kev74
20×102mm Vulcan
Brass racist!
I'm curious to hear how the Bulge Buster does. I expect it will work fine for what you're doing.
Lee Bulge Buster
- Thread starter Darth
- Start date
I'm curious to hear how the Bulge Buster does. I expect it will work fine for what you're doing.
ImpeachObama
9mm
Start doing it. I think it will improve your situation. I do it and never have a problem. Maybe look at bringing the setting for your sizing die lower on the case just above the shell plate touching. ?? I won't hesitate to shoot some lube up in the decap-sizing die either on an occasion. I'm using Dillon stuff, carbide dies. 40 cal use to give me a problem. Not any more. Hornady One Shot lube is what I use. Any of them will work.
Acer-m14
.950 JDJ
my FFL BFF has sheep and some lambs .. free case lube
.. meet Rosy the case lube'r lol 
ImpeachObama
9mm
No funny.
Phazer
.338 Win Mag
Used IsoHeet + lanolin for years.
UPDATE: USPS (FUUSPS) delivered the bulge buster today and the 40/10mm FCD yesterday.
I ran all of the suspect (non-plunking) loaded rounds through it. After that I plunk tested them all. All plunked and dropped free. Loaded a mag of just the suspect rounds that had now been de-bulged. 100% reliability in the DW.
The brass still showed a line, but you could no longer catch it with a finger.
0% Kabooms.
So let it be known that it may not be the best idea to shoot sloppy tolerances Glock stuff in a Match barrel without de-bulging it, especially if the previous life of the brass was thermonuclear loadings.
Problem resolved.
I ran all of the suspect (non-plunking) loaded rounds through it. After that I plunk tested them all. All plunked and dropped free. Loaded a mag of just the suspect rounds that had now been de-bulged. 100% reliability in the DW.
The brass still showed a line, but you could no longer catch it with a finger.
0% Kabooms.
So let it be known that it may not be the best idea to shoot sloppy tolerances Glock stuff in a Match barrel without de-bulging it, especially if the previous life of the brass was thermonuclear loadings.
Problem resolved.
gun_slinger_boy
.338 Win Mag
Any way we could still get a pic of the brass after being busted? Also. If you can still see the line it means that part of the casing has been worked hard. That's like a perforation line now. Don't load those cases hot!
They were lost in the snow.
repete
.338 Win Mag
Is that like a "boating accident"?
