vago
9mm
I cant find it in anywhere , any ideas?
BCM Enhanced Lower part Kit
- Thread starter vago
- Start date
vago
9mm
I Need Bcm enhanced lower kit . i have the rest
any ideas? or mayne used another trigger like gisselle ?
any ideas? or mayne used another trigger like gisselle ?
BDinPutnam
.475 A&M Magnum
Why that one specifically?
vago
9mm
I really rely on the knowledge of a relative who is in the military. but he told me that I can also use parts of geissele ALG Defense ACT Advanced
BDinPutnam
.475 A&M Magnum
All parts are in short supply and overpriced right now.
Unless you have a specific purpose in mind and don't care what you pay, if you want to build a rifle right now I would get a parts kit that you can find and build and then swap out parts later. The rifle you have is generally better then the one you don't have.
I dont know the price point or availability right now but if you are looking for a decent kit with a trigger I would also look at CMMG. And some here may mock this but the Anderson stainless steel kit I used earlier this year was inexpensive with a decent trigger.
None of these options will be as "nice" as the drop in triggers you mentioned- but there's also all kinds of drop in triggers so depends on what you want this rifle to be.
Unless you have a specific purpose in mind and don't care what you pay, if you want to build a rifle right now I would get a parts kit that you can find and build and then swap out parts later. The rifle you have is generally better then the one you don't have.
I dont know the price point or availability right now but if you are looking for a decent kit with a trigger I would also look at CMMG. And some here may mock this but the Anderson stainless steel kit I used earlier this year was inexpensive with a decent trigger.
None of these options will be as "nice" as the drop in triggers you mentioned- but there's also all kinds of drop in triggers so depends on what you want this rifle to be.
Primary Arms had KAK and CMMG full lower Parts kits in stock as of Yesterday. I ordered 2 sets of the CMC lower kits without Trigger Group or Grip last week (I always install Custom triggers and ergonomic grips) which were also still in stock as of yesterday.
I always replace stock trigger groups with a Timney. I just like the crisp feel of them so it's my personal choice. Never tried a Gisselle, but I have heard pretty good things about them. Drop-ins are a little pricy though...
vago
9mm
thank you , for your suggestion
BDinPutnam
.475 A&M Magnum
vago
9mm
ALG Defense ACT Advanced Combat Trigger Group AR-15, single stage 5.5 lbs
Flat mil-spec trigger similar to Bcm also is economic trigger
Flat mil-spec trigger similar to Bcm also is economic trigger
BDinPutnam
.475 A&M Magnum
But do you specifically need and want a light pulling single stage trigger?
What application do you have in mind for this rifle?
What application do you have in mind for this rifle?
vago
9mm
BCM® MK2 Standard 14.5" Mid Length (ENHANCED Light Weight) Upper Receiver Group w/ MCMR-13 Handguard
vago
9mm
BCMGUNFIGHTER™ Stock Kit - Black
BCM LOWER
BCM LOWER
Celt
.450/400 Nitro Ex
I want a bcm complete lower, been waiting a while for them to be back in stock.
vago
9mm
BCM® MK2 BFH 14.5" Mid Length (ENHANCED Light Weight) Upper Receiver Group w/ MCMR-13 Handguard
last week i went in Primary arms they have a bcm lower completed with minimum dent 340 dollars i went for my card was already sold ..
BDinPutnam
.475 A&M Magnum
Reminds me of this-
Step one: identify and define goals.
Step two: ???
Step three: success!
I'm just busting your chops. Unless youre basically willing to spend more than you probably should (and who would i be to criticize?) the way things are right now you should be looking for decent parts that you can actually get. Otherwise you're going to spend the whole shortage chasing parts you may never get.
Step one: identify and define goals.
Step two: ???
Step three: success!
I'm just busting your chops. Unless youre basically willing to spend more than you probably should (and who would i be to criticize?) the way things are right now you should be looking for decent parts that you can actually get. Otherwise you're going to spend the whole shortage chasing parts you may never get.
vago
9mm
i get all the part in bcm bravo , i pay a regular price , and gey today the trigger for 53.00 dollars
Celt
.450/400 Nitro Ex
Damn, that sucks. Thankfully its not a "need", its a want.
holdover
.475 A&M Magnum
I have a BCM free float hand guard. Solid as a rock . I have a Gisselle trigger, nice but I like the Timney better myself.
wtf7301
22lr
I use a Geissele SSA Trigger. It's a 2 stage with about a 4.5 lb pull weight but it is pricey ~$200. I've used the LaRue MBT-2S trigger which is very comparable but will set you back a lot less. ~$70-80.
I like the much more predictable break of the 2 stage triggers and the 4.5 pull seems to be the sweet spot for my needs.
vago
9mm
Vapor
.308 Win
I have the alg act. Its not that good. About the same as the cheap palmetto NiB triggers.
The larue is much better.
The larue is much better.
vago
9mm
thank you
I really looking for Bcm lower kit , but is to hard to find . i bouth as an alteranive