Concrete repair

cgrutt

cgrutt

.338 Win Mag
NYGF Vendor
Monthly Donor
Messages
8,998
Reaction score
17,050
Location
Interwebz
Repaired a concrete curb this am...

Used to have ramp around back of house for former disabled owner...

20200716_092616.jpg

Pinned some rebar to old concrete to add some strength...

20200716_105607.jpg

Brushed on slurry of sand mix and latex additive to strengthen bond to old concrete...

20200716_110537.jpg

Lined forms with plastic to aid releasing...

20200716_112751.jpg

Filled with high strength concrete mix and screed top...

20200716_130323.jpg

Will see how it turned out tomorrow am....
 
Last edited:
Blimey

Blimey

.450/400 Nitro Ex
Messages
11,284
Reaction score
16,257
Location
Western NY
cgrutt said:
Took forms off came out ok there were some small pockets along bottom filled them in with sand mix so color looks a little off in pic should be fine when it dries.

View attachment 79704
Click to expand...
its tough to fill those pockets in while pouring I think unless the mix is pretty liquid or You have a vibrator. Looks a lot more uniform than when I did it last with a form like that.
 
cgrutt

cgrutt

.338 Win Mag
NYGF Vendor
Monthly Donor
Messages
8,998
Reaction score
17,050
Location
Interwebz
Blimey said:
its tough to fill those pockets in while pouring I think unless the mix is pretty liquid or You have a vibrator. Looks a lot more uniform than when I did it last with a form like that.
Click to expand...

Yeah I was stirring up as best I could with shovel but was concentrating in center in between the rebar because I didn't want to tear plastic sheeting. I think the rebar actually contributed to pockets they're small about 1/4" at best. Just esthetics really.

Funny story my nephew was working for contractor years ago. They poured a foundation and nephew was poking around with vibrator and one of the walls blew out. They lost a whole truck load of concrete down a hill in back of building. He said he was digging it out for weeks with a Bobcat lol.
 
Blimey

Blimey

.450/400 Nitro Ex
Messages
11,284
Reaction score
16,257
Location
Western NY
cgrutt said:
Yeah I was stirring up as best I could with shovel but was concentrating in center in between the rebar because I didn't want to tear plastic sheeting. I think the rebar actually contributed to pockets they're small about 1/4" at best. Just esthetics really.

Funny story my nephew was working for contractor years ago. They poured a foundation and nephew was poking around with vibrator and one of the walls blew out. They lost a whole truck load of concrete down a hill in back of building. He said he was digging it out for weeks with a Bobcat lol.
Click to expand...
Perhaps another reason 90% of the homes in new york seem to still be built with block :)
 
Saltwater60

Saltwater60

20×102mm Vulcan
Messages
37,252
Reaction score
41,576
Location
Western NY
Fill the holes with caulking and be done with it. It won’t be perfect anyways because the concrete will be different colors. Tis life.
 
cgrutt

cgrutt

.338 Win Mag
NYGF Vendor
Monthly Donor
Messages
8,998
Reaction score
17,050
Location
Interwebz
kev74 said:
Any voids I see match the original concrete pretty well.

Just tell anyone who asks you did it that way on purpose.
Click to expand...

Bought a bag of sand mix and few bags of high strength concrete mix from the start. Used the sand mix to create slurry to help bond repair to old concrete then mixed in about 80% of bag with the concrete to blend it in. Kept about 10% of bag because I expected to have to fill in some small pockets been through this before lol. Will be back next week for another project pretty sure color will match after it had some time to dry and cure. It's literally same mix as the repair.
 
You must log in or register to reply here.
Top