Search results

Raytheon Technologies made it official yesterday. Fully Vaccinated by the new year. They have asked for every employee to give them their current vaccination status. Which I have submitted "Unvaccinated. Do not intend to be vaccinated" The fights on now. I expect to be fired before the new...

Vaccine mandate appears to be inevitable at my job. Management has had 3 calls with corporate in the last 24 hours, and it appears that info will be passed down to us supervisors within the next few days. Its very upsetting. I've spent my whole adult life working here, and have progressed from...

According to the NY regs, " An angler may operate no more than 3 lines with or without a rod. " My question is can I bring extra poles on the boat? For example, bring 5 rods and reels, but only three are in use at one time. This is on lake ontario if it makes a difference (which I don't...

looking for some brass for .243win

Ive got about 500 large rifles left, not as much as I wish I had. Fresh out of small rifles unfortunately.

I bought 5 pounds of Nobel 7000 for 25 bucks a pound from grafs on the 13th. Granted its not name brand, but it did have some pretty good reviews on a few European gun forums. Needed something slower for the .243 I just picked up. Unfortunately I dont see primers being available for a LONG time.

Just bought this on gunbroker, need to send the check out tomorrow. Model 70 in .243 with a heavy barrel (Ive always been a .30 cal guy, so this is my first small bore, besides 5.56) Ive been searching for a model 70 with a heavy barrel for awhile now. I wanted a 30-06 (similar to what Hathcock...

good idea. BUT, mot sellers on gun broker refuse to ship to NY, regardless of whether its to an FFL or not.

To the top

Would like to have a model 70 built like the one Hathcock carried. I've been window shopping Model 70 receivers on gun broker. Not cheap... Ruger Gunsite Scout. Only issue is I want one in .308 with a walnut stock, and a blued finish. They only offer a .308 with a wood stock in stainless steel...

Its not a high end chronograph. Its a basic Caldwell unit. But I was pretty careful with the setup, the bullets trajectory was consistent going through the sensors. My velocity results are in the ballpark of where they should be, based upon published load data, and loads I've seen floating...

I've been wanting to get my hands on some Varget. Hasnt happened yet. If I wasnt loading specifically for the M1 I would be able to open up my powder options a bit more. Varget and 4064 are about the slowest I can use with the gas system.

My 1903 with its original barrel from 1918 will outshoot my M1 all day. Fantastic rifle.

Brand new Criterion Barrel installed two years ago, less than 100 rounds through it. I haven't shot much lately. Last week was the first range trip I've made in a year and half. I've shot 1.5 MOA with this using 168 Speer's Match BTHP. I'm pretty finicky when it comes to powder and the M1...

I've been reloading for 9 years now, and I just picked up my first chronograph. I'm working up a new load for my Garand. 178 grn ELD-M, IMR4895.CCI200, mixed commercial brass. 6 shot groups (every group had a conistent flyer) so I omitted the flyer from the group size. So really 5 shot groups...

I'll pivot. I'm young. My life wouldn't be over. If I cant come up with a plan B at the age of 27, then I deserve to crumble.

I wont get it. Even if my employer mandates it. (which wouldnt surprise me if they did, big corporation) And no, not leaving the state. If we all leave, who's gonna fight? Fck Big Brother, and Fck Cuomo.

Doesnt matter. All of upstate NY can be red, and the state will still go blue. thanks to the NYC metro area.

12,000 dollars for every citizen+illegals?! Do people not understand that this country is already broke? What’s the national debt up to now? 26 trillion?

The 1917 was probably the best bolt gun ever made. This is coming from a huge 1903 fanboy.

Rather be safe than sorry.

Looking to buy an armorers wrench and a set of 5.56 headspace gauges. Doing a barrel install, figured I’d check here before ordering online.

Time to finish this AR build.

I usually avoid conversations about politics with someone who has different views than me. If someone has different views than me, I have zero desire to try and change their values. Luckily my immediate family is pretty much on the same page with everything. My 18 year old brother is a...

I’m a fan of longer barrels for a bolt gun. My vote goes to the 21 inch barrel.

I agree that he will be re-elected. What I’m worried about is the fallout after the election.

I’ve already accepted that fact. Our lives are going to change very drastically in the not so distant future.

Regardless of what the result of the election is, the fallout following will drive the country into turmoil. It’s going to get “interesting”.

Don’t quote me on this. If you reload with the intent of selling it, you would then be considered a manufacturer.

I second gun mag warehouse.

M1 Garand in .308. The Navy has some built for them. An original is $$$$$ but I’m pretty sure you can rebarrel an original M1 for .308.

Well the barreled actions from Fulton are 1500ish. So you’re better off buying one from Springfield.

Checked on my favorite local monument. All is well

You can buy a barreled action from Fulton Armory. Still trying to figure out if a ffl would accept a barreled M1A receiver for a transfer.

Build it however you want. Keep it a secret. Tell no one.

Compare it to the AR. How many people are forging and machining M14/M1A receivers? I'm assuming Springfield armory, and maybe another custom build manufacturer? On the flip side, there are quite a few manufacturers of AR receivers. The machining of the M1A is quite extensive, compared to the...

Own whatever you want. Don’t tell anyone what you have. Guide to the SAFE act.

The amount of calories burned would depend on the individual. I would burn significantly more calories than someone who weighs a hundred pounds less than me while running a mile.

That was just running one mile, with some low hills thrown in. I did two miles and my pace went to roughly 7:45 a mile. Not really looking to lose weight. I’m just trying to keep active while the gyms are closed. Strength training is my thing. But I have enjoyed the last few weeks of running.

Its been a rough few months fitness wise. Its been tough, I miss my barbells and atlas stones (I compete in strongman competitions) Started running a few weeks back. I'm running a 7:20 mile. Not bad for weighing 260, I must say.

Just had 8 pounds of the good stuff delivered today. Keeping the M1 well fed.

I've looked at the NY compliant factory built rifles, they just dont look right with the front sight installed on the gas block.

I've always wanted a M1A. In their factory configuration, they are not SAFE act compliant. The front sight/bayonet lug assembly makes it non compliant. If I buy a used M1A, without the front sight/bayonet lug installed, can I legally have it shipped to NY and transferred? Would an FFL give me a...

Be very worried when people are trying to erase history. I appreciate all statues, regardless of my personal opinions on the subject of that statue. I've gotta admit, when I went to Gettysburg last spring, General Lee's statue on the battlefield was one of the most awe shocking and "badass"...

Any other markings on the boxes? That stuff might be loaded to M2 specs. Not sure.

I’m lookin for some M2 ball. I’m okay with the corrosive stuff. Prefer if it’s already loaded on en bloc clips. I can find it all over GunBroker but no one wants to ship to NY. Hoping someone here may have some, or know if someone who may have some.

from the other day. 340 rounds of Korean M2 ball for my M1. Corrosive ammo, but its only reserve ammo in case the SHTF. I'm not the fastest reloader, it would take me months to handload this many rounds :tearsofjoy:

Whats next? What do we do next?

is the 30/06 still available?

Stopped watching football two years ago. No regrets.