Looking to trade my CZ P-07 for a CZ SP-01 or Glock 34 Gen 5.
The P-07 is milled for a Trijicon RMR (not included)(it should work just fine with a Holosun 407/507/508 but I havent put one on it) with the rear iron sight forward of the optic (this is why I say should but cant say for certain about the holosun) rear sight is a glock style suppressor sight and the front is a modified CZ sight. The slide milling, and sight installation and modification was done by "Fire 4 Effect" they also cerakoted it in "spartan bronze"
The CZ also has the following Cajun Gun Works upgrades:
Reduced Power Trigger Return Spring - part # RP-TRS
Roller Bearing - part # 97058
Self Defense Spring Kit - part # SPGK79
(With the 18lb hammer spring installed and 15lb spring included, also has original hammer spring)
*this package also included firing pin spring and firing pin block plunger spring which are installed.
Sear spring - part # 51820
The only parts needed for this P-07 to be completely "cajunized" would be their hammer (part # 91000) and the Short Reset Kit (part # 92030)
Also comes with 2 original P-07 magazines and 2 of the newer P-10c magazines (the P10c magazinehas replaced the orginal P07 magazine) and a JM Customs holster (holster just needs belt loop/clip, I would suggest either soft loops or the new DCC monoclip that replaces the inferior fomi clip that the holster used to have, shown in picture but not on the holster now)
Really looking to trade for a CZ SP-01 or Glock 34 Gen 5 (may consider even a HK P30 or possibly maybe MAYBE other offers) or willing to sell for $700
The P-07 is milled for a Trijicon RMR (not included)(it should work just fine with a Holosun 407/507/508 but I havent put one on it) with the rear iron sight forward of the optic (this is why I say should but cant say for certain about the holosun) rear sight is a glock style suppressor sight and the front is a modified CZ sight. The slide milling, and sight installation and modification was done by "Fire 4 Effect" they also cerakoted it in "spartan bronze"
The CZ also has the following Cajun Gun Works upgrades:
Reduced Power Trigger Return Spring - part # RP-TRS
Roller Bearing - part # 97058
Self Defense Spring Kit - part # SPGK79
(With the 18lb hammer spring installed and 15lb spring included, also has original hammer spring)
*this package also included firing pin spring and firing pin block plunger spring which are installed.
Sear spring - part # 51820
The only parts needed for this P-07 to be completely "cajunized" would be their hammer (part # 91000) and the Short Reset Kit (part # 92030)
Also comes with 2 original P-07 magazines and 2 of the newer P-10c magazines (the P10c magazinehas replaced the orginal P07 magazine) and a JM Customs holster (holster just needs belt loop/clip, I would suggest either soft loops or the new DCC monoclip that replaces the inferior fomi clip that the holster used to have, shown in picture but not on the holster now)
Really looking to trade for a CZ SP-01 or Glock 34 Gen 5 (may consider even a HK P30 or possibly maybe MAYBE other offers) or willing to sell for $700
Last edited: