Fake Muzzle Brake or Flash hider...ideas?
- Thread starter turbobike
- Start date
Marine Cpl
.577 Tyrannosaur.
If your barrel is 16 inches, I'd recommend a plain barrel cap so that you don't have any unnecessary weight and length for no benefit.
Unless of course your building for looks.
Barrel Cap (plain) for 5/8-24 | Thordsen Customs
Unless of course your building for looks.
Barrel Cap (plain) for 5/8-24 | Thordsen Customs
meketrefe
.450/400 Nitro Ex
@turbobike what is exactly a fake muzzle brake? What do you have in mind? Any examples?
meketrefe
.450/400 Nitro Ex
oh ok. I don't know,they do not serve any useful purpose and if you have to service the barrel
then you are in trouble. I would personally choose a sleeve that the gas block can slide over.
Clamp are ideal for this even if the od is a tad over the .750. Steel better.
Or otherwise get a 2 part gas block but they are bulky and heavier.
then you are in trouble. I would personally choose a sleeve that the gas block can slide over.
Clamp are ideal for this even if the od is a tad over the .750. Steel better.
Or otherwise get a 2 part gas block but they are bulky and heavier.
meketrefe
.450/400 Nitro Ex
IMO I don't think this is a problem. It might call attention but at the same time it is what it is.
Device is a bit arbitrary anyway plus there is nothing in the law written about fake compensators or fake muzzle brakes.
I think device would be something that serves a purpose and a fake anything serves no purpose other than perhaps covering permanently
the threads if pinned.
Marine Cpl
.577 Tyrannosaur.
I think he means those fake birdcage flash suppressors or compensator that have no
If it isn't a flash suppressor, muzzle brake, compensator, or silencer, it is legal as long as it is pinned and welded.
The fake ones are none of the above.
meketrefe
.450/400 Nitro Ex
Pinned and welded? why welded? It is extra work and it doesn't make a difference nor anybody is asking for it.
Marine Cpl
.577 Tyrannosaur.
I actually don't know the procedure but every AR I've bought from a factory and not built had a muzzle brake pinned and spot welded over the pin.
meketrefe
.450/400 Nitro Ex
Not RRA, STAG, ATI and many others. The sold hundreds of them with just a pin. All the major retailers too. LGS's that I know too.
Those were sold as permanent method under the previous ban and the current ban doesn't mention that the permanently attached devices
under the previous ban are less permanent today than what they were before. I think this might have started after some of the older federal ban requirements
or from shorter barrel compliance but nothing to do with NY.
In fact this question came up during the NYSP education sessions and they said pins only should be ok as they were before.
alistair
6.5 Creedmoor
Anyone install one of these on their featureless AR
Fake Flash Hiders | Muzzle Devices by Tacticool22
Fake Flash Hiders | Muzzle Devices by Tacticool22
Robin
.577 Tyrannosaur.
Turbo, is it a fixed magazine? If so it doesn't need to be pinned and welded. Right?
Robin
Robin
Exonautic
.308 Win
don't see the benefit over a plain cap like was mentioned earleir in this thread. Truthfully i think it's ridiculous unless you need to meet a length requirement.
and speaking of earlier in this thread, robin this is over 2 years old.
Bustedknees
12-gauge slug (smooth bore)
that's how the AK-47's were after Bill Clintons assault weapons ban.. thread cap n spot weld..
Robin
.577 Tyrannosaur.
Gee, I wonder what he did?
Robin
Why the F would you put one of these on a crowned barrel ?
We’ll I said FUAC it and built a standard free-state AR-15...but sadly it fell off my canoe and into Oatka Creek..
Exonautic
.308 Win
Atta boy!We’ll I said FUAC it and built a standard free-state AR-15...but sadly it fell off my canoe and into Oatka Creek..
We’ll I said FUAC it and built a standard free-state AR-15...but sadly it fell off my canoe and into Oatka Creek..
Do you have the GPS coordinates?..... you know, so I can avoid the rough waters.
Robin
.577 Tyrannosaur.
Maybe I'll find it this spring Turbo. A midge ought to do, or possibly a FUAC imitation would work, a simple worm.We’ll I said FUAC it and built a standard free-state AR-15...but sadly it fell off my canoe and into Oatka Creek..
Robin