GO-FAST Parts for Ruger PC Carbine

[11inarow]

Ruger PC Carbine Competition Package
Tim at Taccom's RPCC:
Mine is ready to rock.......The go fast parts are the one's I make at TACCOM:

• Quote

 

[11inarow]

You won't need the comp, thanks to the Godfather.
The mag button now comes with a lever to be activated by your trigger finger; use either, your choice.
Extremely well made as is everything Tim makes. (You can call him; the number on his site is his cell.)
Everything but the comp is about $125 shipped.
It's not AR parts (it's not an AR and you have to get over that).
Prediction: Volquartsen will make a drop in trigger group that will drop at 2 1/2# +- (note: the 10-22 trigger group will not fit the RPCC; don't even try it).
See you; I'm off for a week in the woods and taking the RPCC....WOOOOOHOOOOO!

 

[seezur]

Is there somewhere to get that cheek riser? Can’t find it on their website but could really use one to get proper cheek weld with a red dot.

 

[Edwardteach72]

Is there somewhere to get that cheek riser? Can’t find it on their website but could really use one to get proper cheek weld with a red dot.

There is no need for a cheek weld, this gun isn't an ar15, ruger made it perfect otb, what do you hate ruger or something

 

[Marine Cpl]

That kit has an adjustable stock. Nice!

 

[nortatoga]

Is there somewhere to get that cheek riser? Can’t find it on their website but could really use one to get proper cheek weld with a red dot.

This link may help you?

Comb Raisers and Cheek Pads

 

[seezur]

A,v, b.

This link may help you?

Comb Raisers and Cheek Pads

They’re not the same as the ones in the OP, but they look pretty good, especially the non permanent options. I was just hoping someone figured out a snap on solution for those grooves on the PC 9.

 

[nortatoga]

A,v, b.


They’re not the same as the ones in the OP, but they look pretty good, especially the non permanent options. I was just hoping someone figured out a snap on solution for those grooves on the PC 9.

I see what you are saying, snapping it to the groves would be a good idea! I'd watch their site they may introduce it soon?

 

[nortatoga]

@seezur this is from shopruger.com This may be what is pictured , trimmed to follow the groves?

Sorbothane Cheek Pad-ShopRuger

 

[11inarow]

@seezur That is a Kickeeze 1/4" rifle cheek pad. Cheek-Eez semi-permanent recoil pads | KICK-EEZ

Brownells has them a lot cheaper.

 

[11inarow]

I've got everything on the gun (no not the comp) and all is great! I just now ordered another charging handle and Taccom has a notice up that orders may take a couple of days longer "due to unexpected high demand." In Taccom instructions for the mag well, it says to place it on the gun and strike it with your hand or hammer...got a hurt hand and would not hit it with a hammer. Placed one side of the mag well on the gun and pressed the other side on with a hand held carpentry squeezer from HD, etc. It snapped into place solid. Extremely pleased with everything. Green CT laser to go on tomorrow.

 

[Phauxtoe]

This link may help you?

Comb Raisers and Cheek Pads

ever stick these on a 10/22?

 

[nortatoga]

ever stick these on a 10/22?

No I have not . But I will look into these pads that @11inarow just posted about.

 

[11inarow]

I got the green Crimson Trace CMR-206 mounted on the mini-rail at the front of the handguard (easy). Other than being fun, it is reported to be very useful in engaging targets around the weak side of cover...but I'm thinking it's going to be more fun than anything else. Supposed to be good out to 50ft, mine is co-witnessed with POA out to 30ft. Yes, the laser is permitted on PCC Division guns. I'm wondering if the laser would be more useful in a home defense role? Weight of the RPCC with Taccom parts (sans comp and ghost rings that came on it) and with laser is 7.05 pounds.

If you are into lasers, here's a deal(?) on the green CT CMR-206: Crimson Trace CMR-206 Rail Master @ TacticalGear.com

...because you also get one of these free from Crimson Trace (until 04-30-18): Current Laser Sight Promotions | Official Crimson Trace

 

[GTN]

I just ordered the mag release button and lever. 31.95 shipped.
I haven’t even shot my yet but I noticed that mag release wasn’t the easiest to use

 

[MikeyCNY]

Still no signs of an M&P Magwell... (I read here or somewhere about someone modding one of the current magwells)

I picked up my PC Carbine the other day.. surprised it didn't come with a bag like the 10/22 Takedowns. Guess I can use one of those bags that I have.

Not sure when I'll get to the range with it.. Beefy though, heavier than I expected.

 

[Target]

there is a youtube video where the guy mods the M&P mags by installing a square hole as seen on the front of the SR9 mags.

 

[GTN]

I just ordered the mag release button and lever. 31.95 shipped.
I haven’t even shot my yet but I noticed that mag release wasn’t the easiest to use

I installed the mag release button and I like. I tried the lever but because it’s plastic when I push with my trigger it just bends and doesn’t release the mag

 

[11inarow]

I have removed the lever and in it's place installed the button. When I had the button on the weak side, I had too many unintentional mag drops. Now it's on the strong side and easy to hit on my way to a fresh mag and no unintentional drops. (If you hold the carbine by the mag well with your weak hand, this won't work for you.)