sling swivel stud

O

oc shooter

.223 Rem
Messages
1,278
Reaction score
840
Location
Orange County ny
dose anyone know if I can move the swivel studs on a synthetic Remington 700 stock from the bottom to the side. I hunt in really steep terrain and i'd like to carry it like an M4 instead of upside down on my shoulder that way i have both hands to grab onto tree's as i'm climbing
 
kev74

kev74

20×102mm Vulcan
Messages
45,760
Reaction score
144,390
Location
Orange Co.
They probably have the stud screwed into a part that has been reinforced to receive it.

If you hit a hollow part where you want to install the new stud, you'd have to find a way to reinforce that area. Maybe an epoxy fill?
 
Chevusa

Chevusa

.338 Win Mag
Messages
6,718
Reaction score
7,644
Location
Erie
oc shooter said:
Hmm get a new stock and move on with my life helluva answer that thinking maybe a boot for the but but the barrel end becomes a challenge
Click to expand...
Yea why bother buying the right thing when you can rig up some nonsense instead I’m sure it’ll work just as well. :rolleyes:
 
Steve H

Steve H

.40 S&W
Messages
108
Reaction score
229
Location
Albany county
Have you taken it apart and looked? I had one and it was mostly hollow inside. You may be able to use a couple of machine screw type studs secured with nuts and washers on the inside.
 
Chevusa

Chevusa

.338 Win Mag
Messages
6,718
Reaction score
7,644
Location
Erie
kev74 said:
Why not experiment with the old one and learn something... and maybe not have to buy the new stock?
Click to expand...
Because my guns are self defense guns and I don't tinker with them trying to rig up shit the same way Jeff Gordon wouldn't rig up some car to win a race. (I don't follow Nascar so insert another name) Buy the right thing for the right job unless the purpose for the gun is just some fuck around toy. I'll pay the $80 and have the real thing.
 
kev74

kev74

20×102mm Vulcan
Messages
45,760
Reaction score
144,390
Location
Orange Co.
Chevusa said:
Because my guns are self defense guns and I don't tinker with them trying to rig up shit the same way Jeff Gordon wouldn't rig up some car to win a race. (I don't follow Nascar so insert another name) Buy the right thing for the right job unless the purpose for the gun is just some fuck around toy. I'll pay the $80 and have the real thing.
Click to expand...
I've got self defense guns and toys.

The serious stuff doesn't get messed with. The toys on the other hand, I have no problem tearing into - with the full knowledge that if I mess up, its going to cost some $$ to make it right again. As a result, i can do a trigger job on a 10/22 or Mini 14 that I'd put up against anyone else's work and serviceable trigger work on most anything else. I've made parts for guns from metal stock, and made a receiver from scrap plumbing parts and old bullet cases.

If you don't try, you don't learn. Its a nice feeling you get when you can take a piece of junk or scrap and make it do what you want it to do.

Just for fun, look at some of the stuff some of the pro shooters do to their guns. They seem to run pretty well.
 
Acer-m14

Acer-m14

.950 JDJ
Messages
34,784
Reaction score
36,691
Location
Livingston
pull the butt plate off and look inside .. add some epoxy and build up the area if needed .. ..

my 223 savage syn stock is full of fiberglass bondo now .. and the voids in the forearm is filled with #9 shot and epoxy to offset the weight ..

i hated that hollow sound noise if a tree branch hit it .. and i wanted a bit more weight on it anyways ..
 
pramaglia

pramaglia

.357 mag
Messages
607
Reaction score
2,340
Location
NY
Not sure if this would work for you, but I bought an Alps day pack that allows me to attach my rifle to the pack.
 

Attachments

  • f843d9f708eb8fa7f4899e84291f60ee.jpg
    f843d9f708eb8fa7f4899e84291f60ee.jpg
    31.8 KB · Views: 4
MillidotShooter

MillidotShooter

.40 S&W
LEO / LEA
U.S. Military
Messages
196
Reaction score
297
Location
Pennsylvania
Magpul makes a stock that has Mlok Side slots for attaching an Mlok Stud at the barrel and a sidebar on the butt for attaching the sling. It is what I used to build my 700 .308 SPS Sniper Rifle. It's called the Magpul Hunter. There is also a kit you can get that replaces the lower plate and makes it a magazine feed. Worth the money.

Annotation 2020-08-16 072631.jpg
 
Chevusa

Chevusa

.338 Win Mag
Messages
6,718
Reaction score
7,644
Location
Erie
MillidotShooter said:
Magpul makes a stock that has Mlok Side slots for attaching an Mlok Stud at the barrel and a sidebar on the butt for attaching the sling. It is what I used to build my 700 .308 SPS Sniper Rifle. It's called the Magpul Hunter. There is also a kit you can get that replaces the lower plate and makes it a magazine feed. Worth the money.

View attachment 83075
Click to expand...
Sounds like he wants to spend zero dollars and zero cents. Maybe he can make something out of duct tape.
 
MillidotShooter

MillidotShooter

.40 S&W
LEO / LEA
U.S. Military
Messages
196
Reaction score
297
Location
Pennsylvania
Chevusa said:
Sounds like he wants to spend zero dollars and zero cents. Maybe he can make something out of duct tape.
Click to expand...
Yeah... But it is still good to have options. Never really saw the point in jerry-rigging something firearm related. Rather just do it right and be done. Least I know it won't fall apart and is going to function properly.
 
Chevusa

Chevusa

.338 Win Mag
Messages
6,718
Reaction score
7,644
Location
Erie
tony said:
Perhaps he doesn’t have the extra money you do. Many products have origins developed by a tinkerer. If you don’t have a useful answer to his question maybe you shouldn’t respond...
Click to expand...
That’s where you’re wrong. Unless it’s a range toy the most useful answer is to buy the right thing for what you’re trying to do. Life saving devices is not where you skimp on spending $60.
 
BDinPutnam

BDinPutnam

.475 A&M Magnum
Messages
14,492
Reaction score
20,850
Location
Someplace else
nortatoga said:
A few options?

View attachment 83095

View attachment 83097

View attachment 83098
Click to expand...

That last one is what I had in mind but I couldn't recall what its called.

I used to have one on a Weatherby Mk IV 30-06, it was very handy. Gave it to my wife's nephew as he does a lot of mountain hunting out west, and my Weatherby has been relegated to bench shooting ever since I switched my deer hunting to NY (shotgun only here) from still and stand hunting in Michigan.
 
nortatoga

nortatoga

.338 Win Mag
Monthly Donor
Messages
8,164
Reaction score
18,233
Location
Saratoga County
BDinPutnam said:
That last one is what I had in mind but I couldn't recall what its called.

I used to have one on a Weatherby Mk IV 30-06, it was very handy. Gave it to my wife's nephew as he does a lot of mountain hunting out west, and my Weatherby has been relegated to bench shooting ever since I switched my deer hunting to NY (shotgun only here) from still and stand hunting in Michigan.
Click to expand...


I think they are mainly use with shotguns but it sould work with a 700 also!
 
O

oc shooter

.223 Rem
Messages
1,278
Reaction score
840
Location
Orange County ny
well a few ideas lets not turn this into something it was never meant to be while I'm far from wealthy a new heavier stock would be counter intuitive I'm a 70+ year old hunting in the slide mt. area of the catskills it's tough going for a younger man and getting worse for me every year I don't understand how we started talking about tactical weapons or saving my life when in the opening post I specifically stated that I hunt in a steep area. thanks to all for a couple of ideas
 
You must log in or register to reply here.
Top