minderasr
6.5 Creedmoor
As the topic says. Which one and why? This would be for a gen 5 Glock 19.
TIA
TIA
Ghost Edge 3.5 or Glock OEM "-" Connector?
- Thread starter minderasr
- Start date
I'm running a minus connector in my g22 no complaints on my end. I was afraid to go too low out the gate and have too light of a trigger. But anyways I got mine through overwatch precision ti gp with their trigger. I like their coating it definitely is slick.
4 paws
.40 S&W
Tough to answer without knowing the intended application of the firearm.
minderasr
6.5 Creedmoor
Technically even though it's called "3.5" it actually reduces trigger pull to around 4.5 lbs (both connectors). From I've read it's the kits that may or may not cause light trigger strikes. I just want the connector.
I installed the edge on my Glock 43 and it made a huge difference. Not sure I want to go with the full kit.
Fair question. This is to be used for EDC...eventually.
misunderestimated
.223 Rem
I use the stock Glock ones with a 50 cent trigger job (quick polish) I was always afraid to use after market.
minderasr
6.5 Creedmoor
In my gen 3 G17 & G19 I have the Apex action enhancement kit. I also did the polishing job. Triggers are very much improved after this.
Unlike some who use a dremel, I just polished using a little Maas and a q-tip.
4 paws
.40 S&W
With that being said, my personal belief is to leave stock. For a dedicated competition gun, I would offer an opposing view.
Acer-m14
.950 JDJ
this is NY .. for edc keep it stock .. if you got into a pickle and had to use it .. you know dang well NY will say oh you made it more deadlier by changing a part .. FUAC ..
for just a comp gun .. go all out ... do what ever works for you ..
for just a comp gun .. go all out ... do what ever works for you ..
Marine Cpl
.577 Tyrannosaur.
Urban myths suck.
Eddie Gunks
.338 Win Mag
minderasr
6.5 Creedmoor
We seem to have strayed from the original question.
Eddie Gunks
.338 Win Mag
Welcome to ny paranoid forum.
Wait! They are here to get me. I hear them. Where is my tin foil? OMG.......
minderasr
6.5 Creedmoor
Do you have this setup? What kind of trigger pull are you seeing?
I do; it's my EDC, but I don't remember what the pull weight is. I have the carry spring in it and it is very smooth, but I also have the Overwatch Precision DAT V2 trigger in it. The Overwatch trigger didn't make that much difference in the pull, I just changed it bc I hated how sharp the front of the Glock trigger was.
Dont listen to this bull shit.
Fuck people who keep pushing this type of hysteria
A good shoot is a good shoot.
As for the OP question, from time to time Overwatch precision has their 3.5 - connector with NP3 coating.
Deff. My vote for that
But I'm not sure if this works with the gen5 since they chanced a few things dimensionally
NP3 Glock OEM "Minus" Connector
Last edited:
@minderasr what trigger are you going to run with this? Stock? Aftermarket?
Have you looked into flat faced triggers, you might not believe it, but even with a stock pull weight a flat face feels just so much fucking nicer. With that said yes get a - connector as well it makes a decent/good trigger so much better
Have you looked into flat faced triggers, you might not believe it, but even with a stock pull weight a flat face feels just so much fucking nicer. With that said yes get a - connector as well it makes a decent/good trigger so much better
speedkills27
6.5 Creedmoor
I ran an edge in my G23 EDC gun and loved it
Exonautic
.308 Win
Customize the fuck out of your gun if it makes you shoot it better and it's still reliable. There was only one case that tried using anything about the specific legal firearm that was used. They all laughed at the prosecution and said that isn't evidence. I'll post it up when I get to my desk.
edit:
damn, that case was different than how it was explained to me.
Trail of evidence
not gonna copy paste the whole thing, and I'm sure many of you have probably read this already but it's an interesting read.
edit:
damn, that case was different than how it was explained to me.
Trail of evidence
not gonna copy paste the whole thing, and I'm sure many of you have probably read this already but it's an interesting read.
Last edited:
Marine Cpl
.577 Tyrannosaur.
I went with the Ghost Ranger 4.5 and like it. From what I've read, the Gen 4's have about half a pound extra pull. This connector puts the pull back to what a stock Gen 3 had. The reset is crisp and short.
I've tried the 3.5 connectors but didn't like them. The wall was eliminated and I never knew when it was going to strike. The reset was also weaker. With the 4.5 Ranger, the creep goes to the wall and after the wall it breaks. The reset is also strong.
I've tried the 3.5 connectors but didn't like them. The wall was eliminated and I never knew when it was going to strike. The reset was also weaker. With the 4.5 Ranger, the creep goes to the wall and after the wall it breaks. The reset is also strong.
minderasr
6.5 Creedmoor
I have an Ghost Edge in my G43 and it's decent, I like it. Certainly better than stock. I also have Apex action enhancement kits in my gen 3 G19 and G17. Love that setup. Haven't decided yet, I was hoping to save a little money. But I may just spend the extra cash and get the action enhancement kit for the gen 5 G19.