Vapor
.308 Win
Starting a "What did you Get today" thread. Let's give it a try (dont forget pics)
- Thread starter Edwardteach72
- Start date
PutnamCharlie
6.5 Creedmoor
A couple of parts for the next one.
Vapor
.308 Win
Rounding out some edc with a new pen.
I’ll take “When well known manufacturers use the wrong products and procedures to manufacture their firearms for $200 Alex.” You don’t use Cosmoline to assemble a damn rifle. This isn’t Mother Russia!
kev74
20×102mm Vulcan
Who made it?I’ll take “When well known manufacturers use the wrong products and procedures to manufacture their firearms for $200 Alex.” You don’t use Cosmoline to assemble a damn rifle. This isn’t Mother Russia!
View attachment 109742
It looks like cooked oil. At least the nut didn't gall.
Not to mention when customers gUnSmiF their own stuff and Bubba it all up! Using a Magpul MOE picatinny adapter through the M4 style handguard which had to be “installed” by taking the handguard off and almost snapping the plastic index pins that the heat shield indexes into. Also because of these giant MOE washers the heat shield wasn’t even indexed through the pins since they created too thick of a gap, causing the heat shield to sit crooked and push up against the barrel and rattle around. But I digress...this is what I’m here for. lolI’ll take “When well known manufacturers use the wrong products and procedures to manufacture their firearms for $200 Alex.” You don’t use Cosmoline to assemble a damn rifle. This isn’t Mother Russia!
View attachment 109742
View attachment trim.7EF29F41-0424-4DB0-A4BF-B84E33B722E7.MOV
Rhymes with Mindham Meaponry! It’s pretty sticky. I’ve actually seen this on a decent amount of rifles that I’ve redone before. Lots of companies are too lazy to clean anything before assembly, they get their barrels, upper/lower parts kits in a bath of rust preventative and never remove it. They just install it as is. So annoying and a poor practice.
kev74
20×102mm Vulcan
Can you blame them? A jar of anti-seize is like $10!
Can you blame them? A jar of anti-seize is like $10!
And that's buying it retail.. imagine how expensive it is per unit buying it in bulk... like $7
nortatoga
.338 Win Mag
Order the last upgrade part for my Ruger American Ranch Rifle an adjustable cheek rest from Home Page - Matthew's Fabrication - Matthew's Fabrication
Matthew's makes some decent stuff. I bought a knife sheath from him that I posted earlier in this thread.
Starting a "What did you Get today" thread. Let's give it a try (dont forget pics)
Now where did you find that? That was quick Blue Collar Reloading. They sent me an email warning of possible delays and SHAZAM, they're delivered. Impressive even by pre hoarding / general madness standards.
nygunforum.com
Once again...
Not gun related...
Not gun related...
I was a bad boy today. In my defense I was unsupervised at the gun store.
ARCHIVE: Model 625 JM | Smith & Wesson
No longer in current production, content is subject to change and is provided here for reference purposes only.Jerry Miculek knows a little about ultra-fast performance. His record 12 shots, two loads of six with a reload in between, in under three seconds set the standard for speed shooting...www.smith-wesson.com
I’ve got two of thoseI like those!
see next post
Last edited:
Let me get them Dino Nuggies tho!
ikilledkenny
.45 acp
bought a slightly used King of the Mountain hunting jacket online for 38$ including shipping. i think the seller doesnt know the value of it.
At $38 shipped I’ll guarantee the seller had no clue of its real value. Excellent score! That’s all that I wear for a hunting jacket when the archery season turns cooler.
My second build is complete.... budget all the way.... Will replace the grip with a MOE+ Grip, got the stock for free. Have the parts to pin the mag, will get that in right away!
Built this to learn. Did the upper totally too.... Headspace checks out okay. Have a decent quality BCG in it.... $80 Barrel from PA. ZRO Delta Upper w/ AP Dust cover & FA. . Matrix Arms handguard. Magpul sights. Anderson SS LPT. Anderson Buffer assembly. Raw Anderson Lower buffed out. Will CAMO the entire thing someday, for now I like the silver & black
Built this to learn. Did the upper totally too.... Headspace checks out okay. Have a decent quality BCG in it.... $80 Barrel from PA. ZRO Delta Upper w/ AP Dust cover & FA. . Matrix Arms handguard. Magpul sights. Anderson SS LPT. Anderson Buffer assembly. Raw Anderson Lower buffed out. Will CAMO the entire thing someday, for now I like the silver & black
1075tech
.338 Win Mag
Well, I didn't get anything. I ordered a screw for my 686. Smith and Wesson changed it several years ago and don't make it anymore.
It left Georgia on the 3rd. Went to Springfield, MA and then Albany. All it says now is "delayed" .
It left Georgia on the 3rd. Went to Springfield, MA and then Albany. All it says now is "delayed" .
Yeah, usps sucks balls. I still have stuff out there in no man’s land since the 17th of Feb.
1075tech
.338 Win Mag
I had to mail my amendment form to Goshen. The same time, I mailed a box to Kentucky. The box to Kentucky beat the envelope to GoshenYeah, usps sucks balls. I still have stuff out there in no man’s land since the 17th of Feb.
4WHLDRFTN
.308 Win
Yeah, usps sucks balls. I still have stuff out there in no man’s land since the 17th of Feb.
when it's a $15k rifle and they can't tell you where it is for weeks..Good Times
Put that thing on safe! Leaving that dangerous thing on fire is craziness. Damn thing might just up and start assaulting people.My second build is complete.... budget all the way.... Will replace the grip with a MOE+ Grip, got the stock for free. Have the parts to pin the mag, will get that in right away!
Built this to learn. Did the upper totally too.... Headspace checks out okay. Have a decent quality BCG in it.... $80 Barrel from PA. ZRO Delta Upper w/ AP Dust cover & FA. . Matrix Arms handguard. Magpul sights. Anderson SS LPT. Anderson Buffer assembly. Raw Anderson Lower buffed out. Will CAMO the entire thing someday, for now I like the silver & black
View attachment 109774
kev74
20×102mm Vulcan
Larry Potterfield was good to me today!
After completing the customers upper earlier, I decided I should do a quick mock-up of my two builds that will be getting completed very soon. After getting a little glimpse of how they’ll turnout, I’m even more excited and I can’t wait to assemble them...they’re gonna be legit! The 13.7” has that ADM upper that has the matching bolt catch cutout for the Radian lower. Both will have completely different Cerakote color schemes.
