DET is leaving New York....

D

DET

22lr
Messages
17
Reaction score
14
Location
NY
and needs his epoxied bullet button removed. What should DET do? DET was thinking of prying it off or removing the top and clipping it from the inside.
 
GUNSICK

GUNSICK

6.5 Creedmoor
Messages
1,851
Reaction score
3,679
Location
The Flipside
You can't get at it from inside. Drill or grind the bolt off on the mag catch side not the button.

Let me guess, moving to Hollywood to work with Spielberg on his next big film? Remake of Cocktail and you play Tom Cruises part?

Just joking, I m sure your moving because of a chick. You gotta stop putting it on a pedestal.
 
togmaster

togmaster

.450/400 Nitro Ex
Messages
13,373
Reaction score
20,235
Location
Buoy 42
Guess you didn't put wax in the screw before you epoxied it. I would try drilling it out with the same diameter bit as the screw.

Pew pew.
 
  • Like
Reactions: DET
Robin

Robin

.577 Tyrannosaur.
Messages
20,655
Reaction score
44,798
Location
Livingston County
Soak it in a coffee can filled with acetone. the epoxy will dissolve. Damn DET you have been largely silent, hope everything is jake. Get a job with Pew Research Center?
Robin
 
D

DET

22lr
Messages
17
Reaction score
14
Location
NY
PEW PEW PEW reload without opening the AR PEW PEW PEW some more.
 
Last edited:
Doc8404

Doc8404

.450/400 Nitro Ex
Messages
13,669
Reaction score
24,355
Location
Oneida County NY
DET said:
DET is happy to be back. DET took a screw driver and scraped out the epoxy area of the bullet button.

The magazine catch/release is loose and has a hard time catching it. As long as I hold the catch side in or rotate the rifle on the side it works. DET might cut the release on the other side of the button.

PEW PEW PEW reload without opening the AR PEW PEW PEW some more.
Click to expand...

Det better not be in Ny still.
 
  • Like
Reactions: DET
D

DET

22lr
Messages
17
Reaction score
14
Location
NY
Help DET, he doesn't want to be embarrassed and show up in PA with a fixed magazine AR.
 
Last edited:
D

DET

22lr
Messages
17
Reaction score
14
Location
NY
GUNSICK said:
You can't get at it from inside. Drill or grind the bolt off on the mag catch side not the button.

Let me guess, moving to Hollywood to work with Spielberg on his next big film? Remake of Cocktail and you play Tom Cruises part?

Just joking, I m sure your moving because of a chick. You gotta stop putting it on a pedestal.
Click to expand...

Correct DET met a very good looking girl and is moving into her parents house. Pictures to come.

The majority of DETS firearms fled percicution and became refugees in PA. DET has to work on his fixed magazine isue and add a new gas block and tune (which will be done in PA) and all of DETs babies will be rehabilitated.
 
FrankenCub

FrankenCub

.338 Win Mag
Messages
7,033
Reaction score
8,760
Location
Broome Co, NY
When you get to Pa, push that end toward the other side. Grab other side with visegrips and twist till it snaps. Won't take much. Then replace the whole mag release.
 
You must log in or register to reply here.
Top