tpmcman
22lr
Any suggestions of on the Blue Boolits 125 RN over ACC #2. Looking for low high gn suggestions, also COL too. I see published stuff on their web site. Just wondering what others might be using... Thanks
9mm blue boolits 125gn over ACC #2
- Thread starter tpmcman
- Start date
repete
.338 Win Mag
I'm not trying to be snarking (this time) but I never give load info for one very good reason, what would happen if I put out my favorite load and transposed two digits? You might loose two digits and then I would feel bad at least.
Best off to buy a loading manual, I don't even trust the website info.
Best off to buy a loading manual, I don't even trust the website info.
Col is a function of the individual chamber you want to fire the round from. This goes for every type of bullet you use, all round nose etc. Are not equal. You can use published powder weight to start as a minimum charge then ladder up.
I haven’t used AA#2 in a long time.
I would use the starting load fire the 124 grain plated bullet on page 4. On OAL I alway try to use max OAL first, make a few dummies and see if they feed reliably and check for the bullet engaging the lands. If either is an issue then reduce OAL and try again.
I would use the starting load fire the 124 grain plated bullet on page 4. On OAL I alway try to use max OAL first, make a few dummies and see if they feed reliably and check for the bullet engaging the lands. If either is an issue then reduce OAL and try again.
tpmcman
22lr
Thanks for feedback. Ive been reloading 9mm 124s for a while now using 3 different types of boolits. So I have fairly good experience with them. used both AAC 2 and N340. All 3 run around the same gn of each powder so I have a good starting point. (Plus the blue bullites has some data too.) Ive worked up ladders for all of them. I have also experimented with COL. A variety of COL works well thru my P365 from 1.060 for HP or flat nose, - 1.142 fmj. And thanks for the link. I have based my ladder on this data including the data from the blue bullet web site. I was just wondering if anyone had any different experiences and advice. Thanks all for the feedback.