Knife Sharpening

[MilesTeg]

Well it's been a long time coming....... I need to finally do my own knife sharpening. I had a good friend I would get together with a couple times a year and he would sharpen all my knives and I would get him drunk and feed him. Now that I have 3 kids and he has a new girlfriend we seem not to be able to get together as often as we would like.

As a kid I use to sharpen on one of those 3 stones mounted on a triangle contraption. I use to do pretty good one it (at least I thought so). But the last time I tried to so it I wasn't happy with the results.

When I was in the military I bought a Lansky or knockoff. I liked it then because it was compact. What I don't like is it doesn't have a stand. I tried looking online and I don't think the stands they sell for Lansky's are compatible with what I have.

My father now was one the worksharp's belt sanding sharpeners. I have used it a little bit, but wasn't in love with it.

So here's the question. Should I just stop being a sissy and buy a set of stones and learn how to do it the old fashion way? Or is there something out there that I don't know about?

 

[Darth]

Spyderco Sharpmaker.

 

[MilesTeg]

I did like the look of this one. Looks like an upgraded Lansky.

https://www.amazon.com/Work-Sharp-Precision-Adjust-Sharpener/dp/B08L72P245/ref=sr_1_18?crid=1XTGJ4J5CGTXF&dchild=1&keywords=work+sharp+knife+sharpener&qid=1605108207&sprefix=work+%2Caps%2C185&sr=8-18

 

[wizrd]

sharpeningsupplies.com - probably the best assortment of sharpeners anywhere. My go-to favorite is the DMT duo-sharp bench stones. It's worth getting their catalog just for the sharpening tips. -- Lansky - Work Sharp - a few other 'systems' - be careful - it can be a sickness, just like firearms!

 

[Jezman]

Go buy some stones watch you tube videos on how to sharpen. And take a look at how they are sharpened at the factory. I am not a fan of anything but flat stones. When done properly your edge will be good to go. You do not need a system to sharpen your knifes. You need to practice your skill. It takes about 10 to 15 minutes to hone a proper edge.

 

[MilesTeg]

Ya I figured that would be a response. Any recommendations for stone sets?

 

[livingston]

DMT Double Sided Diafold

The Double Sided Diafold® sharpener is one of the most versatile sharpeners. The two sides of diamond sharpening material allow you to tackle tough sharpening projects. The folding design makes this sharpener easy to keep close at hand in your tool box, backpack, or pocket. The stone measures...

www.sharpeningsupplies.com

I am pleased with this setup ... It will put a decent amount of sharpness . during hunting season could just carry in a pocket. .

 

[Mosinitis]

Lansky can put on factory edge, good for prized knives. For kitchen or work knives I use electric sharpeners for speed and simplicity.

 

[masterswimmer]

I'm lazy, so sue me.

Ken Onion Work Sharp for me. Does a fantastic job if you follow directions.

 

[stokes]

I've been using this for about a year now *Bark River Sharpening Kit - KSF Double Sided Hone w/ Compound
It takes some practice to get the right touch and angle but once you figure it out it gives razor sharp results

 

[Mosinitis]

This is what I use for kitchen and work knives.

 

[togmaster]

I use the Lansky system. Works great for smaller knives but is a bit of a pain with longer blades.

 

[Darth]

Ya I figured that would be a response. Any recommendations for stone sets?

Yes.

Spyderco Sharpmaker.

 

[Vapor]

I have a 9" lanksy ceramic medium rod. It does 99% of all the sharpening I need.

Buy a $5 wal mart knife and get a stone and some ceramics. Watch your favorite tv show and play a little. You'd be suprised that you learn to do a lot by feel.

You can also put some sharpie on the edge to make sure you're taking material off of where you should be, and that it is even.

 

[Cooolone]

Ken Onion Work Sharp

This is a fantastic sharpener for those who understand what it does, and doesn't do. I also have it, and a Lansky, and another one or two. Each has its place, but the KO Work Sharp is a really good deal and has my recommendation!

 

[Jezman]

Ya I figured that would be a response. Any recommendations for stone sets?

I like the ceramic stones. Look for them on Amazon or elsewhere tailored to your budget.

 

[S&W Fan]

A Lansky fan here too. I do have a couple of stones that I’ll use from time to time though. It doesn’t really take too long to learn how to use a good stone properly.

 

[MilesTeg]

Sounds like i need to give my lansky a shot again and my fathers work sharp again.

Any thoughts on the work sharp's take on the lansky?

Precision Adjust Knife Sharpener™

The Work Sharp® Precision Adjust Knife Sharpener™ is an angle guided, 3-sided abrasive jig-and-clamp style sharpener that makes manual sharpening faster, easier and more precise than ever.

www.worksharptools.com

 

[Mosinitis]

The best sharpening system ever made for those who take edge weaponry seriously.

 

[Vapor]

https://www.amazon.com/dp/B000B8FW0O?ref=pd_basp_dp_primary

 

[Vapor]

Japanese water stones also work well. The lansky puck works ok too for taking out chips.

Neither will work well on stuff like s30v or even 154 cm. Cermic works much better.

I know free handing is more of an art these days. It amazes me how many people simply cannot do it. Learn it, and soon you'll be sharpening your knives on the bottom of a mug or the top of a car window in a pinch.

 

[JohnD13]

Sounds like i need to give my lansky a shot again and my fathers work sharp again.

Any thoughts on the work sharp's take on the lansky?

Precision Adjust Knife Sharpener™

The Work Sharp® Precision Adjust Knife Sharpener™ is an angle guided, 3-sided abrasive jig-and-clamp style sharpener that makes manual sharpening faster, easier and more precise than ever.

www.worksharptools.com

I just got mine delivered yesterday. I'm a long time Lansky user, this Worksharp tool blows my Lansky set away. The choice of angle adjustments alone is worth the money. They could, maybe, use a few more grits of sharpening stone, but the 320 and 600 grit diamond stones worked fine. And the fine ceramic polished the edges. Great job by the designers at Worksharp, more sharp blades for me!

 

[MilesTeg]

I just got mine delivered yesterday. I'm a long time Lansky user, this Worksharp tool blows my Lansky set away. The choice of angle adjustments alone is worth the money. They could, maybe, use a few more grits of sharpening stone, but the 320 and 600 grit diamond stones worked fine. And the fine ceramic polished the edges. Great job by the designers at Worksharp, more sharp blades for me!

I was actually looking at pulling the trigger on one this past weekend, but they are all out of stock. I'm glad you like yours, I guess I will make the plunge soon.

 

[Saltwater60]

I'm lazy, so sue me.

Ken Onion Work Sharp for me. Does a fantastic job if you follow directions.

This and I love it!! Works great and fast.

 

[SomeSoldier]

Sharpeners - Spyderco, Inc.

www.spyderco.com

 

[JohnD13]

This and I love it!! Works great and fast.

I have one of those too and it's pretty good, but I am particular about sharp tools and admittedly like the hands on aspect, even though it's guided by the fixture. Backward evolution?

 

[MilesTeg]

This and I love it!! Works great and fast.

I tried my fathers a few months ago. Still don't like it. It "works" but very unimpressed. He loves it so that's all it counts.

 

[livingston]

 

[MilesTeg]

I'll be sure to watch it when I get home. I still haven't figured anything out.

 

[GOPerfect]

I just got mine delivered yesterday. I'm a long time Lansky user, this Worksharp tool blows my Lansky set away. The choice of angle adjustments alone is worth the money. They could, maybe, use a few more grits of sharpening stone, but the 320 and 600 grit diamond stones worked fine. And the fine ceramic polished the edges. Great job by the designers at Worksharp, more sharp blades for me!

I can get WorkSharp for 40% off. As soon as this comes back into stock, I am going to hit it up.