The m17 is a p320 no? If they didn't get immunity imagine the fallout.
Happy P320 day!
- Thread starter That_FNG
- Start date
M17 is the full sized P320, the M18 is the smaller or "officer" size.
Fallout or not, they shouldn't have been given immunity. If Sig handled the issue properly from jump they wouldn't have been facing this backlash. Instead, they deflected and blamed everyone and everything else.
I personally will never carry any of my P320s ever again.
I agree. Personally, I think this should just about end their company.
Interesting how the pre voluntary upgrade sear didn't have the legs and there were no instances of UCD's. How stupid are the Sig engineers that they would add this leg to the post upgrade sears?
Some people have stated that removing the leg from the sear defeats part of the drop safety update where if dropped, the leg pushes up against the trigger bar and helps prevent the sear from disengaging on the drop. To me this comment makes me think that Sig addressed the drop safety issue but inadvertently and unknowingly caused the UCD issue by adding this sear leg.
The other interesting thing is the pre voluntary upgrade sear looks similar to the P365 sear. I mention this because the P365 platform has not had any instances of UCDs. It was also designed from the ground up unlike the P320 which was essentially a hammered fired system which Sig modified to striker fired during R&D.
The one thing that Wyoming Gun Project should have done is before and after the sear modification (3 P320s in a trenchcoat mod) was a hammer/drop test.
Some people have stated that removing the leg from the sear defeats part of the drop safety update where if dropped, the leg pushes up against the trigger bar and helps prevent the sear from disengaging on the drop. To me this comment makes me think that Sig addressed the drop safety issue but inadvertently and unknowingly caused the UCD issue by adding this sear leg.
The other interesting thing is the pre voluntary upgrade sear looks similar to the P365 sear. I mention this because the P365 platform has not had any instances of UCDs. It was also designed from the ground up unlike the P320 which was essentially a hammered fired system which Sig modified to striker fired during R&D.
The one thing that Wyoming Gun Project should have done is before and after the sear modification (3 P320s in a trenchcoat mod) was a hammer/drop test.
Last edited: