Considering getting into Reloading

[RooftopKorean]

I have two Lee Loadmasters.

I love them, I use them for rifle reloading also but only for target loads. If I'm doing PRS I hand load match grade.

If you search the threads, I got a few upgrades for the Loadmaster which turns it into a great progressive press.

 

[Depick]

Progressive presses are awesome for loading pistol rounds, but not necessarily great for rifle rounds due to the extensive case prep needed. That being said, I happen to know someone that has a tricked out Dillon setup he would like to sell. If you're interested, PM me. I know you live close by.


I have an RCBS Ammomaster progressive press. It's 30-ish years old now. It has served well, and loaded tens of thousands of rounds. Very few things have ever broken on it, and all but one plastic tube was replaced by RCBS. The tube is no longer available, so I had to make my own.

I agree, progressive presses make reloading pistol rounds quick and easy. I don't like using the powder dropper with pistol dies though. I slow the process down slightly by throwing a charge with my Matchmaster, then filling the case. I found a funnel with a long neck works well for not needing to remove the case from the plate. If I did use the powder dropper I would add a Powder Cop to the press rotation. I just dont trust powder droppers when dealing with pistol rounds. So easy to over charge.

I will mainly be loading pistol ammo.

 

[ManualF150]

Since I've been reloading, I've never felt so secure in terms of having ammo, but it makes me want to shoot more.

Folks ask me how I can shoot so much and not care too much, it's cause I reload.

It's like feeling independent.

 

[FP1201]

Only ammo I shoot that I can't reload is Rimfire.

 

[Robin]

Reloading Rimfires 101

Reloading rimfires is tricky due to the lack of primers, but it can still be done with the help of the Sharpshooter .22 LR Reloader Kit.

gundigest.com

 

[FP1201]

Reloading Rimfires 101

Reloading rimfires is tricky due to the lack of primers, but it can still be done with the help of the Sharpshooter .22 LR Reloader Kit.

gundigest.com

We had a fellow and his wife that have a "prepared" mindset, super nice folks, they had purchased one of those kits and actually reloaded some .22LR came in showed us and we went out and shot it: seemed to work just fine! Didn't really accuracy test it, but did hit the target where aimed.
"Rimfire: ammunition has been around about 150 years, and given the technology of the age of inception, it's sad that we as sophisticated, modern men with access to cheap and plentiful technology seemingly lack the wherewithal to reproduce fine little cartridges of yesteryear...there are tons of 25 to 58 caliber Rifles that remain tied over the Mantle because no viable ammunition exists for it.

 

[ManualF150]

We had a fellow and his wife that have a "prepared" mindset, super nice folks, they had purchased one of those kits and actually reloaded some .22LR came in showed us and we went out and shot it: seemed to work just fine! Didn't really accuracy test it, but did hit the target where aimed.
"Rimfire: ammunition has been around about 150 years, and given the technology of the age of inception, it's sad that we as sophisticated, modern men with access to cheap and plentiful technology seemingly lack the wherewithal to reproduce fine little cartridges of yesteryear...there are tons of 25 to 58 caliber Rifles that remain tied over the Mantle because no viable ammunition exists for it.

I'm making it a 2025 plan on making it easier for me to reload 22LR. Possibly trying to get into recycling lead and casting my own 22LR bullets. First step is to have efficiency on reloading. Like to get it to the speed of reloading centerfire on a single stage press.

I need to work out how to get the crimp out from the firing pin too in an efficient manner.

 

[kev74]

I'm making it a 2025 plan on making it easier for me to reload 22LR. Possibly trying to get into recycling lead and casting my own 22LR bullets. First step is to have efficiency on reloading. Like to get it to the speed of reloading centerfire on a single stage press.

I need to work out how to get the crimp out from the firing pin too in an efficient manner.

Don't worry about removing the crimp. Second hit would probably hit in a different spot.

 

[Depick]

I wound up buying a lightly used Lee Loadmaster. It will come setup for 300 blackout. I’ll be mainly using it for pistol rounds so I’m sure I’ll have to buy a few parts to do so.

 

[ManualF150]

Don't worry about removing the crimp. Second hit would probably hit in a different spot.

I've found that true. However it's when you get a bunch of them. Like for example when I was practicing reloading them to get the right loads, I'd keep using a the same few (not even really cleaning them).

After some thought today on this topic, I might have a solution... but I need to test the theory.

May require additional tooling......

Right about now is when I need a CNC machine...

 

[fresch]

I wound up buying a lightly used Lee Loadmaster. It will come setup for 300 blackout. I’ll be mainly using it for pistol rounds so I’m sure I’ll have to buy a few parts to do so.

Make what ever holds the press rock solid.

 

[FP1201]

Make what ever holds the press rock solid.

What I have done for all m Presses is obtain a rectangle of 5/8" plate. figure out where the cross braces or most ridged part of the Bench Top with a couple inches hanging over the edge and drill 5/16" holes through the plate to secure it to the Bench, then set the Press on the plate and mark where to drill & tap holes to bolt the Press to the Plate.
The Lee Presses will likely use 1/4" bolts, and most others suffice with a 5/16" hole...Generally I use SAE (Fine) Thread but it really doesn't matter. While you're at it, if you have a Stand for your Powder Dropper, now would be a good time to D&T a couple holes for it as well.
Biggest mistake I've made was not leaving enough hanging over the edge so the ram and/or Handle cleared when stroked.
I do recommend using a Drill Press so the holes are straight, and metal that thick is going to need cutting oil.
It's a good idea to radius or at least sand/grind off the sharp edges, and if you're an overachiever, paint it.
As for actually mounting the plate to the Bench: 1/4" x 2" Lag Screws into Wood, or 1/4" Carrage Bolts and nuts if drilling through, don't forget to buy Bolts (Socket heads look good and are easier to get in/out) to bolt the Press to the Plate.

 

[fresch]

On mine I built an all wood wall in the basement (can add French Cleats) anchored to the floor above joists, then bolted the wall with (3) 3/8 hand bent threaded rod around a lally column. then took a Harbor Freight wood working bench bolted that to the wall, mounted press to the bench; zero flex.

 

[togmaster]

What I have done for all m Presses is obtain a rectangle of 5/8" plate. figure out where the cross braces or most ridged part of the Bench Top with a couple inches hanging over the edge and drill 5/16" holes through the plate to secure it to the Bench, then set the Press on the plate and mark where to drill & tap holes to bolt the Press to the Plate.
The Lee Presses will likely use 1/4" bolts, and most others suffice with a 5/16" hole...Generally I use SAE (Fine) Thread but it really doesn't matter. While you're at it, if you have a Stand for your Powder Dropper, now would be a good time to D&T a couple holes for it as well.
Biggest mistake I've made was not leaving enough hanging over the edge so the ram and/or Handle cleared when stroked.
I do recommend using a Drill Press so the holes are straight, and metal that thick is going to need cutting oil.
It's a good idea to radius or at least sand/grind off the sharp edges, and if you're an overachiever, paint it.
As for actually mounting the plate to the Bench: 1/4" x 2" Lag Screws into Wood, or 1/4" Carrage Bolts and nuts if drilling through, don't forget to buy Bolts (Socket heads look good and are easier to get in/out) to bolt the Press to the Plate.

Or you could just buy a mount.

UltraMounts™ – Inline Fabrication

ultramount riser strong mount mount stand inline fabrication reloading ammunition ammo hand loading hornady dillon lee lyman redding RCBS ERGO solid storage

inlinefabrication.com

 

[ManualF150]

I love my Inline Fabrication mounts. Built amazing.

 

[Depick]

Well my Loadmaster arrived today. It is pretty rough and was caked in grease and what seemed like 8oz of powder. I spent hours cleaning it just to get the shell plate to move.

It will be a bit before it is ready to go. I need to round up the parts to convert it for 9mm. I’m going to add a new case feeder and a bullet feeder.