Toecutter
.308 Win
Could someone of taken a 357 barrel and cylinder and put them in a model 18 frame ?
What is it?
- Thread starter MilesTeg
- Start date
Greywolf224
6.5 Creedmoor
As @Phauxtoe stated, Gently (dont mar them) take the grips off when you can and check the frame under the grips for the model number stamping.
Greywolf224
6.5 Creedmoor
I believe the 18 frame was made for .22 only. If so, that would be one hell of a show when you pull the trigger. Not sure the frame could handle it.
Toecutter
.308 Win
Yes it wouldn't be safe unless you knew that smith used the same steel in the frames. If the frame does indeed say 18 and the barrel 357 it may not be safe. We already may suspect the front sight isn't correct, was there other modifications.
You guys are killing me. Your making me want to drive there after work one night and dig into this thing.
Greywolf224
6.5 Creedmoor
Toecutter
.308 Win
I found this it will at least tell you the year should be 68-76
K Series K Frames (Adjustable Sight Models)
K101 – K614……………......1946
K615 – K18,731…………....1947
K18,732 – K73,121……..…1948
K73,122 – K84,149……..…1949
K84,150 – K104,047…...1950
K104,048 – K136,690...1951
K136,691 – K175,637...1952
K175,638 – K210,095...1953
K210,096 – K231,255...1954
K231,256 – K266,154...1955
K266,155 – K288,988...1956
K288,989 – K317,822...1957
K317,823 – K350,547...1958
K350,548 – K386,804...1959
K386,805 – K429,894...1960
K429,895 – K468,098...1961
K468,099 – K515,478...1962
K515,479 – K553,999....1963
K555,000 – K605.877....1964
K605,878 – K658.986....1965
K658,987 – K715,996....1966
K715,997 – K779.162....1967
K779,163 – K848,781....1968
K848,782 – K946,391....1969
K946,382 – K999,999....1970
1K1 – 1K39,500.........1970
2K1 – 2K22.037.........1970
1K39,501 – 1K999,999...1971
2K22,038 – 2K55,996....1971
3K1 – 3K73,962.........1971
2K55,997 – 2K99,999....1972
3K31,280 – 5K6,616.....1972
4K1 – 4K1,627..........1972
4K1,628 – 4K54,104.....1973
5K6,617 – 5K73,962.....1973
4K54,105 – 4K99,999....1974
5K73,963 – 6K58,917....1974
7K1 – 7K26,043.........1974
7K26,044 – 7K70,577....1975
6K98,918 – 8K20,763....1975
8K20,764 – 9K1.........1975
8K20,000 – 9K100,000...1975
9K1,001 – 9K99,999.....1976
10K001 – 24K9,999......1977
25K001 – 56K9,999......1978 – 79
57K001 – 91K6,800......1980
91K6,801 – 124K000.....1981
125K000 – 269K9,999....1982
270K000 – 311K273......1983
K Series K Frames (Adjustable Sight Models)
K101 – K614……………......1946
K615 – K18,731…………....1947
K18,732 – K73,121……..…1948
K73,122 – K84,149……..…1949
K84,150 – K104,047…...1950
K104,048 – K136,690...1951
K136,691 – K175,637...1952
K175,638 – K210,095...1953
K210,096 – K231,255...1954
K231,256 – K266,154...1955
K266,155 – K288,988...1956
K288,989 – K317,822...1957
K317,823 – K350,547...1958
K350,548 – K386,804...1959
K386,805 – K429,894...1960
K429,895 – K468,098...1961
K468,099 – K515,478...1962
K515,479 – K553,999....1963
K555,000 – K605.877....1964
K605,878 – K658.986....1965
K658,987 – K715,996....1966
K715,997 – K779.162....1967
K779,163 – K848,781....1968
K848,782 – K946,391....1969
K946,382 – K999,999....1970
1K1 – 1K39,500.........1970
2K1 – 2K22.037.........1970
1K39,501 – 1K999,999...1971
2K22,038 – 2K55,996....1971
3K1 – 3K73,962.........1971
2K55,997 – 2K99,999....1972
3K31,280 – 5K6,616.....1972
4K1 – 4K1,627..........1972
4K1,628 – 4K54,104.....1973
5K6,617 – 5K73,962.....1973
4K54,105 – 4K99,999....1974
5K73,963 – 6K58,917....1974
7K1 – 7K26,043.........1974
7K26,044 – 7K70,577....1975
6K98,918 – 8K20,763....1975
8K20,764 – 9K1.........1975
8K20,000 – 9K100,000...1975
9K1,001 – 9K99,999.....1976
10K001 – 24K9,999......1977
25K001 – 56K9,999......1978 – 79
57K001 – 91K6,800......1980
91K6,801 – 124K000.....1981
125K000 – 269K9,999....1982
270K000 – 311K273......1983
Greywolf224
6.5 Creedmoor
Where did you get the s/n break down. I went looking a few weeks back for another handgun and could not find it for the smiths.
Toecutter
.308 Win
Found it on another forum
How to Identify/Date a S&W
How to Identify/Date a S&W
RandallOfLegend
.40 S&W
Maybe it's a model 28, with a weakly stamped 2. Or maybe the 2 is overstruck on the 1.
I know I promised these picture a long time ago but I finally got to it. On a good note thanks to everyone's help in this thread I successfully found a holster for the gun. I helped my father adjust it today and he really liked it. Hopefully this means he will shoot it more often. Sorry about the picture quality my phone didn't want to take good pictures.
S&W Fan
.475 A&M Magnum
That's a model 19-3. Go to smith-wessonforums.com, click on the sub forum Revolvers - 1980 to present. Ask for what ever info. You are looking for based on the serial number of that revolver.
You will / should get a reply shortly after with all the info. You want / need. Or if you like, send me a private message with the serial number and I'll look it up for you. I just received the latest catalog of current info. On All S&W firearms.
You will / should get a reply shortly after with all the info. You want / need. Or if you like, send me a private message with the serial number and I'll look it up for you. I just received the latest catalog of current info. On All S&W firearms.
S&W Fan
.475 A&M Magnum
I posted the wrong sub forum to go to at the Smith-Wessonforum.com site. That revolver was produced in 1967 so the correct sub forum would be revolvers- 1961-1980
S&W Fan
.475 A&M Magnum
The dash number is just a notification of a modification or revision to a current production model. In your case the -3 indicates the relocation of the rear sight leaf screw.
All very interesting. I didn't grab the serial number when I was there. I'll try to remember next time I'm there.