Kozak
.40 S&W
This is from my personal collection. I have to let this one go due to numerous unexpected expenses; one right after another... I have the least amount of sentimental attachment to this one.
I am certified COLT M16/M4/AR-15 Armorer. This was assembled to proper Mil-Spec standards where applicable (Barrel Nut, Castle Nut, Headspace, etc...)
Parts list as follows:
-Anderson MFG Lower and Upper Receiver. These are as close to a matched set without being an official matched set. They mate perfectly and lock up TIGHT! There is no "receiver wobble". No gimmicky plugs or set screws needed.
-Brand New Anderson MFG Bolt Carrier Group. (Only a couple of rounds fired after headspacing, to ensure proper function)
-Like New Anderson MFG 16" 5.56x45mm Barrel with 1:8 Twist. Less than 50 rounds shot through it. (Barrel nut/receiver threads were stretched and seated at 50 ft lbs).
-Matrix 13.5" MLOK Free Fload Handguard with full length picatinny top rail. (Set screws torqued to 30 in lbs).
-AERO/FN Upper Receiver Dust Cover/Forward Assist Assemblies
-COLT Brand 6 Position Adjustable Stock
-Carbine length gas system with low profile gas block (.750)
-A2 style pistol grip and Magpul MOE Foregrip (Foregrip is mounted on a detachable Magpul MLOK pic rail).
-Tacfire medium extended charging handle.
-Anderson Fire Control Group and Lower Parts kit.
-Yankee Hill Machine EZ pull takedown and pivot pins.
-Cross Armory fixed mag device. I will throw in a couple extra press fit plugs. This is if you decide to drill it out to move to another build.
-Magpul 10 rd Fixed PMAG
-KAK Phantom Style 1/2-28 Hardened flash hider.
-Brand Unknown Buffer Tube Assembly.
-Cheap Simmons Red Dot (I had a different optic mounted, but I am including this with sale so it has some form of sights).
I am pretty flexible with this deal. If you would rather have a Magpul MOE pistol grip, Daniele Defense foregrip, Magpul Angled Foregrip, no red dot, red dot on a riser or no extra furniture/accessories at all... then we can come up with a custom price for you.
I am asking $650 OBO FTF near the Rochester Area. I am willing to ship on the buyers dime. PLEASE message me with ANY offers you have. More pictures are available at your request. If you are still reading, thank you for getting through the entire post!
I am certified COLT M16/M4/AR-15 Armorer. This was assembled to proper Mil-Spec standards where applicable (Barrel Nut, Castle Nut, Headspace, etc...)
Parts list as follows:
-Anderson MFG Lower and Upper Receiver. These are as close to a matched set without being an official matched set. They mate perfectly and lock up TIGHT! There is no "receiver wobble". No gimmicky plugs or set screws needed.
-Brand New Anderson MFG Bolt Carrier Group. (Only a couple of rounds fired after headspacing, to ensure proper function)
-Like New Anderson MFG 16" 5.56x45mm Barrel with 1:8 Twist. Less than 50 rounds shot through it. (Barrel nut/receiver threads were stretched and seated at 50 ft lbs).
-Matrix 13.5" MLOK Free Fload Handguard with full length picatinny top rail. (Set screws torqued to 30 in lbs).
-AERO/FN Upper Receiver Dust Cover/Forward Assist Assemblies
-COLT Brand 6 Position Adjustable Stock
-Carbine length gas system with low profile gas block (.750)
-A2 style pistol grip and Magpul MOE Foregrip (Foregrip is mounted on a detachable Magpul MLOK pic rail).
-Tacfire medium extended charging handle.
-Anderson Fire Control Group and Lower Parts kit.
-Yankee Hill Machine EZ pull takedown and pivot pins.
-Cross Armory fixed mag device. I will throw in a couple extra press fit plugs. This is if you decide to drill it out to move to another build.
-Magpul 10 rd Fixed PMAG
-KAK Phantom Style 1/2-28 Hardened flash hider.
-Brand Unknown Buffer Tube Assembly.
-Cheap Simmons Red Dot (I had a different optic mounted, but I am including this with sale so it has some form of sights).
I am pretty flexible with this deal. If you would rather have a Magpul MOE pistol grip, Daniele Defense foregrip, Magpul Angled Foregrip, no red dot, red dot on a riser or no extra furniture/accessories at all... then we can come up with a custom price for you.
I am asking $650 OBO FTF near the Rochester Area. I am willing to ship on the buyers dime. PLEASE message me with ANY offers you have. More pictures are available at your request. If you are still reading, thank you for getting through the entire post!
