Ar Gas System Help!

[chris1977]

It was their branded one so no name branded. Also I did it in 1/2 not 3/4. I need to stop and think a bit before I try typing. Yes I was only doing 1 rd per adjustment. I had started from all the way shut and wouldn't eject after 1 full turn tjen 1/2 turn from there forward. I did that 2x, once with each lower.

 

[dsdmmat]

Some brands are not wide open until 5 full turns.

 

[chris1977]

The adjustment screw was almost out. I was like there's no way this is supposed to be this way.

 

[chris1977]

So drulled it out yesterday. Going to the range in a bit to test it out. Hopefully it goes good. It ended up being .081. Not sure how accurate my harbor freight mic is.

 

[dsdmmat]

So drulled it out yesterday. Going to the range in a bit to test it out. Hopefully it goes good. It ended up being .081. Not sure how accurate my harbor freight mic is.

Start with the adjustment screw one turn out.

 

[chris1977]

Yup. Already have it set and ready to go. Was a little nervous doing it. Put a cleaning rod in it and marked the bit. Went so smooth. Cleaned it all up and ran the bore snake through it

 

[chris1977]

So pleased today. Took the wifes gun out yet again and this time it was a positive visit. Had it all working flawlessly. Then ran some reloads and it started acting up again. Went ahead and opened up another 1/4 turn and went good for another 30 rounds. Called it a day.