Modular Sig Sauer and pistol permit
- Thread starter Raydee
- Start date
MikeyCNY
6.5 Creedmoor
The fire control group is the serialized part, correct? If you don't need to change that, I would think you'd be okay.* I've heard of some people adding their .22 conversion kit to their permit, but then some counties don't care...
I did a quick search, and 'The Old Site' had a few mentions of it, including one of @Gunner57 talking about having to put all of his T/C Contender barrels on his permit.
An old post from TheFiringLine.com mentioned that if the caliber is not listed on your permit, you may be in violation for carrying a caliber not 'registered' to you..
* I am not a lawyer, and I haven't stayed at a Holiday Inn Express in years.
I did a quick search, and 'The Old Site' had a few mentions of it, including one of @Gunner57 talking about having to put all of his T/C Contender barrels on his permit.
An old post from TheFiringLine.com mentioned that if the caliber is not listed on your permit, you may be in violation for carrying a caliber not 'registered' to you..
* I am not a lawyer, and I haven't stayed at a Holiday Inn Express in years.
In Rensselaer county you have to register each caliber that the specific gun can shoot.
My G26 is registered in 9mm and .357 sig as I have a conversion to shoot .357 sig out of it
So one gun with different calibers.
Your county might be different
My G26 is registered in 9mm and .357 sig as I have a conversion to shoot .357 sig out of it
So one gun with different calibers.
Your county might be different
Acer-m14
20×102mm Vulcan
from what i hear its county issue .. some have to list all cals some dont
nortatoga
.338 Win Mag
I did the S&W MP 40 to 9mm conversion, and yes I put it on my license. As an instructor with one of the County pistol safety classes I want to keep everything on the up and up!
Saratoga County required the receipt from Brownells for the barrel with the amendment form and the $3.00 fee and self addressed envelope.
Saratoga County required the receipt from Brownells for the barrel with the amendment form and the $3.00 fee and self addressed envelope.
twax100
9mm
I'm in Saratoga, like nortatoga, and like he said each caliber has to be amended separately. Here at least.
I recently built an AR pistol (see my thread in the handgun section). I went with a 9mm Glock dedicated lower and it has 'Multi Caliber' stamped on the lower itself. When I called the sheriffs office the lady said they haven't allowed multi caliber as an option for about 10 years now. If I want to go from 9mm to .40 I would have to fill out a new amendment form specifying that caliber.
This is just my county though. Yours may be different.
I recently built an AR pistol (see my thread in the handgun section). I went with a 9mm Glock dedicated lower and it has 'Multi Caliber' stamped on the lower itself. When I called the sheriffs office the lady said they haven't allowed multi caliber as an option for about 10 years now. If I want to go from 9mm to .40 I would have to fill out a new amendment form specifying that caliber.
This is just my county though. Yours may be different.
alistair
6.5 Creedmoor
In Orange County - each barrel needs to be registered and on your permit.
Marine Cpl
.577 Tyrannosaur.
So depending on the county, if I decide to shoot. 38 Special out of a .357, I'd have to do an amendment? Same barrel....
nortatoga
.338 Win Mag
You are not doing a conversion!
Robin
.577 Tyrannosaur.
Livingston county requires that each caliber be registered.
Robin
Robin
Robin
.577 Tyrannosaur.
Yep. Its the same as having a contender with multiple calibers.
Robin
Robin
BerettaGuy
.308 Win
are any of you feeling infringed yet?
timboy
.44 mag
I dont know what parts are changed on that model but I know when my Father bought a .22lr conversion slide for his sigP220 he was only required to report it to the sheriffs office,no ammedements needed.
County to County is different though.
County to County is different though.
garyv350
.357 mag
I did this with my AR pistols....listed each with 2 different calibers. Even though i don't have 2 of the uppers done yet, I won't have to amend anything in the future.
Bob
6.5 Creedmoor
When I picked up my wheelguns, I had the gun shop put ".38/.357" on the paperwork. That's how the county added them, and that's how they're reflected on my permit.
Saltwater60
20×102mm Vulcan
I'm going to say it. Just call the ppo in your county to be safe. Call from work or some one else's housenof your worries about them knowing who you are.
MikeyCNY
6.5 Creedmoor
Every time I wake up. And sometimes while I'm asleep.
Although in a way the state saves me money by restricting my rights..
vanderblack
.357 mag
Does anyone know the requirement in Ulster County?
nortatoga
.338 Win Mag
If it is a gun that you carry, I would want it on my license should I be carrying outside of my home County.
I was right in the PPO when I asked them and they were not 100% sure. They are great people but they really don't have all the facts.
Saltwater60
20×102mm Vulcan
Then I would force the issue nicely with them and get documentation. If it's done wrong then it's on them. If the people at the ppo don't know we won't know. Good luck. This state is ridiculous.
Bob
6.5 Creedmoor
I can't blame them. It's because the law simply isn't clear. This is what happens when we have lawmakers attempting to regulate something they know nothing about.
Robin
.577 Tyrannosaur.
FUNY!
Robin
Robin
Marine Cpl
.577 Tyrannosaur.
Taken from Penal Law 400 which gives you the exemption from prosecution from Penal Law 265. Whether your county requires it or not, the Penal Law does. If carrying and ever jammed up for whatever reason, and an overzealous DA decides you weren't 100 percent abiding by the Penal Law, you'd have to defend yourself.
7. License: form. Any license issued pursuant to this section shall, except in the city of New York, be approved as to form by the superintendent of state police. A license to carry or possess a pistol or revolver shall have attached the licensee's photograph, and a coupon which shall be removed and retained by any person disposing of a firearm to the licensee. Such license shall specify the weapon covered by calibre, make, model, manufacturer's name and serial number, or if none, by any other distinguishing number or identification mark, and shall indicate whether issued to carry on the person or possess on the premises, and if on the premises shall also specify the place where the licensee shall possess the same. If such license is issued to an alien, or to a person not a citizen of and usually a resident in the state, the licensing officer shall state in the license the particular reason for the issuance and the names of the persons certifying to the good character of the applicant. Any license as gunsmith or dealer in firearms shall mention and describe the premises for which it is issued and shall be valid only for such premises.
7. License: form. Any license issued pursuant to this section shall, except in the city of New York, be approved as to form by the superintendent of state police. A license to carry or possess a pistol or revolver shall have attached the licensee's photograph, and a coupon which shall be removed and retained by any person disposing of a firearm to the licensee. Such license shall specify the weapon covered by calibre, make, model, manufacturer's name and serial number, or if none, by any other distinguishing number or identification mark, and shall indicate whether issued to carry on the person or possess on the premises, and if on the premises shall also specify the place where the licensee shall possess the same. If such license is issued to an alien, or to a person not a citizen of and usually a resident in the state, the licensing officer shall state in the license the particular reason for the issuance and the names of the persons certifying to the good character of the applicant. Any license as gunsmith or dealer in firearms shall mention and describe the premises for which it is issued and shall be valid only for such premises.
I have the p320 , initially bought the full size 9mm. When I registered it, under caliber I put "9mm/40/357/45"
This was in westchester and it seems ok with them.
edit: i wanted to add that this was the advice of the people from the class i took to get licensed. I wouldnt have been smart enough to think of that!
This was in westchester and it seems ok with them.
edit: i wanted to add that this was the advice of the people from the class i took to get licensed. I wouldnt have been smart enough to think of that!
Last edited:
MikeyCNY
6.5 Creedmoor
That's an interesting idea... but technically aren't you saying you have a caliber when you don't? When the Secret Police decide to audit your 2A Permit and they ask for your .357 barrel that you don't have... what do you do?
Robin
.577 Tyrannosaur.
You get on your knees and say, please, please Mr. Boss man, I'll better, I promise!
Robin
Robin
not sure really. What i'm saying is that this serial number action could shoot any of those calibers. when you convert a 10mm glock to shoot 40s&w do you register it twice? not saying i know the answer. but quite a few of us from my permitting class purchased the 320 and we all did the same thing.