Swords, where to buy them from

[Saltwater60]

My kids killing me and wants another sword. I’m not really against buying the kid more weapons but he wanted to buy another junkie oriental looking POS and I said no. He’s mad but I told him I’m not buying him another POS. Anyone know where you can get a descent sword for around $200. I know the price point is kind of low but that’s what I’m willing to spend on his birthday. If I can’t get something descent for that price then I’m fine with that and I almost expect it.

 

[SomeSoldier]

My kids killing me and wants another sword. I’m not really against buying the kid more weapons but he wanted to buy another junkie oriental looking POS and I said no. He’s mad but I told him I’m not buying him another POS. Anyone know where you can get a descent sword for around $200. I know the price point is kind of low but that’s what I’m willing to spend on his birthday. If I can’t get something descent for that price then I’m fine with that and I almost expect it.

Define sword. Length, style, material?

 

[Saltwater60]

Define sword. Length, style, material?

He’s 16 it doesn’t really matter. Just something cool that’s not a POS. He went from wanting a blue dragon Asian style sword to wanting a two-handed European broad sword.

 

[SomeSoldier]

Swords For Sale, Heavy, Classic, And Collectible | Cold Steel

Buy Professional Swords Of The Highest Quality And Construction, Made With Solid Steel And Materials

www.coldsteel.com

 

[Tisto]

If you care to take a road trip, there's a place in Mississauga, Ontario I can send you. Let me see if I can find a web link. Give me a few minutes.

 

[Tisto]

Here you go. I can give you directions. It's very easy to get to.

Medieval Depot: Swords, LARP, Anime, Medieval & Fantasy Gear

Largest variety of fantasy weapons & medieval items ⚔️ Top quality & free shipping in Canada & USA Visit our medieval shop & start your adventure!

www.medievaldepot.com

I'd be willing to bet that @GOPerfect would take a ride with you.

 

[Saltwater60]

Swords For Sale, Heavy, Classic, And Collectible | Cold Steel

Buy Professional Swords Of The Highest Quality And Construction, Made With Solid Steel And Materials

www.coldsteel.com

Thanks. I found a few that are cool but most are out of stock. I think he’s like this one.

COLICHEMARDE DAGGER

The Colichemarde emerged during the decline of the Rapier and the rise of the small sword. With a uniquely shaped blade that was extra wide at its forte but

www.coldsteel.com

 

[Saltwater60]

Here you go. I can give you directions. It's very easy to get to.

Medieval Depot: Swords, LARP, Anime, Medieval & Fantasy Gear

Largest variety of fantasy weapons & medieval items ⚔️ Top quality & free shipping in Canada & USA Visit our medieval shop & start your adventure!

www.medievaldepot.com

I'd be willing to bet that @GOPerfect would take a ride with you.

Wow. Right on man. They have a good selection and look fairly descent. You’ve been there and they are descent quality? Of course I don’t expect a masterpiece for that price or anywhere near it but I don’t want junk that rattles or the handle unwraps after a week.

 

[Tisto]

Actually, I've never been in the store. I used to deliver to a place next to it, and always wanted to go in and look around but never had the time. I did, however, meet the owner once and he had a full set of armor made of metal and leather. It was all beautifully made. I tried on the gauntlet gloves. They were amazing. Each piece of steel was perfectly fitted and riveted. All I can do is point you to them. You'll have to go see for yourself if the quality standard is met.

 

[Acer-m14]

He’s 16 it doesn’t really matter. Just something cool that’s not a POS. He went from wanting a blue dragon Asian style sword to wanting a two-handed European broad sword.

just saying .. how about make your own ... make your own .. forge and hammer out that steel sword ..

when i was that age .. i was making my own num chucks and throwing stars in shop class

ahhh the good old days in shop class .. even turned metal files into knifes then ..

these were even fun to play with ...

Ninja Octagon Sai​

 

[Saltwater60]

just saying .. how about make your own ... make your own .. forge and hammer out that steel sword ..

when i was that age .. i was making my own num chucks and throwing stars in shop class

ahhh the good old days in shop class .. even turned metal files into knifes then ..

these were even fun to play with ...

Ninja Octagon Sai​

My FIL has a forge and we will get there but not yet. I told my kids if they went over and used it with him I’d buy them there own and we could all share it.

 

[Saltwater60]

Actually, I've never been in the store. I used to deliver to a place next to it, and always wanted to go in and look around but never had the time. I did, however, meet the owner once and he had a full set of armor made of metal and leather. It was all beautifully made. I tried on the gauntlet gloves. They were amazing. Each piece of steel was perfectly fitted and riveted. All I can do is point you to them. You'll have to go see for yourself if the quality standard is met.

It looks like they are nicer stuff than what I have been seeing. What I can say is they seem to have a good selection and be upfront about what you are getting. They say battle ready, usable, or high quality. I’m just looking for something that when you pick it up it doesn’t rattle around and want to fall apart. Doesn’t have to be historically accurate and if it’s not that sharp I can sharpen it.
Thanks again and this is likely where we will order from unless that one from cold steel comes in.

 

[Bustedknees]

My kid went to Spain when he was in his senior year. He brought home a bad ass , very heavy sword. I was surprised the school allowed it.

 

[Rocpo]

Grimfrost

 

[FrankenCub]

I've seen civil war swards for $2-300 range.
A friend of mine has a Nazi dress sword and a Japanese sword. I've tried talking him out of one but he won't part with them.

 

[Saltwater60]

He wanted the Damascus biking sword from midevil depot so we will see what it looks like when it gets here. $210 so I didn’t think that was too bad.

 

[Tisto]

Start saving now, because he wants one of these next year !

 

[GOPerfect]

Swords – Historic & Fantasy Replica Blades Collection

Browse Museum Replicas’ collection of historical and fantasy swords. Perfect for collectors, reenactments, stage, and decorative display.

www.museumreplicas.com

I have bought many items from the posted link.

I own a few larger items from Cold Steel as well. I get a really good deal on Cold Steel if you are interested in what they have to offer.

 

[GOPerfect]

Grimfrost is another favorite, some really nice pieces can be found on Etsy as well.

 

[Saltwater60]

Swords – Historic & Fantasy Replica Blades Collection

Browse Museum Replicas’ collection of historical and fantasy swords. Perfect for collectors, reenactments, stage, and decorative display.

www.museumreplicas.com

I have bought many items from the posted link.

I own a few larger items from Cold Steel as well. I get a really good deal on Cold Steel if you are interested in what they have to offer.

Thanks for the offer. Coldsteel had a lot of stuff out of stock but did have some nice stuff and they are a trusted name. I would have preferred to go with coldsteel because I recognize the name and they list all the materials.
I’ll see what this one looks like when it arrives and go from there. They have a good return policy so if I’m not happy I’ll return it and reach out on the cold steel details.

 

[wizrd]

Kult of Athena.com

 

[Beerman]

He’s 16 it doesn’t really matter. Just something cool that’s not a POS. He went from wanting a blue dragon Asian style sword to wanting a two-handed European broad sword.

Claymore or GTFO.

 

[Acer-m14]

where is this guys store

75-year-old swordsman who has made 1,000 Japanese swords​

 

[Saltwater60]

Should be here tomorrow so we will see. I don’t expect expert craftsmanship but something fairly nice.

 

[Tisto]

Pics posted before you wrap it and give it to him..

 

[Saltwater60]

Thanks to @Tisto for the recommendation. I have to say I’m very impressed with the build and the detail of it for the price. It was $200-$220 and it looks very nice. Blade is tight, hand is nice and even and everything fits together nicely with no gaps. The grind on the blade was a bit off in the one section and it showed a bit of rolling from over sharpening but I hit it with a sharpening stone and in 2-3 strokes it’s perfect. I’m sure I’m not using the right term as there’s no damage and it was over sharpened in one area about 2” and the metal at the blades edge was rolled over.
it’s very nice and sharp.

 

[Tisto]

That looks pretty awesome. The damascus steel really sells it.

 

[Saltwater60]

That looks pretty awesome. The damascus steel really sells it.

Absolutely does. I like the Damascus guard and pommel too. It’s very nice. The grip is a tad big for my son so he wants me to sand it down a bit. I’ll need some really fine sand paper before I try it.