HOmedepot has these for $99 by me

[Saltwater60]

DEWALT 20-Volt MAX Lithium-Ion Cordless Oscillating Tool Kit w/ 20-Volt Battery 1.5Ah, Charger and Tool Bag-DCS355C1 - The Home Depot
I needed one and just the tool is $129.
Just a bit the inventory was wrong. They had like 4-5 of them and inventory only said 1

 

[Depick]

I’ve got the Milwaukee version and damn is that a versatile tool.

 

[Toecutter]

Ive used them before they come in handy alot .

 

[Carlos Hathcock]

I have 2 cordless in the Bosch version and 1 corded Porter Cable. They are handy.

 

[masterswimmer]

I've got the Rigid and its saved my hide many times.

 

[Blimey]

I have the dremel. It is a must have tool.

 

[BDinPutnam]

Stupid question, what's it do / good for?

This is about the only 20v Dewalt tool I *don't* have.

 

[Saltwater60]

Stupid question, what's it do / good for?

This is about the only 20v Dewalt tool I *don't* have.

I had to install a bathroom vanity right against the wall. I had molding against the base of the wall because I had a wall mount sink previously. I used this so I didn’t have to remove the molding to cut it and reinstall it. They are good for notching things in place so you don’t have to remove them. I cut it nearly perfectly and no wall damage. Quick bit of caulk and you’d never know.

 

[BDinPutnam]

Sold! Lol. Might have a look at these. Thanks @Saltwater60!

 

[ProgSpear]

Listed for $179 in Utica. I have the Fein (the originator) in a corded version, and it is an invaluable tool.

 

[CaseHardened]

Sold Out ?

Anyhow, I have this:

Search Results For "oscillating"

Always 20% off w coupon. Sometimes even less.

It made the installation of a Bathroom Vanity much simpler.

I was forced to either customise the drawer, or do a bunch of plumbing reroute.

I chose cutting and gluing wood to cutting pipe.

I know how to cut and solder, (or cut and glue) and do a very good at it. But once it's set up and working, I hate to F with anything.

"If it aint' broke don't fix it"

I had help, tho...

 

[Saltwater60]

Listed for $179 in Utica. I have the Fein (the originator) in a corded version, and it is an invaluable tool.

My store had them listed for $179 as well and it’s the same kit. I walked in and found 5 labeled for $99. Also my stores inventory said one in stock. These were on the floor in front of an end cap with a bunch of other dewalt tools. You might have to just stop in and see if it’s there.
Best thing is that I needed this tool and found a deal when I needed something. That never happens.

 

[@thewheels]

Great tool but as usual, the real batteries are nearly as much as the tool.

https://www.amazon.com/DEWALT-DCB20...coding=UTF8&psc=1&refRID=1CGNQ5GBNWYG2YQ3EG6V

 

[BDinPutnam]

Great tool but as usual, the real batteries are nearly as much as the tool.

https://www.amazon.com/DEWALT-DCB20...coding=UTF8&psc=1&refRID=1CGNQ5GBNWYG2YQ3EG6V

FWIW I bit the bullet and bought two batteries so I always have one charged and one charging when doing projects.

 

[Cleck]

They're awesome tools. I have a cheaper corded version from HF that still kicks ass. Like some have said, I use it for trimming trim boards or cutting small things I don't wanna hit with a bigger saw. A

That being said, I sorely need to upgrade my tools from either 18v non-lith or 12v. My drill is easily 10 years old and shows its age a bit. The new 20v stuff is gold. That being said, it hasn't died yet, so I guess no reason to replace it

 

[Saltwater60]

I have 7 batteries I had 2 originals. Then on clearance at HD I found a drill and 2 batteries for $100 so I bought it, then my wife bought me 2 5 amp hour batteries and not I have the oscillating tool and the battery. I also have 3 charges. All for $500. Original set came with drill, impact driver, flashlight, and circular saw. I can tell you this circular saw is not useless either. I never use my corded one. I also picked up the reciprocating saw too.

 

[BDinPutnam]

I am with you on the circular saw, @Saltwater60. I like mine so much I never bothered to get a corded one.

 

[Saltwater60]

I am worth you on the circular saw, @Saltwater60. I like mine so much I never bothered to get a corded one.

I cut 4x4’s and everything with it. If I was building a deck or a huge project I’d bust out the corded one. When I build my shed I’ll use the good corded one I have.