Lets talk Red Dots on handguns

[minderasr]

I ended up ordering a Holosun 507K GR X2 for my P365X. Should be here by the end of the week. Looking forward to some range time with both.

Well I may have spoken too soon...or out of turn. Amazon has spoiled me with fast shipping. Tracking shows "Shipment Received, Package Acceptance Pending" since Monday. I have no idea when this damned thing will arrive. So the range report will have to wait.

 

[Podmonkey]

What would the best red dot be for target use?
Which open emitter red dot has the clearest glass, sharpest, most precise dot and biggest window?

 

[Edwardteach72]

What would the best red dot be for target use?
Which open emitter red dot has the clearest glass, sharpest, most precise dot and biggest window?

Trijicon SRO

 

[Podmonkey]

Trijicon SRO

Does that use the standard RMR footprint?

 

[togmaster]

Does that use the standard RMR footprint?

Yes

 

[Podmonkey]

Yes

Ooh, that might be going on the Mk IV then

 

[Edwardteach72]

Ooh, that might be going on the Mk IV then

I'd suggest the 2moa dot.. vs the 6

 

[Podmonkey]

I'd suggest the 2moa dot.. vs the 6

For fine .22 target work absolutely.

 

[Defilade]

 

[minderasr]

Ooh, that might be going on the Mk IV then

I'd suggest the 2moa dot.. vs the 6

I agree. I have a cheap Primary Arms red dot on my Mk IV which is 2 MOA. The dot completely covers the orange bullseye on a 8" shoot-n-c at 30 yds. I imagine a 6 MOA dot would cover much of the target at that distance.

 

[minderasr]

Well I may have spoken too soon...or out of turn. Amazon has spoiled me with fast shipping. Tracking shows "Shipment Received, Package Acceptance Pending" since Monday. I have no idea when this damned thing will arrive. So the range report will have to wait.

Quick range report.

Went to the range today and put 200 rounds through the P365X. I'm used to shooting a G19.5, and I found the Sig shot really low (with proper sight alignment) even at 21 ft. Had to compensate to get reasonably accurate hits on target using the following sight picture (not my image).



Normally I'd have the front sight post aligned (height-wise) to the rear sights, with equal spacing on either side of the front post. Note this is my first Sig, and first time shooting one. Is the above picture the normal and proper sight alignment on a Sig?

With that said, below is my target (8" Shoot-N-C) at 50 ft. Not my best work but still learning this new handgun.



In any case, a fun day at the range. Again 200 rounds without a hiccup. These were my own 124 gr FMJ reloads. The best part, when I got home the 507K X2 was waiting for me. Guess I'll be cleaning the gun and mounting the optic (if I can find the time) this weekend.

 

[Saltwater60]

Quick range report.

Went to the range today and put 200 rounds through the P365X. I'm used to shooting a G19.5, and I found the Sig shot really low (with proper sight alignment) even at 21 ft. Had to compensate to get reasonably accurate hits on target using the following sight picture (not my image).

View attachment 170869

Normally I'd have the front sight post aligned (height-wise) to the rear sights, with equal spacing on either side of the front post. Note this is my first Sig, and first time shooting one. Is the above picture the normal and proper sight alignment on a Sig?

With that said, below is my target (8" Shoot-N-C) at 50 ft. Not my best work but still learning this new handgun.

View attachment 170875

In any case, a fun day at the range. Again 200 rounds without a hiccup. These were my own 124 gr FMJ reloads. The best part, when I got home the 507K X2 was waiting for me. Guess I'll be cleaning the gun and mounting the optic (if I can find the time) this weekend.

Funny mine new sig 365xl shot all left for me. Right up and down the whole target left.

 

[Edwardteach72]

Ooooh I see the SRO comes in 1 moa as well

 

[FLA45fan]

Follow up: another 100 rounds . . .

Bushnell customer service came through like a champ, my lost mounting screw showed up just in time for a short range session.

Here's what I'm playing with right now.
Bushnell RXS-100
4 MOA
Leopold DPP footplate
8 brightness settings (no NV)
IPX7 water resistance
Manual on/off with 12 hour auto. Shut-off
5000 hour battery life
CR2032 battery
Lifetime warranty (5 years for red dots)
Suggested retail $99.

Yup, a hunnert dolla scope! A single C note! And I only paid 79 scoots. Providing I can keep it mounted (Blue loctite is my friend) this should be at least cheap fun.
Ok, flame away . . .

 

[Drinkthekoolaid]

I'd suggest the 2moa dot.. vs the 6

So I'm reading up more on pros/cons of MOA dot size.

I'm leaning towards going with 6moa because I do have astigmatism.

Do you have any feedback or advice? I'm still trying to digest everything.

 

[Edwardteach72]

So I'm reading up more on pros/cons of MOA dot size.

I'm leaning towards going with 6moa because I do have astigmatism.

Do you have any feedback or advice? I'm still trying to digest everything.

Personally I'd go smaller MOA. 2 or 3.25 or 3.5 moa dots are the sweet spot IMO.

With an estigmatism it will make the dot bloom more, so if you already have a 6 moa dot and it blooms out to 12 moa it kind of makes it worse for the shooter

With a smaller dot you can turn the brightness up and will almost give you a perceived larger moa than what it actually is.

Atleast this is my understanding and I do not have experience with an estigmatism .

Also from experience I got my first real red dot the Trijicon RMR RM07 that has a 6.5 moa dot, it was nice for the first few uses, it still is nice, but as I got better with it, the more I wish I had a smaller dot


It's almost the opposite to say getting a motorcycle for the first time.. I had zero experience with riding motorcycles, my first one I bought at 23(??) Was a yamaha ninja 250. It was great for learning on. 3 weeks later I hated it and wish I had a larger bike...

Bigger dots are nice to learn on but eventually wanting a smaller dot is the natural progression

 

[Drinkthekoolaid]

Quick range report.

Went to the range today and put 200 rounds through the P365X. I'm used to shooting a G19.5, and I found the Sig shot really low (with proper sight alignment) even at 21 ft. Had to compensate to get reasonably accurate hits on target using the following sight picture (not my image).

View attachment 170869

Normally I'd have the front sight post aligned (height-wise) to the rear sights, with equal spacing on either side of the front post. Note this is my first Sig, and first time shooting one. Is the above picture the normal and proper sight alignment on a Sig?

With that said, below is my target (8" Shoot-N-C) at 50 ft. Not my best work but still learning this new handgun.

View attachment 170875

In any case, a fun day at the range. Again 200 rounds without a hiccup. These were my own 124 gr FMJ reloads. The best part, when I got home the 507K X2 was waiting for me. Guess I'll be cleaning the gun and mounting the optic (if I can find the time) this weekend.

This video was helpful for me to figure out why I was shooting low with my Beretta APX.

 

[minderasr]

This video was helpful for me to figure out why I was shooting low with my Beretta APX.

Thank you for this. Unfortunately the low shots I experienced were using the military style sight alignment, starting at 7 yds, then moving out to 50 ft once I elevated the front site as pictured in my post.

 

[Drinkthekoolaid]

Personally I'd go smaller MOA. 2 or 3.25 or 3.5 moa dots are the sweet spot IMO.

With an estigmatism it will make the dot bloom more, so if you already have a 6 moa dot and it blooms out to 12 moa it kind of makes it worse for the shooter

With a smaller dot you can turn the brightness up and will almost give you a perceived larger moa than what it actually is.

Atleast this is my understanding and I do not have experience with an estigmatism .

Also from experience I got my first real red dot the Trijicon RMR RM07 that has a 6.5 moa dot, it was nice for the first few uses, it still is nice, but as I got better with it, the more I wish I had a smaller dot


It's almost the opposite to say getting a motorcycle for the first time.. I had zero experience with riding motorcycles, my first one I bought at 23(??) Was a yamaha ninja 250. It was great for learning on. 3 weeks later I hated it and wish I had a larger bike...

Bigger dots are nice to learn on but eventually wanting a smaller dot is the natural progression

You would think so...and that's what I've thought as well. However the more I read the more I am finding recommendations that if you have astigmatism to get something like 4-6 moa.

4 Things to Know About Your New Red Dot Sight

We cover the most commonly reported red dot sight issues including blurry reticles and tilted lenses. Read now to learn about red dot astigmatism.

www.opticsplanet.com

AR-15 Red Dot Sights and Astigmatism

Everything you need to know about AR-15 red dot sights and astigmatism. Brought to you by the AR-15 experts at AT3 Tactical. Click now to learn more.

www.at3tactical.com

I see a starbursting on red dots and apparently the edges of the larger moa dot are less prone to starbursting and appear more crisp and clear vs a smaller 2moa dot that starbursts.

 

[minderasr]

Put another 200 rounds through the P365X, this time using the 507K-GR X2. Had to adjust the windage 8 clicks right to zero it in. I have to say it's taking a little getting used to but I like it. Spot on at 50 ft bench rested. Free hand not so much.

With that said, how do you effectively clean the slide without smearing CLP or solvent on the glass? Probably a dumb question, but even at 61 I find I'm still learning.

 

[GTN]

I’ve got a Holosun 507 on my Glock 19 g5. I’ve only shot it few time as I’m still having problems finding the dot. I kept looking for the stock sights first. Someone suggested putting on suppressor height sights. It made it easier but I won’t carry until I get more rounds through it.
It has 3 reciticals. A 2moa dot, a 32moa circle, and a 32moa with a 2moa dot. I like the combined the best so far.
Thoughts?

 

[Edwardteach72]

Just got in some dry fire targets.

 

[mark60]

I’ve got a Holosun 507 on my Glock 19 g5. I’ve only shot it few time as I’m still having problems finding the dot. I kept looking for the stock sights first. Someone suggested putting on suppressor height sights. It made it easier but I won’t carry until I get more rounds through it.
It has 3 reciticals. A 2moa dot, a 32moa circle, and a 32moa with a 2moa dot. I like the combined the best so far.
Thoughts?

Suppressor sights for a backup, yes but if you're using the sights to find the dot you're doing it wrong. Stand at home and press the gun out from low ready as many times as it takes for your body to learn to press the gun out to the right spot. Red dots are great but they won't let you cheat a poor presentation like open sights will. Once you refine your presentation your dot will be there every time.

 

[minderasr]

I’ve got a Holosun 507 on my Glock 19 g5. I’ve only shot it few time as I’m still having problems finding the dot. I kept looking for the stock sights first. Someone suggested putting on suppressor height sights. It made it easier but I won’t carry until I get more rounds through it.
It has 3 reciticals. A 2moa dot, a 32moa circle, and a 32moa with a 2moa dot. I like the combined the best so far.
Thoughts?

Use the 32 MOA circle with the center dot. Makes finding the dot a lot easier. Once you get used to proper presentation, you can switch to the 2 MOA dot (if that's your preference). At least that's what I've learned from the countless YouTube videos I've seen on the subject, and it's working well for me.

 

[GTN]

Use the 32 MOA circle with the center dot. Makes finding the dot a lot easier. Once you get used to proper presentation, you can switch to the 2 MOA dot (if that's your preference). At least that's what I've learned from the countless YouTube videos I've seen on the subject, and it's working well for me.

That’s exactly what I was thinking. Thanks for confirming

 

[Saltwater60]

Seems sig came out with a pro series pistol red dot. Looks fairly nice. I think the 507K is a better option, but maybe not.

SIG's ROMEO1PRO Review

The ROMEO1PRO is the latest pistol red dot from SIG Sauer and helps fulfill their promise of being a total systems provider.

www.gunsamerica.com

 

[Edwardteach72]

Seems sig came out with a pro series pistol red dot. Looks fairly nice. I think the 507K is a better option, but maybe not.

SIG's ROMEO1PRO Review

The ROMEO1PRO is the latest pistol red dot from SIG Sauer and helps fulfill their promise of being a total systems provider.

www.gunsamerica.com

Sig red dots are garbage.. they have good clean glass and break the second you look at them.

It's so bad that instead of making their optics stronger, sig instead just made a small medal guard you add over the dots

 

[Saltwater60]

Sig red dots are garbage.. they have good clean glass and break the second you look at them.

It's so bad that instead of making their optics stronger, sig instead just made a small medal guard you add over the dots

Well that settles it and it’s the same price as the 507c x2.

 

[Will556]

Well that settles it and it’s the same price as the 507c x2.

Yeah, that same premise (in general) goes for Vortex as well. Vortex pistol optics are trash. Their high end scopes are nice.

 

[FLA45fan]

Anyone have a take on the Palmetto State Armory Dagger glocky gun? Seems too go to be true. Looking at the slide packages, especially the extreme carry slide with an RMR cut, threaded barrel, and tritium night sight front (suppressor height) for $250-270. Got a spare G19 Gen 3 laying around here. . .