Gas key staking tool

dwa12479

dwa12479

.338 Win Mag
Messages
7,064
Reaction score
14,508
Location
Dark Side of the Moon
So I'm putting the finishing touches on a couple of NY Fugly featureless builds for a friend. The DPMS kits that he bought came with the BCG in need of complete assembly. Everything is done except for staking the gas key screws. I installed them with red loctite for now just to get them up and functional, but he's planning to keep these and use them for, well, ever I guess. The Brownells gas key staking tool seems to be the best on the market, but is on backorder at the moment. I'd prefer not to field stake them. Wondering if anyone has the Brownells tool or an equivalent that I could rent/borrow in the Monroe County area. I'll drive a decent distance to pickup and drop off.

www.brownells.com

AR-15/M16 CARRIER KEY STAKING TOOL | Brownells

Precision-machined, solid steel tool lets you stake the carrier key screws the best way—from the sides—to ensure they don't back out under the most strenuous rapid-fire conditions. Eliminates the hassle of trying to stake the screws with a hammer ...
www.brownells.com www.brownells.com
 
meketrefe

meketrefe

.450/400 Nitro Ex
Messages
12,806
Reaction score
16,330
Location
Dexter, ME
dwa12479 said:
So I'm putting the finishing touches on a couple of NY Fugly featureless builds for a friend. The DPMS kits that he bought came with the BCG in need of complete assembly. Everything is done except for staking the gas key screws. I installed them with red loctite for now just to get them up and functional, but he's planning to keep these and use them for, well, ever I guess. The Brownells gas key staking tool seems to be the best on the market, but is on backorder at the moment. I'd prefer not to field stake them. Wondering if anyone has the Brownells tool or an equivalent that I could rent/borrow in the Monroe County area. I'll drive a decent distance to pickup and drop off.

www.brownells.com

AR-15/M16 CARRIER KEY STAKING TOOL | Brownells

Precision-machined, solid steel tool lets you stake the carrier key screws the best way—from the sides—to ensure they don't back out under the most strenuous rapid-fire conditions. Eliminates the hassle of trying to stake the screws with a hammer ...
www.brownells.com www.brownells.com
Click to expand...

Don't need the tool. It is a scam.
What you need is a nice vise and a few pices of wood to center the key and locktite and a hardened steel punch.
if you don't have one buy a large masonry screw that is very hard steel and will cost you $1.
The key is to take your time and square everything nicely. I could describe the process here but you should
have dozens of refrences online and youtube.
let me know if you don't find them.
 
kev74

kev74

20×102mm Vulcan
Messages
49,998
Reaction score
158,181
Location
Orange Co.
This will do the job.

iu
 
Mosinitis

Mosinitis

.338 Win Mag
Messages
8,391
Reaction score
7,805
Location
NY state
Whenever I get a new BCG, I always go over the staking marks with a center punch to make staking marks deeper. All of my first Bushmaster BCG's had the same problem with carrier key working loose after a year or so. Maybe this improved, maybe not, but I still follow that routine and never had one come loose.
 
cgrutt

cgrutt

.338 Win Mag
NYGF Vendor
Monthly Donor
Messages
8,996
Reaction score
17,043
Location
Interwebz
These are the ones I have

20200412_153537.jpg

The larger one is for AR-10 and smaller one is for AR-15 BCGs.

More info here (mine are the original MOACKS newer version is shown in link)


Index tool to gas key screw with an Allen key through top hole, turn in screws on side until they bottom then tighten each one 1-1/4 turns. You can stake each side by reindexing gas key screw in second hole on top. Will get them in mail to you tomorrow.
 
You must log in or register to reply here.
Top