4excal
.338 Win Mag
I'm a pauper
Let's see your reloading room! (Pics only please!)
- Thread starter mosquito
- Start date
Deplorable Me
.700 Nitro Express
Thought it was a gender reassignment photo at first.
Deplorable Me
.700 Nitro Express
The reloading shop isn't finished til the half naked wimmins with guns calender goes up.
Let's get this thread going again, I like seeing everyone's setup.
HighlandLofts
6.5 Creedmoor
I have to straighten my stuff up before I take a picture of it to post, I want to add a shelf for the bullets and get things a little more organized.
HighlandLofts
6.5 Creedmoor
Still some stuff to get set up, But at least it's usable. I have a Hornady electronic powder measurer, a Frankfurt Arsenal Stainless Steel Tumbler, a Hornady Sonic Cleaner that I have to open up and get set up. I think there is 22 pounds of powder there.I like them clear plastic storage containers for holding the brass, they stack really nice and holds a bunch of brass.
I have two electric outlets under, on each side of the reloading surface. I still have to plumb it in to the wireing in the wall. On the left side in the outlet box is a switch for the florecent light under the top shelf.
Once I go through the guns I have and get them under control I'll have more room in this walk in closet.
The first press is the Hornady Lock & Load Classic, the other one is an older Pacific press. I bought a pack of pegboard hooks from Lowes and some extra peg board hooks & baskets to hang stuff on.
I bought a bunch of the lock & load adapters for most of the dies I have, I still need to pick up more of them got three sets of dies I just bought.
The plastic bucket below with the black plastic pan sitting in is a Safeway brand ice cream bucket, they are also nice for brass storage, I have about half a dozen of them. I bought a label machine from walmart to post what's inside of things, i like them better then hand written labels on tape.
I have two electric outlets under, on each side of the reloading surface. I still have to plumb it in to the wireing in the wall. On the left side in the outlet box is a switch for the florecent light under the top shelf.
Once I go through the guns I have and get them under control I'll have more room in this walk in closet.
The first press is the Hornady Lock & Load Classic, the other one is an older Pacific press. I bought a pack of pegboard hooks from Lowes and some extra peg board hooks & baskets to hang stuff on.
I bought a bunch of the lock & load adapters for most of the dies I have, I still need to pick up more of them got three sets of dies I just bought.
The plastic bucket below with the black plastic pan sitting in is a Safeway brand ice cream bucket, they are also nice for brass storage, I have about half a dozen of them. I bought a label machine from walmart to post what's inside of things, i like them better then hand written labels on tape.
it looks a little mess but it really not.
HighlandLofts
6.5 Creedmoor
It's not a mess, it's used. That's the important thing. It's amazing how fast the money adds up on all of the goodies needed
kev74
20×102mm Vulcan
This is the cleanest my bench has been since I moved. I just cleaned it off so I wouldn't embarrass myself.
HighlandLofts
6.5 Creedmoor
I like the bottle opener on the right side of your bench. It's nice to see what you guys have set up, it never gets boring looking at this thread.
kev74
20×102mm Vulcan
Its been referred to as the longneck decapper.
HighlandLofts
6.5 Creedmoor
I haven't used Glass bottles in decades, I like the Bud Cans.
Tonight feels like it might be one of them nights, I need to catalog my guns. Some Buds might be enjoyable in the process. I need to stock up another 18 pack, I only have around 10 in the fridge.
Tonight feels like it might be one of them nights, I need to catalog my guns. Some Buds might be enjoyable in the process. I need to stock up another 18 pack, I only have around 10 in the fridge.
HighlandLofts
6.5 Creedmoor
The hardest part of getting it done is getting it started.
kev74
20×102mm Vulcan
It looks like the Lee's are multiplying! I had another that I bought a few years back and finally got around to mounting it.
Now I've got dedicated presses for 9mm, 45acp and 38spl, then the single stage for rifle and oddball tasks. Woo-hoo!
I've got a Rockchucker sitting on a shelf that needs to get squished in, but I'm not sure where.
Now I've got dedicated presses for 9mm, 45acp and 38spl, then the single stage for rifle and oddball tasks. Woo-hoo!
I've got a Rockchucker sitting on a shelf that needs to get squished in, but I'm not sure where.
dwa12479
.338 Win Mag
Sounds like it's time for a bigger bench.
HighlandLofts
6.5 Creedmoor
My thoughts exactly, new bench time.
I will say the best thing I did was that board I used on top so easy to clean
This is mine, kind of a work in progress, making some Tikka food in 8mm mauser
speedkills27
6.5 Creedmoor
Im still in the planning stages of mine. Other than a basement wall and some napkins with doodles theres nothing to show. I will keep everyone updated through out winter as I move along
kev74
20×102mm Vulcan
Its too clean. You need a few piles of crap on there.
LOL, that's what I thought too, I have clutter off to the right and left out of the picture, but I like to work in minimal clutter as I'm just learning and going slow
kev74
20×102mm Vulcan
Uh oh! My bench grew a Rockchucker and another powder measure.
Things are getting tight!
Things are getting tight!
Funny mine just grew a Redding Boss but I may need to expand or remount presses as the work area has become too crowded
I can't wait to build my new bench.
HighlandLofts
6.5 Creedmoor
Build it BIGGER than you need, you will use the extra space down the road.
And a shelf under the reloading bench and an over head shelf are a good thing to have as well as peg board hung up on the wall. I bought the assortment of peg board hangers from Lowe's and a few individual peg board hanger that I found usefull.
I'm like to get a small dorm refrigerator for my gun room.
And a shelf under the reloading bench and an over head shelf are a good thing to have as well as peg board hung up on the wall. I bought the assortment of peg board hangers from Lowe's and a few individual peg board hanger that I found usefull.
I'm like to get a small dorm refrigerator for my gun room.
Oh I have big plans for it. The plan is 3+ stations. One for single stage one for Dillon 650 and one for shotgun. Then I plan on making a shelving system off to the side to better store the brass and heavy components.
Topper!
Russ Woody
.45 acp
Kitchen table reloading bench. I have a crutch under the press when I am actually using it. I would put it in my woodshop but its too friggin' messy all the time and the wife actually likes me hanging out and reloading. She's a keeper.
Russ P