I wonder if this stock can be modified to be legal

[zh448452302]

Hi everyone,

I want to buy this HTA 22/90 stock for Ruger 10/22, it has a thumbhole stock and a fore grip hole and detachable magazine at same time.

The overall length of gun will be 26.5 inches and the silencer is dummy. I wonder if I order a customized plug to block the rear thumbhole stock and probably a grip fin to half block the front foregrip hole, just like the pic shown below. Will this be legal in NY state? Thanks for all your comments.

 

[Acer-m14]

10/22 are bad in NY .. evil things ,, buy a Moisn ..

 

[BDinPutnam]

Hi, welcome, WTF?

 

[spat]

If that worked for that 10/22 it would work for a PS90 and I would own one now.

 

[zh448452302]

If that worked for that 10/22 it would work for a PS90 and I would own one now.

LOL but Ruger 10/22 is registered as a rifle. If I permanently disabled (well not really, but it's not like you can remove it any time, you still need tools to dissemble it) the thumbhole stock and foregrip, and overall length is 26.5', I don't really see anything that violet the Safe Act. As far as I know, if you have a detachable mag on a semi-auto rifle, you must go featureless. But...hmmm, as a beginner, I can't be sure.

 

[spat]

LOL but Ruger 10/22 is registered as a rifle. If I permanently disabled (well not really, but it's not like you can remove it any time, you still need tools to dissemble it) the thumbhole stock and foregrip, and overall length is 26.5', I don't really see anything that violet the Safe Act. As far as I know, if you have a detachable mag on a semi-auto rifle, you must go featureless. But...hmmm, as a beginner, I can't be sure.

PS 90 is a rifle too.

 

[dsdmmat]

LOL but Ruger 10/22 is registered as a rifle. If I permanently disabled (well not really, but it's not like you can remove it any time, you still need tools to dissemble it) the thumbhole stock and foregrip, and overall length is 26.5', I don't really see anything that violet the Safe Act. As far as I know, if you have a detachable mag on a semi-auto rifle, you must go featureless. But...hmmm, as a beginner, I can't be sure.

vertical foregrip You would need to block off the front of it so it could not be grasped. After that what is the point?

 

[togmaster]

The lemon isn't worth the squeeze.

 

[kev74]

That foregrip isn't "protruding". Or... its not a grip, its the front of the trigger guard. Pick your justification and stick with it!

Cut a slice out right about here and there is no more thumb "hole" - good to go! #winning!



Can you tell I don't give a crap anymore about these stupid laws?

 

[SomeSoldier]

Do what you can afford.

 

[Duke]

I don't know if the virus king would approve of that......

 

[E the massive]

No victim, no crime.

 

[Edwardteach72]

That foregrip isn't "protruding". Or... its not a grip, its the front of the trigger guard. Pick your justification and stick with it!

Cut a slice out right about here and there is no more thumb "hole" - good to go! #winning!

View attachment 73635

Can you tell I don't give a crap anymore about these stupid laws?

You dont hold a p90 where that red line is

 

[kev74]

You dont hold a p90 where that red line is

View attachment 73643

You can hold it wherever you want. This is still America (I think).

 

[DrBleachCocktail]

Do what you can afford.

The unSAFE ACT in a nutshell.

 

[BDinPutnam]

You can hold it wherever you want. This is still America (I think).

"This isnt Russia, Danny. Is this Russia?"

 

[Elwood]

Interesting first post, welcome.

 

[BDinPutnam]

Do what you can afford.

Anything is legal if you're wealthy enough.

 

[Curmudgeon]

vertical foregrip You would need to block off the front of it so it could not be grasped. After that what is the point?

The point also appears to be ungraspable

 

[Curmudgeon]

I think if you add one of those undermount shotguns like Billy used in Predator you're GTG cuz you cant grasp the grippy part.

Now the only question is, "where do I get an undermount 10ga for my .22?"

 

[ArmedCorgi]

Hi guys, I'm wondering if I do my build like this and pin and weld everything to the rifle and then weld it to the bench vise as is with maybe a layer of epoxy over top. Would that be NY legal? Thanks in advance.

 

[kev74]

Hi guys, I'm wondering if I do my build like this and pin and weld everything to the rifle and then weld it to the bench vise as is with maybe a layer of epoxy over top. Would that be NY legal? Thanks in advance.

You forgot the hood ornament.

 

[Edwardteach72]

I think if you add one of those undermount shotguns like Billy used in Predator you're GTG cuz you cant grasp the grippy part.

Now the only question is, "where do I get an undermount 10ga for my .22?"

The shot gun would then be an SBS (unless you use an 18" barrel)

 

[ArmedCorgi]

You forgot the hood ornament.

No I didn't. It's there, you just need to look harder.

 

[BDinPutnam]

Hi guys, I'm wondering if I do my build like this and pin and weld everything to the rifle and then weld it to the bench vise as is with maybe a layer of epoxy over top. Would that be NY legal? Thanks in advance.

It's not wearing a mask.

Go directly to jail. Do not pass go, do not collect $200.

 

[gun_slinger_boy]

Make sure to get the shell deflector for maximum realism.

 

[DrBleachCocktail]

It's not wearing a mask.

Go directly to jail. Do not pass go, do not collect $200.

I guess I’ll just have to put a mask on this CSW for NY compliance Good for CA good for NY.

 

[meketrefe]

who said that is a thumb-hole stock? It is part of the firearm chassis.
In fact I don't see much of a stock at all!

This is what is sold when you look for thumb-hole stocks.




Otherwise, alternatively...

 

[kev74]

It's not wearing a mask.

Go directly to jail. Do not pass go, do not collect $200.

Ok, Karen.

 

[meketrefe]

In any case who would want a firearm to look like that?
Those P90 are uglier than domestic violence.
A pretty good way to ruin a beautiful 10/22.