AR Barrels without muzzle threads

Prudii

Prudii

.357 mag
Messages
563
Reaction score
618
Location
Not NY anymore
Anyone know of a place that stocks these? Ideally a light/medium profile 16" with mid length gas.
Or is my best bet to find a mid 18" and have it cut and crowned?

Not really looking for a match grade but I'd rather not get a BCA or Redx either.
 
dean3690

dean3690

.357 mag
Messages
598
Reaction score
941
Location
Freeville, NY
You may need to just get a muzzle cap pinned and welded or the threads cut off and a crown installed. It's hard to find what you want without threads.
 
GOYABEAN

GOYABEAN

.950 JDJ
Messages
33,916
Reaction score
69,635
Location
Land of Freedom PA
Did you try here :idk: they have Bull barrel

www.jsesurplus.com

JSE Surplus

AR15 parts and accessories. We carry a large line of DPMS, Magpul, Yankee Hill, Command Arms CAA, Leapers, UTG, AccuShot, NC Star, Rock River Arms, SunDevil, Tactical Solutions, Grizzly, Stag Arms, DTI Del-Ton Inc and many others.
www.jsesurplus.com
 
meketrefe

meketrefe

.450/400 Nitro Ex
Messages
12,807
Reaction score
16,330
Location
Dexter, ME
things to avoid:
- M4 style profile barrels.
- pencil profiles (mid / socom is best)
-M4 short length gas port
-Chrome lined barrels, instead look for quality SS or nitrocarburized / melonite
-1/2" threads... 5/8 should be the standard
- a Cap is good just pinned at the joint (do not weld)
-Avoid el cheapo black hole weaponry, psa, faxon, odin, dpms, etc ...barrels

Also...
If 16" is preferred then mid lenght port but 18" with rifle port is the best balance.
stick to 8 twist for best balance. no need for 7 twist for 95% of loads.
.
shilen, white oak, noveske, wilson, lothar, rock, all make the best barrels. my best barrels have been krieger and bartlein. xcaliber cuts well priced barrels with 3 ratchet

there are good 1000 times proven reasons for all above. ask if you need more info.
 
M

mca90guitar

.357 mag
Messages
576
Reaction score
619
Location
NY
Currently looking for a 16" barrel for my featureless build. White oak has nothing in stock and couldn't really give a time line for when they will have them again, rock river arms makes a couple of them but they are heavier.

Saw a company called hitman industries makes one but know nothing about them besides they have a dorkie name.
 
Vapor

Vapor

.308 Win
Messages
4,359
Reaction score
8,105
Location
Susky county PA
meketrefe said:
things to avoid:
- M4 style profile barrels.
- pencil profiles (mid / socom is best)
-M4 short length gas port
-Chrome lined barrels, instead look for quality SS or nitrocarburized / melonite
-1/2" threads... 5/8 should be the standard
- a Cap is good just pinned at the joint (do not weld)
-Avoid el cheapo black hole weaponry, psa, faxon, odin, dpms, etc ...barrels

Also...
If 16" is preferred then mid lenght port but 18" with rifle port is the best balance.
stick to 8 twist for best balance. no need for 7 twist for 95% of loads.
.
shilen, white oak, noveske, wilson, lothar, rock, all make the best barrels. my best barrels have been krieger and bartlein. xcaliber cuts well priced barrels with 3 ratchet

there are good 1000 times proven reasons for all above. ask if you need more info.
Click to expand...


Yes, everyone, please avoid the PSA FN chrome lined barrels. They are terrible. I will take the hit and buy them all up for you guys.
 
Prudii

Prudii

.357 mag
Messages
563
Reaction score
618
Location
Not NY anymore
dsdmmat said:
Hi @Prudii long time no see. I hope life is treating you well.
Green mountain barrels has a couple to choose from. Product Comparison: GM-M35 19" 223 WYLDE Experimental 1:6 twist VS GM-M36 16" 5.56x45mm 1:7 Twist
Click to expand...
I'm doing alright, NC is okay but I'm looking foward to finishing my degree and moving somewhere with actual mountains.

If that 16" was instock I'd order one. I'm trying to keep the weight down on this upper as its going on a SCR lower.

I'm thinking I'll try and find a midlength 18" and have it cut, crowned, and profiled. Or just a rifle 18" and have threads milled off. Not cheap but it'll look nicer than a p&w thread protector.

meketrefe said:
things to avoid:
- M4 style profile barrels.
- pencil profiles (mid / socom is best)
-M4 short length gas port
-Chrome lined barrels, instead look for quality SS or nitrocarburized / melonite
-1/2" threads... 5/8 should be the standard
- a Cap is good just pinned at the joint (do not weld)
-Avoid el cheapo black hole weaponry, psa, faxon, odin, dpms, etc ...barrels

Also...
If 16" is preferred then mid lenght port but 18" with rifle port is the best balance.
stick to 8 twist for best balance. no need for 7 twist for 95% of loads.
.
shilen, white oak, noveske, wilson, lothar, rock, all make the best barrels. my best barrels have been krieger and bartlein. xcaliber cuts well priced barrels with 3 ratchet

there are good 1000 times proven reasons for all above. ask if you need more info.
Click to expand...

This isn't going to be a match rifle, if it cycles reliably, stabilizes 77gr and is at least 3moa it will be fine.
Ive had a psa bargin bin upper with ~3000 rounds of steelcase through it still shoot a 1 moa group with black hills match. I've also had to send back a
 
dsdmmat

dsdmmat

Donut Master
Moderator
Messages
10,895
Reaction score
24,287
Location
Alpha Quadrant, Sector 001
Prudii said:
I'm doing alright, NC is okay but I'm looking foward to finishing my degree and moving somewhere with actual mountains.

If that 16" was instock I'd order one. I'm trying to keep the weight down on this upper as its going on a SCR lower.

I'm thinking I'll try and find a midlength 18" and have it cut, crowned, and profiled. Or just a rifle 18" and have threads milled off. Not cheap but it'll look nicer than a p&w thread protector.



This isn't going to be a match rifle, if it cycles reliably, stabilizes 77gr and is at least 3moa it will be fine.
Ive had a psa bargin bin upper with ~3000 rounds of steelcase through it still shoot a 1 moa group with black hills match. I've also had to send back a
Click to expand...
I like the 19” 1-6 twist barrel it shoots the heavy’s really well. Not too much weight either.
 
meketrefe

meketrefe

.450/400 Nitro Ex
Messages
12,807
Reaction score
16,330
Location
Dexter, ME
Prudii said:
This isn't going to be a match rifle, if it cycles reliably, stabilizes 77gr and is at least 3moa it will be fine.
Ive had a psa bargin bin upper with ~3000 rounds of steelcase through it still shoot a 1 moa group with black hills match. I've also had to send back a
Click to expand...

it doesn't matter if it is a match rifle or not.
There are reasonably priced 16" and 18" quality barrels and groups that are far superior to M4 design, short length porting, pencil stuff and other exotic variants.
a simple mid or socom profile with a modern heavy group is going to outshoot and outlast any mil spec and obviously any imitations.
bottom line the M4 style profile should have never existed in a stoner di system. The only reason the Army screwed up the balance was due to the stupid grenade launcher instead of changing the launcher itself. Civilian market should not be forced by inferior standards and fashions to settle for less.
these facts have been all well documented here and other places through the years.
The problem is finding old threads since the forums search is close to useless.
 
Prudii

Prudii

.357 mag
Messages
563
Reaction score
618
Location
Not NY anymore
Bought this from wilson, see how it is once the whole things together.
shopwilsoncombat.com

BARREL, .223 WYLDE, URBAN SUPER SNIPER, 18", FLUTED, CROWN, STAINLESS, GLASS BEAD, 1-8

Experience the precision of Wilson Combat's Urban Super Sniper stainless barrel. This 18" barrel is designed for the .223 Wylde chamber and features a weight reduction of 20 ounces when compared to the super sniper model barrel resulting in an amazingly nimble and precise tactical rifle with all...
shopwilsoncombat.com shopwilsoncombat.com
 
You must log in or register to reply here.
Top