Russ Woody
.45 acp
I started by laminating 2 pieces of 3/4" CDX plywood together with glue and screws. Then I painted the whole thing with a couple coats outdoor brownish paint. I then glued up some blocks of 2 x 6 approx. 6"x 6" and glued them up about 9" long to look like a 6" x 6" log x 9" long so I can cut them out at a 10 degree angle on the miter saw. I screwed those to the bottom of the bench and then attached 1 1/2" floor flanges to the 10 degree blocks.