AR 15

Podmonkey

Podmonkey

.577 Tyrannosaur.
U.S. Military
Messages
21,651
Reaction score
30,274
Location
Cambria co. PA
@vago, I would just abandon the notion of fixed magazine ARs of you need it for anything else beyond a range toy. You are far better off with a "featureless" rilfe and the very best among those is the FightLite SCR-

maxresdefault.jpg

SCR®

fightlite.com fightlite.com

With something like that you can retain the detachable magazine and have something that is actually useful, as opposed to a cumbersome range toy. Apparently the Magpul rifle stock can be made to work which I think looks very sharp-
5b264157a5e9f3f65239472d1eec46da.png
The SCR is simply going to be your best NYS compliant option.
You could also go with a Thordesen stock-
6591e5531f220f79674031fa5e3c2c54.jpg

Also don't be so hung up on the BCM. They are far from the be all and end all brand. In fact you will be hard pressed to find any kind of AR and you should be prepared to pay out your anus when you do find one.
 
MillidotShooter

MillidotShooter

.40 S&W
LEO / LEA
U.S. Military
Messages
196
Reaction score
293
Location
Pennsylvania
spat said:
That is a very difficult thing to legislate.

Basing laws on what you claim someone's intention when designing something is ends up being a train wreck.

Do you want to come up with the test for how to determine if a magazine was "intended" to detach or not ?

You cannot legitimately make a law that says "you know, we know it when we see it".
Click to expand...

In essence that is what the state HAS done... It's an open-ended interpretation specifically designed to trap people, since there is no definition within the law addressing magazine removal for ANY reason including Maintenance or Repair. The only thing I have been told is, it should require tools to remove the mag, but not how difficult it should be. Removal of the maglock I use actually requires the use of a drill. And it actually destroys the lock AND the threads, post and spring on Mag Release Bar in the process.
 
spat

spat

.950 JDJ
Messages
30,335
Reaction score
64,107
Location
Formerly Geneseo, NY. Now free in AZ
MillidotShooter said:
In essence that is what the state HAS done... It's an open-ended interpretation specifically designed to trap people, since there is no definition within the law addressing magazine removal for ANY reason including Maintenance or Repair. The only thing I have been told is, it should require tools to remove the mag, but not how difficult it should be. Removal of the maglock I use actually requires the use of a drill. And it actually destroys the lock AND the threads, post and spring on Mag Release Bar in the process.
Click to expand...
Bottom line though is that there are tens of thousands of rifles in NY using these controversial compliance methods and many years later there are no convictions for any of them.

So, in a practical sense, they are all good.
 
MillidotShooter

MillidotShooter

.40 S&W
LEO / LEA
U.S. Military
Messages
196
Reaction score
293
Location
Pennsylvania
spat said:
Bottom line though is that there are tens of thousands of rifles in NY using these controversial compliance methods and many years later there are no convictions for any of them.

So, in a practical sense, they are all good.
Click to expand...

Perhaps... But I prefer to err on the side of caution and go as complicated as that which is feasible. Don't want to be the Crash Test Dummy on one of these "Easier" workarounds... And I can only go by what the dude on the Hotline told me... "Make it require tools...". I'm a retired LEO, but I am NO EXPERT in the interpretation of the law.
 
MillidotShooter

MillidotShooter

.40 S&W
LEO / LEA
U.S. Military
Messages
196
Reaction score
293
Location
Pennsylvania
spat said:
Bottom line though is that there are tens of thousands of rifles in NY using these controversial compliance methods and many years later there are no convictions for any of them.

So, in a practical sense, they are all good.
Click to expand...
Also, there is the wording "Readily Capable of accepting a magazine". This alone means, to my mind, that if you can insert a magazine with the rifle assembled it is "Readily Capable". For my setup, first I have to break the action apart. Next I have to disassemble the mag by removing the spring and follower. Then I have to wedge a tool between the mag and mag release to actually get the mag out. Then insert a new mag WITHOUT the spring and follower, install the spring and follower, and THEN reassemble the rifle. That, in my mind, is NOT "readily capable"... And the only time I go through all that crap is when I am cleaning, swapping out the .223 Wylde upper for the 6.5 Grendel upper, or there is some issue I need to address.
 
BDinPutnam

BDinPutnam

.475 A&M Magnum
Messages
14,490
Reaction score
20,854
Location
Someplace else
spat said:
Bottom line though is that there are tens of thousands of rifles in NY using these controversial compliance methods and many years later there are no convictions for any of them.

So, in a practical sense, they are all good.
Click to expand...

Yeah but I can't find "everybody is doing it!" as an affirmative defense listed anywhere in the penal code.

:D
 
Chevusa

Chevusa

.338 Win Mag
Messages
6,718
Reaction score
7,645
Location
Erie
Saltwater60 said:
I’ve looked into the AR MAG lock and I’ve decided for myself that it is not legal in NYS because the magazine drops free and you put the upper and lower back in and reinsert the magazine. In order to have features you need to have the gun not accept detachable magazines. This does accept magazines therefore making it illegal. Everyone just says fixed mag and thinks that means fixed mag while firing/shooting. The safe act says can’t accept detachable magazines. This is illegal and the website does specifically say it’s good to go in California. I saw nothing in NYS.

Good luck.
Click to expand...
We need a design that prevents the rifle from accepting a mag when it is closed. There's gotta be a way to do it. These prevent the mag from releasing but if a mag is not in they will not prevent one from being inserted and that's the problem. Someone's gotta be able to come up with something.
 
Chevusa

Chevusa

.338 Win Mag
Messages
6,718
Reaction score
7,645
Location
Erie
I had a dream where I had this friend who's got an AR-10 that he built and and AR-15 and both are full functioning and he's got 30 round mags loaded up for the AR-15 for home defense. In the dream I asked if he was worried about it not being compliant and he said nope. He's not going to drive around with them and they are to be kept in his house. If he's gotta use them to save his life, he will worry about any problems then. Then I woke up from the dream and thought I was lucky to not have a friend that would actually do these things. o_O
 
MillidotShooter

MillidotShooter

.40 S&W
LEO / LEA
U.S. Military
Messages
196
Reaction score
293
Location
Pennsylvania
Chevusa said:
We need a design that prevents the rifle from accepting a mag when it is closed. There's gotta be a way to do it. These prevent the mag from releasing but if a mag is not in they will not prevent one from being inserted and that's the problem. Someone's gotta be able to come up with something.
Click to expand...

You could weld the mag to the lower. That would prevent it from EVER accepting another mag, even when completely disassembled. Downside is it would also destroy the lowers Mag well. You could replace worn-out springs and followers without too much of an issue., but that would truly be a fixed mag. And not sure what that kind of damage the heat would do to the Mag itself. Metal mags are pretty thin-walled.
 
spat

spat

.950 JDJ
Messages
30,335
Reaction score
64,107
Location
Formerly Geneseo, NY. Now free in AZ
MillidotShooter said:
You could weld the mag to the lower. That would prevent it from EVER accepting another mag, even when completely disassembled. Downside is it would also destroy the lowers Mag well. You could replace worn-out springs and followers without too much of an issue., but that would truly be a fixed mag. And not sure what that kind of damage the heat would do to the Mag itself. Metal mags are pretty thin-walled.
Click to expand...
Are you getting an aluminum magazine or a steel lower ?
 
spat

spat

.950 JDJ
Messages
30,335
Reaction score
64,107
Location
Formerly Geneseo, NY. Now free in AZ
BDinPutnam said:
Yeah but I can't find "everybody is doing it!" as an affirmative defense listed anywhere in the penal code.

:D
Click to expand...
True, but a law that is never enforced isn't much of a deterrent either.

Blowjobs were illegal in several states until a SCOTUS case a while back. I don't know how many people turned them down because of that though.
 
Robin

Robin

.577 Tyrannosaur.
Messages
20,582
Reaction score
44,632
Location
Livingston County
I did one with a Thordesen stock, I like being able to remove the mag, but I find the stock bulky kinda heave and well, ugly, and overall my like's are out-weighted by my dislikes. Were I to do it again I would go with the SCR. There, I talked myself into it.
Robin
 
6

6AM

.38 Special
Messages
32
Reaction score
30
Location
Buffalo
I prefer the look of the Resurgent Arms grip over the Thordesen stock. It's pretty comfortable, too. I recommend buying their end plate, though, because it's uncomfortable without something like it.
 
6

6AM

.38 Special
Messages
32
Reaction score
30
Location
Buffalo
Podmonkey said:
@vago, I would just abandon the notion of fixed magazine ARs of you need it for anything else beyond a range toy. You are far better off with a "featureless" rilfe and the very best among those is the FightLite SCR-

View attachment 82726

SCR®

fightlite.com fightlite.com

With something like that you can retain the detachable magazine and have something that is actually useful, as opposed to a cumbersome range toy. Apparently the Magpul rifle stock can be made to work which I think looks very sharp-
View attachment 82727
The SCR is simply going to be your best NYS compliant option.
You could also go with a Thordesen stock-
View attachment 82729

Also don't be so hung up on the BCM. They are far from the be all and end all brand. In fact you will be hard pressed to find any kind of AR and you should be prepared to pay out your anus when you do find one.
Click to expand...

How do those FightLite SCR's cycle without a buffer?
 
Edwardteach72

Edwardteach72

.475 A&M Magnum
U.S. Military
Messages
14,883
Reaction score
15,052
Location
New York
dsdmmat said:
Yes, that A firing pin and the cam pin
Click to expand...

Damn I legit thought their carriers where a full on BCG.. thats kind of shitty for say someone who isn't to gun knowledgeable, sees this drops 700 bucks.

But then again not that expensive of parts.. but then imagine buying a bolt, then see you dont have a firing pin and cam pin hahaha
 
You must log in or register to reply here.
Top