DIY Shotgun Kit?

[pshift]

Building a Pipe Shotgun with the Pop-A 410 DIY Kit

Any prepared individual should have low-cost firearms on hand in the event of a long-term disaster. The Pop-A 410 pipe shotgun kit from Runway Sub-Cal requires just $35 in parts.

www.offgridweb.com

 

[Willyone]

Great. Now, soon, there'll be a fuk'n BG check needed to buy galvanized pipe

 

[Cavalry]

Other than having the knowledge to do it, which honestly is idiot simple, I see no reason to actually construct one of these. If we are at the point where people are making pipe zip guns because better alternatives do not exist are we to believe there will be supply of .410 shells?

 

[Willyone]

Other than having the knowledge to do it, which honestly is idiot simple, I see no reason to actually construct one of these. If we are at the point where people are making pipe zip guns because better alternatives do not exist are we to believe there will be supply of .410 shells?

We need bigger dia. pipe

 

[GOYABEAN]

We need bigger dia. pipe

Making Pipes Great Again

 

[GOYABEAN]

another good comment mangled by auto-carrot

C'mon man you know the

 

[FP1201]

Other than having the knowledge to do it, which honestly is idiot simple, I see no reason to actually construct one of these. If we are at the point where people are making pipe zip guns because better alternatives do not exist are we to believe there will be supply of .410 shells?

Ironic it'll cost more for the Shells than the zip-gun materials.

 

[Acer-m14]

converted 12ga pistol to 50bmg .. actually nothing changed ..



PS .. its also a great way to make full 12ga brass hulls

LOL

 

[ManualF150]

One can go to the hardware store and buy 22 caliber ramset blanks, ball bearings, some springs, nails, and a small tube and make a safe and accurate firearm. Requires minimal amount of tools, probably most here have already at their home/apartment.

I remember watching a video of someone making one, and even going all out and getting nice maple, staining it, and making a nice stock for a home made rifle. They wound up making it a smoothbore to shoot ball ammo (BBs/ball bearings) and lead airgun pellets using ramset blanks.

 

[kev74]

3D printer goes brrrrt.

 

[Willyone]

One can go to the hardware store and buy 22 caliber ramset blanks, ball bearings, some springs, nails, and a small tube and make a safe and accurate firearm. Requires minimal amount of tools, probably most here have already at their home/apartment.

I remember watching a video of someone making one, and even going all out and getting nice maple, staining it, and making a nice stock for a home made rifle. They wound up making it a smoothbore to shoot ball ammo (BBs/ball bearings) and lead airgun pellets using ramset blanks.

Does a .22 cal. pellet gun have rifling? Asking for a friend.

 

[ManualF150]

Does a .22 cal. pellet gun have rifling? Asking for a friend.

For .22 cal, all modern ones do. In fact, in the higher end air guns you can get whats known as slug liners that you can shoot bullets/slugs.

However, for example my Crosman 760 Pumpmaster isn't rifled. It's a smooth bore, but I find it very accurate. But that is a .177.

You can buy rifled barrels for the 760 Pumpmaster.

I have a nice .30 cal airgun that pushes 160 ft/lbs and has a 10 shot capacity.

 

[GOYABEAN]

Does a .22 cal. pellet gun have rifling? Asking for a friend.

And can legally be suppressed

 

[Willyone]

For .22 cal, all modern ones do. In fact, in the higher end air guns you can get whats known as slug liners that you can shoot bullets/slugs.

However, for example my Crosman 760 Pumpmaster isn't rifled. It's a smooth bore, but I find it very accurate. But that is a .177.

You can buy rifled barrels for the 760 Pumpmaster.

I have a nice .30 cal airgun that pushes 160 ft/lbs and has a 10 shot capacity.

I had a .22 cal Crossman rifle. I gave it to my nephew a long time ago. I forgot what model it was. Kind of wish I had kept it but he really liked shooting it so.... Back in the late '70s or early '80s I was finishing off a customers basement in a house they had recently purchased. I came across a Crosman American Classic .177 pellet/BB pistol under an old work bench the previous home owner had left behind. The people I was working for asked me to get rid of it, so I did, and I still have it LOL. Barrel is about 10 inches long and it's very accurate. "Ammo" is cheap too

 

[FRANKIE]

For .22 cal, all modern ones do. In fact, in the higher end air guns you can get whats known as slug liners that you can shoot bullets/slugs.

However, for example my Crosman 760 Pumpmaster isn't rifled. It's a smooth bore, but I find it very accurate. But that is a .177.

You can buy rifled barrels for the 760 Pumpmaster.

I have a nice .30 cal airgun that pushes 160 ft/lbs and has a 10 shot capacity.

Those 760’s are the 10-22’s of the BB gun world!

 

[ManualF150]

Those 760’s are the 10-22’s of the BB gun world!

I have a 760 that has the 5 shot sliding magazine. They don't make those no more and are getting harder and harder to find.

It's actually a reliable gun. I've shot rabbits with 10 pumps and 14gr pellets.

 

[dean3690]

It's best to get pipe without a seam on the inside which can hinder your loading your shells in the chamber. Check before you buy.

 

[Robin]

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

 

[ManualF150]

I love McMaster-Carr...

 

[Acer-m14]

welding shops and get a tank .. like the ones he is shooting the ball at .. LOL

makes for a great bowling ball .. you know what .. .. you gotta watch the reload for shot #2 lmao

 

[Grimscale]

If you put powder in the bowling ball finger holes does that turn it into grapeshot?

 

[ManualF150]

I wonder what would happen if Edwin filled an empty oxygen tank with tannerite, screwed the valve back on, and shot it with his 50 BMG?

That would have to be pretty interesting.

 

[Acer-m14]

I wonder what would happen if Edwin filled an empty oxygen tank with tannerite, screwed the valve back on, and shot it with his 50 BMG?

That would have to be pretty interesting.

i dont think putting the valve back on it would matter .. it would be just like a fuse hole on a canon .. not big enough to vent the explosion

i once cut open a 20g shot shell and put the powder into a empty bb gun C02 canister and then a green fuse in the hole ..

.. it hand grenade'ed

 

[ManualF150]

i dont think putting the valve back on it would matter .. it would be just like a fuse hole on a canon .. not big enough to vent the explosion

i once cut open a 20g shot shell and put the powder into a empty bb gun C02 canister and then a green fuse in the hole ..

.. it hand grenade'ed

I remember that video from long ago... always been impressed with tannerite...

 

[Steal2B]

"For 12-gauge slam fire shotgun, you’ll need ¾- and 1-inch diameter pipes, plus a 1-inch cap to thread on the end of the 1-inch pipe that’ll act as your receiver."

 

[ManualF150]

"For 12-gauge slam fire shotgun, you’ll need ¾- and 1-inch diameter pipes, plus a 1-inch cap to thread on the end of the 1-inch pipe that’ll act as your receiver."

Who carries the better pipe? Lowes or Home Depot? Or do we need premium pipe from like the local mom and pop hardware store? Asking for a friend.