Man claims he was paid $21,000 for 3D-printed guns at New York AG's buyback event in Utica

1075tech

1075tech

.338 Win Mag
Messages
7,153
Reaction score
17,442
Location
Escaped NY
This has been done a number of times across the country. It's only a matter of time before the AFT puppy killers charge someone for manufacturing/dealing without a license.



Any person (including any corporation or other legal entity) engaged in the business of performing machining, molding, casting, forging, printing (additive manufacturing) or other manufacturing process to create a firearm frame or receiver, or to make a frame or receiver suitable for use as part of a “weapon … which will or is designed to or may readily be converted to expel a projectile by the action of an explosive,” i.e., a “firearm,” must be licensed as a manufacturer under the Gun Control Act of 1968 (GCA); identify (mark) any such firearm; and maintain required manufacturer’s records. A business (including an association or society) may not avoid the manufacturing license, marking, and recordkeeping requirements of the GCA by allowing persons to perform manufacturing processes on firearms (including frames or receivers) using machinery or equipment under its dominion and control where that business controls access to, and use of, such machinery or equipment
 
Saltwater60

Saltwater60

20×102mm Vulcan
Messages
35,887
Reaction score
40,339
Location
Western NY
This is a great statement and all but confirms his story hilarious.
A statement sent from a spokesperson at the Attorney General's Office on Wednesday said:

“It’s shameful that this individual exploited a program that has successfully taken thousands of guns off the streets to protect our communities from gun violence. We have partnered with local police throughout the state to recover more than 3,500 guns, and one individual’s greedy behavior won’t tarnish our work to promote public safety. We have adjusted our policies to ensure that no one can exploit this program again for personal gain.”
 
spat

spat

.700 Nitro Express
Messages
29,961
Reaction score
63,187
Location
Formerly Geneseo, NY. Now free in AZ
He's doing it wrong.

You don't 3d print the guns.

He wants to do this in volume.

You 3d print the reusable *molds* and then cast the guns in epoxy or something.

Much higher volume possible.

Plus, you can cast around off the shelf steel parts for things liken the barrel easily that way too.

Actually, the 80% guys should start selling these molds. ATF can suck it. The mold isn't even 0% receiver. No part of it is a firearm.

Would that make the jug of resin and hardener each a 50% receiver LOL.
 
libertysnake

libertysnake

.338 Win Mag
Messages
8,845
Reaction score
16,390
Location
New York
spat said:
He's doing it wrong.

You don't 3d print the guns.

He wants to do this in volume.

You 3d print the reusable *molds* and then cast the guns in epoxy or something.

Much higher volume possible.

Plus, you can cast around off the shelf steel parts for things liken the barrel easily that way too.

Actually, the 80% guys should start selling these molds. ATF can suck it. The mold isn't even 0% receiver. No part of it is a firearm.

Would that make the jug of resin and hardener each a 50% receiver LOL.
Click to expand...

Make the system of oppression so busy and unsustainable that it will break. Exactly.
 
Jsmegs77

Jsmegs77

.308 Win
Messages
3,217
Reaction score
6,043
Location
Susquehanna Co. PA
None of the things he turned in could be considered manufactured firearms or parts of such. They’re essentially blue guns, modeled out of plastic. You might as well cast them as spat said.

I find it extremely amusing that he actually got paid for them. Who’s staffing these shit events? Can I turn in a cardboard thing that goes up and get money?
 
Acer-m14

Acer-m14

20×102mm Vulcan
Messages
35,928
Reaction score
38,491
Location
Livingston
1075tech said:
Any person (including any corporation or other legal entity) engaged in the business of performing machining, molding, casting, forging, printing (additive manufacturing) or other manufacturing process to create a firearm frame or receiver, or to make a frame or receiver suitable for use as part of a “weapon … which will or is designed to or may readily be converted to expel a projectile by the action of an explosive,” i.e., a “firearm,” must be licensed as a manufacturer under the Gun Control Act of 1968 (GCA); identify (mark) any such firearm; and maintain required manufacturer’s records. A business (including an association or society) may not avoid the manufacturing license, marking, and recordkeeping requirements of the GCA by allowing persons to perform manufacturing processes on firearms (including frames or receivers) using machinery or equipment under its dominion and control where that business controls access to, and use of, such machinery or equipment
Click to expand...

Unconstitutional per NYSRPA vs Bruen .. there was none of this ... laws/regulations back in 1791 ...
 
Far king

Far king

.357 mag
Messages
558
Reaction score
1,029
Location
Barneveld ny
As much as l despise people who rip off tax payers in this case l gotta say good on ya to the guy.
Gun “ buy backs” are a joke as they seldom yield anything more than useless garbage no one wants
Our deceitful and vindictive AG now has egg all over her fat face because she owns this fuck up!
This clever guy played her foolish game and won although it may be short lived . The jack booted thugs may be on their way.
 
kev74

kev74

20×102mm Vulcan
Messages
49,998
Reaction score
158,183
Location
Orange Co.
"I'm sure handing over $21,000 in gift cards to some punk kid after getting a bunch of plastic junk was a rousing success," laughed Kem. "Gun buybacks are a fantastic way of showing, number one, that your policies don't work, and, number 2, you're creating perverse demand. You're causing people to show up to these events, and, they don't actually reduce crime whatsoever."
Click to expand...
:ROFL: :ROFL: :ROFL: :ROFL: :ROFL: :ROFL: :ROFL: :ROFL: :ROFL: :ROFL: :ROFL: :ROFL: :ROFL:
 
Acer-m14

Acer-m14

20×102mm Vulcan
Messages
35,928
Reaction score
38,491
Location
Livingston
You must log in or register to reply here.
Top