was received. They sent it this morning, in this email, it states that my current...

If the school administration and/or local/state municipality were against letting teachers arm themselves or have an armed school resource officer, the parents should counter sue for negligence on the part of the above parties mentioned above. The parents should also sue the school...

What's worse is, they don't answer the phone or and barely reply to emails. I once asked for a status on my CCW permit because it's been in the investigation phase for over six months and I was replied back in all caps letters paragraph essentially raging at me. I simply replied back with a...

The majority of the people who work in the licensing division are civilians. And the officers who work in licensing aren't in any rush to leave. It's a cushy administrative job. One of the officers I used to see on the regular in the old area i used to work in ended up at licensing. Believe me...

That's what my Beretta 1301 and Benelli M4 are for.

I applied for my CCW back in July 2023 and it's still in the investigation phase. A friend of mine applied on November 2023 and he already was approved. He never had any permits prior to this. One would think that it would be easier to vet me for my CCW since I currently hold a premise and...

I hope the violence in NYC ensues. These liberal turds need to understand that there is a consequence of their actions.

I guess the harsh permitting, CCIA training, and gun free zones work.

Carbon footprints only apply to the peasants. The elites will still do as they wish, the elites need to be punished and put in their place. It's as simple as that. All these are these are methods of control in the name of preservation i.e. gun control to "protect people", monitoring carbon...

I use Shooters Lube and Eezox. Been tempted to try Liberal Tears bacon scented.

Kind of useless for me since I never have the intention of loading shot.

Got the last of my shotshell supplies in. Gotta love Etsy for all these small little things, and I get to help support small 2A businesses. Nice little organizer for the Lee Load All-II bushings. Makes it a lot easier to find the proper sized Bushing. Also picked up four 12ga shell trays...

When will any of these tyrants who constantly violate our constitutional rights be held accountable? This is the exact reason the head of the NYSP should not be appointed but rather voted for. It's a direct conflict of interest that it is appointed. I feel like if it was a voted position then...

When I saw this I had a good laugh. I recall Whorechul and punk Adams telling NYers to take migrants into their homes. Would those Cops been justified in using deadly force since they were clearly outnumbered and getting physically assaulted?

Dremels and 3D printers aren't exactly tools for making ghost guns. They are generic hobbyist tools. You can make a shotgun out of hardware from Home Depot or Lowes, should they be labeled firearms components? Context is king in a situation like this.

Electronic devices (phones, computer)? Didn't know electronics were illegal. Exactly what kind of "tools" to assemble ghost guns? Last time I checked, when I work on my legal guns I use punches, screw drivers, allen and torx bits. And the ammo in excess of 600 rounds is not a law, but rather...

Then Führer Whorechul and the brown shirt purple tie jack boots would come and get me. And Leticia the Hutt would prosecute me.

@Acer-m14 that thing got terrible reviews. Anything sub $1000 seems to be subpar chinesium garbage.

No I haven't thought about a mini mill nor do I have the space.

Brooklyn and PA here. Welcome to the insanity.

Boredom! The slide finish is all marred up and to see if I can do it. Idle hands, you know...

I have a beat-up Glock 19 Gen 3 slide that I'm tempted to give a try in doing some cosmetic milling on. I was thinking about using my drill press with an end-mill bit and cutting a vertical window cut along the Y-axis of the slide. I'm sure using a punch to make divot so the initial drill bit...

Glock 21 Gen4. Came with original case, back straps, two mags, and Glock 20 slide for $475.

I found this little thing on Etsy. It's a great little do-dad that smooths out the operation of the Load Master press. It looks like some kind of caster wheel that the shell plate wheel bar rolls on. Definitely a must have, it was $23.

@Acer-m14 do you have to soot it every cast or just initially?

This lead was already cleaned. The seller said there should be low carbon because he used wood to flux it. He said for low velocity projectiles like slugs it should be fine.

Here's the video response he made for me

@kev74 Fortunecookie45LC did tests on the loads he did, they worked fine and pressures were well within norms. I will also be sending out the first five reloads I make for testing. @Beerman This is what I purchased to do my Shotshell slug reloading Amazon - Lyman 51st Edition Reloading...

I'll put together a list for you but I also had basic reloading tools already from doing rifle cartridges. The formula I'm using is a non-typical reload you would not find in a reloaders manual. Fortunecookie45LC made a video reply for me on his Patreon based off an older video he had made. So...

My pot, mold, and roll crimper arrived today.

She should deprive herself of oxygen.

Today I deprimed and resized hull/brass on 500 shells. Also received my Redneck Gold in the mail, nice clean 5lb lead ingots. Just waiting on some other tools to arrive in the mail. Lee Pro Melter pot Lee 690 round ball mold Hull roll crimp clamp vice Hull trimmer Roll crimper

You cannot own any AR platform rifles in NYC. There is an administrative code in place that bans them. The closest thing to an AR platform rifle that is semi-auto is the Fightlite SCR, ask me how I know? Anything that is AR patterned that isn't semi auto is fine. The horrific Troy pump AR is...

I'm torn on Elise Stefanik as VP. I guess he could do worse.

I trust Tulsi Gabbard more than I do Vivek.

Sic semper tyrannus.

Lowered price $180