kev74
20×102mm Vulcan
I noticed this after taking my last shot the other day. The case must have started on its way out, hit something that dented the neck, flipped around and lodged in the bolt face.
Oddball AR Jam
- Thread starter kev74
- Start date
GOYABEAN
.950 JDJ
Ricochet off scope mount
kev74
20×102mm Vulcan
I bet I can't make that happen again!Ricochet off scope mount
dwa12479
.338 Win Mag
That's the new .332/ 6.65 round.... cutting edge technology.
Deplorable Me
.577 Tyrannosaur.
You sure you loaded the magazine correctly?
kev74
20×102mm Vulcan
The bullet went out the pointy end, so I think I did something right.
GOYABEAN
.950 JDJ
The case was either mooning the bullet or relieving excess gas 
Acer-m14
.950 JDJ
that bolt face is xyzpdqrainbow .. that casing wanted it from both ends .. LMAO
Last edited:
Acer-m14
.950 JDJ
also if that dust cover would only open and close on each shot .. that would never happen LOL
Acer-m14
.950 JDJ
now you need a 300 bo .. to save that brass .. snip and form .. lol
meketrefe
.450/400 Nitro Ex
stick a tiny piece of adhesive velcro to the deflector and its edge. use the soft part of the velcro tape.
this will slow down the spin snd save brass in the long term.
this will slow down the spin snd save brass in the long term.
Deplorable Me
.577 Tyrannosaur.
I was thinking weak ejector spring.
kev74
20×102mm Vulcan
The rifle has a 6.5 Grendel upper. Less than 300 rounds through it - probably closer to 200 rounds.
I don't think any repairs are necessary, just that it was weird enough to share.
As for the brass.... That's once fired. Nothing a trip through the sizer die and trimmer won't fix!!
I don't think any repairs are necessary, just that it was weird enough to share.
As for the brass.... That's once fired. Nothing a trip through the sizer die and trimmer won't fix!!
Some people cut the ejector spring or cut off 0.040" from the ejector for brass to pile up close at 1 o'clock for convenience. The problem is, this doesn't work 100%. Sooner or later you run into a problem. For recreational shooting it's not a big deal. For applications where this can ruin your day it's discouraged.
Acer-m14
.950 JDJ
how ever it got in there ass backwards we will never know . LOL ..
just like this brass ejection ..
PS ... Noir .. that's a Cartridge not a bullet .. and your holding a Cartridge .. not a bullet .. come on man .. LOL ..
just like this brass ejection ..
Wow, Bullets Go Off Inside Ammo Box After Ejecting Shell Casing Strikes It
PS ... Noir .. that's a Cartridge not a bullet .. and your holding a Cartridge .. not a bullet .. come on man .. LOL ..
Saltwater60
.950 JDJ
I took a training course with a guy once and he was missing the top of his finger and some one asked him jokingly if he shot it off. He said funny story and I’ll tell you it. He would unload his gun and he would rack the slide hard and catch the bullet on the way out. Well one time he went to do it and he missed the bullet, the round went back into the chamber and he hit the slide release. The slide closed, firing pin went forward, and he lost part of his finger when the round went off.
ManualF150
.308 Win
^^ All I can say is OUCH!
Carlos Hathcock
.450/400 Nitro Ex
Ahah. Another Grendel in the mix.The rifle has a 6.5 Grendel upper. Less than 300 rounds through it - probably closer to 200 rounds.
I don't think any repairs are necessary, just that it was weird enough to share.
As for the brass.... That's once fired. Nothing a trip through the sizer die and trimmer won't fix!!