Would you use this holster?

ECU Pirates

ECU Pirates

.308 Win
Messages
3,011
Reaction score
2,686
Location
Broome County
I ordered a holster to carry my M&P with a light attached. I take hikes at dusk and sometimes don't get back before dark. Having an extra night is never a bad thing (even if I had to take it off the gun and use as a normal flashlight). I'm a bit concerned about the trigger guard coverage. I can actually put a finger in and pull the trigger. Would you worry about something getting in there and causing a discharge? I contacted the maker and am awaiting a reply.
 

Attachments

  • blackpoint.jpg
    blackpoint.jpg
    153.1 KB · Views: 59
  • backpoint2.jpg
    backpoint2.jpg
    173.1 KB · Views: 59
  • blackpoint3.jpg
    blackpoint3.jpg
    70.6 KB · Views: 58
Podmonkey

Podmonkey

.577 Tyrannosaur.
U.S. Military
Messages
20,813
Reaction score
28,723
Location
Cambria co. PA
I share your concern. I was looking into Blacpoint Tactical holsters as well. I was not aware there was so much clearance around the trigger guard. That concerns me a lot actually, but I am a bit paranoid when it comes to gun saftey and NDs.
 
MilesTeg

MilesTeg

.338 Win Mag
U.S. Military
Messages
5,046
Reaction score
6,425
Location
Madison Co.
Agree with everyone else. If your in the woods things could get in there and pull the trigger. I wouldn't use it.
 
kev74

kev74

20×102mm Vulcan
Messages
45,565
Reaction score
143,712
Location
Orange Co.
I'd say that holster is at best defective, otherwise its a poor design.
 
togmaster

togmaster

.450/400 Nitro Ex
Messages
12,876
Reaction score
19,019
Location
Buoy 42
There is something wrong there. I've got a Black Point for my Sig and the trigger is completely covered. When I ordered mine I found their customer service to be excellent. Wait for their reply and I'm sure they will make it right. I plan on getting their leather wing holsters for the rest of my pistols.
 
ECU Pirates

ECU Pirates

.308 Win
Messages
3,011
Reaction score
2,686
Location
Broome County
togmaster said:
There is something wrong there. I've got a Black Point for my Sig and the trigger is completely covered. When I ordered mine I found their customer service to be excellent. Wait for their reply and I'm sure they will make it right. I plan on getting their leather wing holsters for the rest of my pistols.
Click to expand...

Is yours a light mount holster?


Sent from my iPhone using Tapatalk
 
togmaster

togmaster

.450/400 Nitro Ex
Messages
12,876
Reaction score
19,019
Location
Buoy 42
ECU Pirates said:
Is yours a light mount holster?


Sent from my iPhone using Tapatalk
Click to expand...

No but that shouldn't make a difference. The holster is moulded for your specific rig/setup. There must be something wrong with the pattern they used.
 
ECU Pirates

ECU Pirates

.308 Win
Messages
3,011
Reaction score
2,686
Location
Broome County
togmaster said:
No but that shouldn't make a difference. The holster is moulded for your specific rig/setup. There must be something wrong with the pattern they used.
Click to expand...

I'm reading that light mount holsters seem to have this issue. Something about clearance for the light. I'm not comfortable with this. It's going back. This would bother me on a revolver, on s striker fired gun there is no way I'm carrying in this.


Sent from my iPhone using Tapatalk
 
Criticalt

Criticalt

.338 Win Mag
Messages
8,221
Reaction score
15,314
Location
WNY
I agree with your decision. If it makes you uncomfortable at all, id send it back.
Your right leg and foot will thank you. ;)
 
togmaster

togmaster

.450/400 Nitro Ex
Messages
12,876
Reaction score
19,019
Location
Buoy 42
I agree that if it don't feel comfortable with it you shouldn't use it. I'm also not sure why you would want to conceal a gun with a light. I could understand it if you needed it for work but as a civilian I think it defeats the purpose of concealment. Good luck with whatever you decide.
 
Podmonkey

Podmonkey

.577 Tyrannosaur.
U.S. Military
Messages
20,813
Reaction score
28,723
Location
Cambria co. PA
That's a shame. Those holster aren't cheap, not by a long shot. Hoping that ECU pirates gets a full refund.
 
ECU Pirates

ECU Pirates

.308 Win
Messages
3,011
Reaction score
2,686
Location
Broome County
togmaster said:
I agree that if it don't feel comfortable with it you shouldn't use it. I'm also not sure why you would want to conceal a gun with a light. I could understand it if you needed it for work but as a civilian I think it defeats the purpose of concealment. Good luck with whatever you decide.
Click to expand...

It's very easy to conceal. Button up shirt and go. It's even easier in cool weather. The light does not go past the muzzle so it's no different than normal owb carry. Like I said I like having lights in the woods at dusk and dawn. This is also my nightstand gun so it's nice to grab it and go. I have been lost in the woods without a light in the past. That will not happen again. Even if I have to take it off the gun and use as a normal light I have a back up. Night sights are about worthless in my opinion and I like to
See what I'm shooting at. I will leave the civilian thing alone.... haha


Sent from my iPhone using Tapatalk
 
Darth

Darth

Bunny In Chief
Messages
19,025
Reaction score
23,673
Location
MoCo
Bad pics.

How about a right angle shot? These seem to be trying to emphasize a predetermined stance.
 
ECU Pirates

ECU Pirates

.308 Win
Messages
3,011
Reaction score
2,686
Location
Broome County
The trigger guard is covered. Right angle shot won't show otherwise. It's just got a gap on either side I can put a
Finger in.


Sent from my iPhone using Tapatalk
 
Celt

Celt

.338 Win Mag
Messages
9,150
Reaction score
18,407
Location
Westchester
Nope, i wouldnt use it. Get a new one man, dont risk it. Im glad you asked, thats exactly what forums are for.
 
ECU Pirates

ECU Pirates

.308 Win
Messages
3,011
Reaction score
2,686
Location
Broome County
I will post pics comparing my roc city vs this one. I will have to get it In the morning it's in the bedroom and the wife is sleeping. Here are some pics of another kydex holster on a sit and a leather holster on the same m&p. I will also post side pics even though that is not concern, it's the gap that I can put my finger in and pull the trigger. I'm not forcing it in either.
043d0a38d6d96831f7c9b9d9c5c60406.jpg
56915680f4262ef830a657ab8aee74d1.jpg
3c6ddea12fcfd6ac0a1d968a0883619e.jpg
2065a9deeb9761a3f2ccad324a56fd9a.jpg
e1f250a2dc51ce59b3cc87a5e7724c80.jpg
69a59ed540baf5f610eefea0e7b96390.jpg



Sent from my iPhone using Tapatalk
 
ECU Pirates

ECU Pirates

.308 Win
Messages
3,011
Reaction score
2,686
Location
Broome County
Darth said:
Bad pics.

How about a right angle shot? These seem to be trying to emphasize a predetermined stance.
Click to expand...

I took pics of what concerned me. Does not make much sense to document what's not concerning me but side pics now posted.


Sent from my iPhone using Tapatalk
 
Last edited:
ECU Pirates

ECU Pirates

.308 Win
Messages
3,011
Reaction score
2,686
Location
Broome County
Well Blackpoint said there is nothing wrong with it. They try to keep that gap down while still allowing a smooth draw they said. I'm not comfortable with that seeing how I have kids running around my house. I want a flush fit over my trigger guard. A Raven concealment holster had a similar issue on another forum and the owner of the company said it was a defect and should have never left their facility.

From another forum:
"I was carrying my Glock 19 with TLR - 3 in a raven concealment phantom LC IWB and loved the combo. The reason I stopped using it was the large open area around the trigger to accommodate the light and everything seeming to gravitate towards it. It's large enough I can pull the trigger with the pistol holstered.

About two months into wearing this setup I came close to having an ND. I was chopping down an acacia tree in my backyard and had a twig of the tree make it inside my button down shirt and into my holster. Upon inspection the twig had gone inside the trigger guard and out the other side with two thorns in front of the trigger. I had to pull the gun out of the holster while keeping pressure on the twig till I could safely clear the twig from the trigger guard. One of the thorns did a good number on my TLR-3's bezel while I was doing this.

After this happened I decided to go back to my old setup. I'm going to look at the CT Lightguard when it comes out."

There are pics and it looks like mine.

The reply from Raven:

"Your holster is out of spec and should have never left our doors. I apologize for the mixup. Please contact me and I will replace it."

Just something to consider if you are planning on ordering a light mount holster. With that being said I have no idea if raven fixed it or refunded the guy.
 
RandallOfLegend

RandallOfLegend

.40 S&W
Messages
194
Reaction score
97
Location
Rochester
Look up some youtube videos on tweaking kydex with a hair dryer. I believe you can gently smoosh the kydex inwards to close the gap. From the right angle shot it looks like it's covering the side profile, you just have too much space. Obviously be sure that the kydex isn't bent into the trigger guard in such a way the trigger could be pulled when holstering.
 
NirvanaFan

NirvanaFan

6.5 Creedmoor
Admin
Messages
2,237
Reaction score
3,022
Location
Monroe County, NY
Yeah, after seeing those side pics, I probably wouldn't use it. I wasn't sure if the trigger guard went further back or stopped where it does. It's possible to have a zipper tassel or something get caught in there. I'd send it back.
 
You must log in or register to reply here.
Top