Starting a "What did you Get today" thread. Let's give it a try (dont forget pics)

Edwardteach72

Edwardteach72

.475 A&M Magnum
U.S. Military
Messages
14,883
Reaction score
15,065
Location
New York
Picked up a few things today.

The sheet is from Thyrm called the Clens.. they are lense covers for the Surefire X300u. Keep carbon off the lense I'll be using them when at the range or a class. And take it off when I'm carrying.

Next from Battlwerx is just their anti flicker RMR plate. I had the normal sealing plate (never had any issues but figured why not)

And last is the Phlster ARC controls for the x300u, to extend the controls to be easier to reach 20191230_235750.jpg
 
dsdmmat

dsdmmat

Donut Master
Moderator
Messages
10,647
Reaction score
23,426
Location
Alpha Quadrant, Sector 001
togmaster

togmaster

.450/400 Nitro Ex
Messages
12,886
Reaction score
19,030
Location
Buoy 42
Edwardteach72 said:
Picked up a few things today.

The sheet is from Thyrm called the Clens.. they are lense covers for the Surefire X300u. Keep carbon off the lense I'll be using them when at the range or a class. And take it off when I'm carrying.

Next from Battlwerx is just their anti flicker RMR plate. I had the normal sealing plate (never had any issues but figured why not)

And last is the Phlster ARC controls for the x300u, to extend the controls to be easier to reach View attachment 60192
Click to expand...

You have a type 1 RMR? Type 2 eliminated the need for that base plate.
 
knuts

knuts

.45 acp
Messages
414
Reaction score
667
Location
westchester new york
GOYABEAN said:
How many pistols would that hold comfortably.
Click to expand...
Like @dsdmmat said, 3 compacts would fit. I went with 2 ( cause thats all i have lol) plus mags.
I made a mistake on cutting the foam at the first go so i had to change my original layout plan. Cutting these were a pain in the ass. My x acto blade wasnt long enough to cut it clean through.

CA66BBFD-0E48-431B-B73D-E7174CBD7EE5.jpeg
 
Edwardteach72

Edwardteach72

.475 A&M Magnum
U.S. Military
Messages
14,883
Reaction score
15,065
Location
New York
togmaster said:
You have a type 1 RMR? Type 2 eliminated the need for that base plate.
Click to expand...

Yes I have a type 1. I bought it and a about 3 weeks later is when Trijicon announced the type 2. And since it's going on what 2 or 3 years now I cant remember and I've had zero issues with my type 1 I dont see the need to run out and get the type 2
 
Bustedknees

Bustedknees

.308 Win
Messages
3,846
Reaction score
7,419
Location
Madison/oneida/lewis
Hillbilly77 said:
I've been busy organizing my new safe. The top shelf left a lot to be desired because the back of it is cut out to allow for long-barreled guns.
Since I don't have anything that requires that much room for the barrel, the top shelf was largely wasted.

View attachment 60124

I wanted to put pistols on the top shelf but the cutout made it impractical. So, I started thinking it over about how to make the best use of the top shelf and I came up with an idea.
I picked up a cheap pine board & some felt and made an insert to fill in the entire top shelf. I had to make it in 2 pieces because it'd be impossible to get it in there in one piece.
I cut the board to length, then wrapped it with the felt and stapled the felt onto the bottom side of the board.
Once installed, it fills in the top shelf into a solid, usable space.

View attachment 60125

While I was at it, I bought a couple wire pistol racks to put on the top shelf. I bought one 6 gun and one 4 gun rack and they fit in there perfectly.

View attachment 60126

View attachment 60128

There's even enough space under the wire racks to store a couple holsters & magazines. :cool:
Click to expand...
buy a door panel for it, holds pistols, knives, paper pouches, etc..
 
Will556

Will556

.308 Win
LEO / LEA
Messages
2,553
Reaction score
6,184
Location
New York
Edwardteach72 said:
Picked up a few things today.

The sheet is from Thyrm called the Clens.. they are lense covers for the Surefire X300u. Keep carbon off the lense I'll be using them when at the range or a class. And take it off when I'm carrying.

Next from Battlwerx is just their anti flicker RMR plate. I had the normal sealing plate (never had any issues but figured why not)

And last is the Phlster ARC controls for the x300u, to extend the controls to be easier to reach View attachment 60192
Click to expand...
I’ve got my Lantac threaded barrel on the way. But since I ordered the threaded barrel I figured I might as well order my comp. so I ordered the Agency Single Port comp to put on the end of the threaded barrel. I also have the Kägwerks extended slide release on its way as well. I was looking to the Phlster ARC controls for my X300U also. I think I’ll be ordering those eventually as well.
 
Edwardteach72

Edwardteach72

.475 A&M Magnum
U.S. Military
Messages
14,883
Reaction score
15,065
Location
New York
Will555 said:
I’ve got my Lantac threaded barrel on the way. But since I ordered the threaded barrel I figured I might as well order my comp. so I ordered the Agency Single Port comp to put on the end of the threaded barrel. I also have the Kägwerks extended slide release on its way as well. I was looking to the Phlster ARC controls for my X300U also. I think I’ll be ordering those eventually as well.
Click to expand...

I havent added them yet but I already know they will make a huge difference. And there are 3 sizes to choose from which is nice
 
H

Hillbilly77

6.5 Creedmoor
Messages
2,034
Reaction score
8,971
Location
Occupied New York
Jaywmustang said:
BBQ at Hillbill77!!
Click to expand...
In 2008, we started out with a 7 cubic foot chest freezer. Slowly over the years we've expanded our garden and started growing and raising more of our own food. We are now up to a pair of 15 cubic foot freezers in the basement and one 7 cubic foot one upstairs.
My wife does a shitload of canning and preserving. We raise our own chickens and pigs, plus we have a flock of laying hens.
We work our neighbor's beef farm and that keeps us supplied with fresh beef. I try to put a few deer in the freezer every year.

As a rule, we don't buy meat at the grocery store anymore.
 
You must log in or register to reply here.
Top