Need recommendation for a cheek riser

mgunner

mgunner

.45 acp
Messages
407
Reaction score
483
Location
United States
I'm looking for recommendations for an adjustable cheek riser for a 22-250 with a wooden stock and a scope (and a compass in the stock and this thing that tells time.:p) I never had to buy one before so I would appreciate any insight you may have.

Since its a vintage rifle, I don't want something that will require drilling or gluing something to the stock.
 
Tisto

Tisto

.308 Win
Messages
3,513
Reaction score
5,890
Location
Tonawanda
kev74 said:
I've been tempted to use this stuff with some foam sheet, but never got around to it.

View attachment 224616
Click to expand...
^^^ this.

First thing that comes to mind is, Do you need a higher comb, or do you need shorter rings ? Most stocks are pretty well set so that your eye aligns with a properly mounted scope. Not always, but most of the time. Maybe you're part horse and have a long face or maybe you're a dwarf and have a tiny head. In those cases, some type of adaptation is called for.

As Kev74 suggests, some of that self adhering bandage would work nicely. If you wanted a harder surface than foam would create, wrap the stock with one layer of the bandage, then cut the plastic container from some Nestle Quick and wrap that in place. It's a perfect shape for the comb.
 
Jezman

Jezman

.308 Win
Messages
2,977
Reaction score
3,925
Location
12550
Do you have any experience with this type of riser? Yes I use it on my .308 works just fine
 
mgunner

mgunner

.45 acp
Messages
407
Reaction score
483
Location
United States
Tisto said:
^^^ this.

First thing that comes to mind is, Do you need a higher comb, or do you need shorter rings ? Most stocks are pretty well set so that your eye aligns with a properly mounted scope. Not always, but most of the time. Maybe you're part horse and have a long face or maybe you're a dwarf and have a tiny head. In those cases, some type of adaptation is called for.

As Kev74 suggests, some of that self adhering bandage would work nicely. If you wanted a harder surface than foam would create, wrap the stock with one layer of the bandage, then cut the plastic container from some Nestle Quick and wrap that in place. It's a perfect shape for the comb.
Click to expand...
Lol, no not a dwarf or a horse head :). I thought that the rings may be the issue but I'll only know for sure if I take it to a gun store to get an opinion as to what the best setup would be. Since there isn't a store near me, I'll have to wait until I have the time to go to one. I didn't want to order rings online only to find they were the wrong size for me. Plus that means removing the scope, reataching, etc. It would just be easier right now to get a riser so I can take the rifle to the range and enjoy using it sooner rather than later.
 
GTN

GTN

.308 Win
Messages
3,406
Reaction score
4,805
Location
Livingston County
mgunner said:
I'm looking for recommendations for an adjustable cheek riser for a 22-250 with a wooden stock and a scope (and a compass in the stock and this thing that tells time.:p) I never had to buy one before so I would appreciate any insight you may have.

Since its a vintage rifle, I don't want something that will require drilling or gluing something to the stock.
Click to expand...
A photo might help us
 
diggs223

diggs223

.357 mag
Messages
694
Reaction score
1,599
Location
NY
if your looking for a cheek "riser" meaning the scope is to high. the only change to make is to lower rings, but only if there is enough clearance
between scope and reciever.
 
kev74

kev74

20×102mm Vulcan
Messages
48,367
Reaction score
152,152
Location
Orange Co.
mgunner

mgunner

.45 acp
Messages
407
Reaction score
483
Location
United States
diggs223 said:
if your looking for a cheek "riser" meaning the scope is to high. the only change to make is to lower rings, but only if there is enough clearance
between scope and reciever.
Click to expand...
I don't know if I can get rings lower than this. See images that I just posted and let me know what you think.
 
Tisto

Tisto

.308 Win
Messages
3,513
Reaction score
5,890
Location
Tonawanda
GTN

GTN

.308 Win
Messages
3,406
Reaction score
4,805
Location
Livingston County
Sorry that I don’t know. I’ve only mounted 2 scopes correctly. My 308 I got lucky on the first try picking the size. 2nd I failed on first choice. I used this trick to get it right on the 2nd try
But you will have to remove scope and rings to do it
 
diggs223

diggs223

.357 mag
Messages
694
Reaction score
1,599
Location
NY
mgunner said:
Looking at the pics, can you tell if I would be able to get lower rings? I'm not sure what size are on this rifle now.
Click to expand...
From what I see rings look like the lowest you can get. So your options are the add on riser or a different stock as mentioned, probably what I would do.
 
kev74

kev74

20×102mm Vulcan
Messages
48,367
Reaction score
152,152
Location
Orange Co.
It looks like your scope is as low as it can go.

Your options would be either cheek riser, or a scope with smaller bell on the front.
 
mgunner

mgunner

.45 acp
Messages
407
Reaction score
483
Location
United States
kev74 said:
It looks like your scope is as low as it can go.

Your options would be either cheek riser, or a scope with smaller bell on the front.
Click to expand...
Thank you. Saves a trip to the gun store to see about the rings. I'm going to go with a cheek riser.
 
You must log in or register to reply here.
Top