Marlin 1894C in 357/38 ejection issue

[FinBusDev]

I have a relatively new (2020) Marlin 1894C in 357/38. I am very pleased with its side gate ejection and ease of disassembly. Lately, however, the case ejection is weak, sometimes requiring tilting the rifle to the right to avoid jams. Do others exeprience this? If so what is the fix? Thank you.

 

[fresch]

Marlin 1894 (41 mag) with ejection issues...need HELP ! [Archive] - Cast Boolits

I was at the range today. the first time out with this 41 Mag, Marlin 1894. I am having some ejection issues with it. Last weekend, while setting up to reload some 41, I made a dummy cartridge to find the optimal COL (Cartridge Overal Length) for this rifle. This was the first time I...

castboolits.gunloads.com

Start here.

 

[Deplorable Me]

Check to make sure all your action screws are snugged down. This is when I have problems with mine. Check the mag tube screw on the bottom as well.

Also one of the recommended spare parts is the ejector spring. Someone makes an after market extra strength one (can't get to my shop to look it up right now.)

 

[FinBusDev]

Check to make sure all your action screws are snugged down. This is when I have problems with mine. Check the mag tube screw on the bottom as well.

Also one of the recommended spare parts is the ejector spring. Someone makes an after market extra strength one (can't get to my shop to look it up right now.)

Thanks for your reply. Took the gun apart and cleaned everything even though it was not dirty. Think you may be right about needing an extra strenghth ejector spring. If you can remember the manufacturer please send a note. Thanks.

 

[Deplorable Me]

Thanks for your reply. Took the gun apart and cleaned everything even though it was not dirty. Think you may be right about needing an extra strenghth ejector spring. If you can remember the manufacturer please send a note. Thanks.

Wild West Guns Ejector Marlin 336, 444, 1894, 1895 Steel Blue

Poor weather conditions and heavy use in Cowboy Action events can cause early failure from your factory ejector. This 1-piece steel ejector replaces the...

www.midwayusa.com

MARLIN 1895/336/444 BEAR-PROOF EJECTOR | Brownells

EDM-cut, one-piece ejector gives positive, reliable ejection with the heaviest hunting loads. Replaces the lighter, and easily broken, two-piece, factory part. Prevents broken parts from jamming action. Improves ejection, ensures empties are throw...

www.brownells.com

WWG Bear Proof Ejector – Wild West Guns

www.wildwestguns.com

Basically look for the replacement springs folks use for Cowboy Action Shooting.

 

[Deplorable Me]

I can't wait until Marlin/Ruger start producing 1894s again. I want to see some more ported and SS models in .44 and .357.

 

[1075tech]

I can't wait until Marlin/Ruger start producing 1894s again. I want to see some more ported and SS models in .44 and .357.

I want a JM pre-safety 1894 in 357. It's only a mortgage payment

 

[FRANKIE]

Wild West Guns Ejector Marlin 336, 444, 1894, 1895 Steel Blue

Poor weather conditions and heavy use in Cowboy Action events can cause early failure from your factory ejector. This 1-piece steel ejector replaces the...

www.midwayusa.com

MARLIN 1895/336/444 BEAR-PROOF EJECTOR | Brownells

EDM-cut, one-piece ejector gives positive, reliable ejection with the heaviest hunting loads. Replaces the lighter, and easily broken, two-piece, factory part. Prevents broken parts from jamming action. Improves ejection, ensures empties are throw...

www.brownells.com

WWG Bear Proof Ejector – Wild West Guns

www.wildwestguns.com

Basically look for the replacement springs folks use for Cowboy Action Shooting.

The Winchester model 12 used almost a carbon copy. And yes they do fail.