Robin
.475 A&M Magnum
Or did you mean the 8mm? I wish it was an AR, hah!
Robin
Robin
FAVORITE LOADS BY CALIBER & PROJECTILE.
- Thread starter HighlandLofts
- Start date
HighlandLofts
6.5 Creedmoor
What type of rest are you guys using? I bought a Caldwell double bar type lead sled. Just have to get the rifle dies set up and pump some ammo out. We still don't have any decent dry-warm weather yet, I can't stand shooting in the rain plus there is snow still up in the higher elevations where I like to go shooting.
https://www.amazon.com/CTK-Precisio...UTF8&qid=1490689700&sr=8-34&keywords=gun+rest
Works good for my ARs
Works good for my ARs
I shoot prone supported with a bi pod.
I use a sandbag front and rear for bench and for the other shoots I do offhand unsupported.
Kent Goldings
.357 mag
I use a Caldwell lead sled solo.
SigSweet
.45 acp
Favorite Pistol load for 9mm
Pistol
Sig P320 Compact
Barrel = Stock 3.9 inch with approx 7200 rounds through it
Bullet = Xtreme 135gr Flat point plated sized to.357
Powder = Titegroup @ 3.628 grains (avg of 10 drops from the dillon)
Primer = WSP
OAL = 1.169 ( this will not feed in my ppq m2, bullets are slightly too long for the mags)
Originally purchased the 135grs from xtreme to build a load to match my hornady carry rounds in 135gr.
I dont have any targets with tight groups but offhand this is the only load I have hit a 6 inch steel plate @ 50 yards 100 times in a row & at 10 yards can place 10 shots within a 3 inch group (group size is me but says a lot for the round since my usual 115gr berry's is consistently about a 4 inch group at 10yards)
Pistol
Sig P320 Compact
Barrel = Stock 3.9 inch with approx 7200 rounds through it
Bullet = Xtreme 135gr Flat point plated sized to.357
Powder = Titegroup @ 3.628 grains (avg of 10 drops from the dillon)
Primer = WSP
OAL = 1.169 ( this will not feed in my ppq m2, bullets are slightly too long for the mags)
Originally purchased the 135grs from xtreme to build a load to match my hornady carry rounds in 135gr.
I dont have any targets with tight groups but offhand this is the only load I have hit a 6 inch steel plate @ 50 yards 100 times in a row & at 10 yards can place 10 shots within a 3 inch group (group size is me but says a lot for the round since my usual 115gr berry's is consistently about a 4 inch group at 10yards)
Kent Goldings
.357 mag
I tweaked the recipe. Best page ever. The first group was the one I used to zero the scope.
HighlandLofts
6.5 Creedmoor
Some nice shooting going on here, keep up the good work, I'm sure others are enjoying this thread as much as I am.