Custom knife shopping

Celt

Celt

.450/400 Nitro Ex
Messages
9,919
Reaction score
20,649
Location
Westchester
So with the recent knife talk ive been looking at tons of knives. Was debating between a $50 beater, or a nice custom $200 edc.. right now im really liking these. The Lucky 13 is my leading choice right now. Resized_803058f7bda718ff3abfc057403ed767.jpg
 
dsdmmat

dsdmmat

Donut Master
Moderator
Messages
11,517
Reaction score
26,176
Location
Alpha Quadrant, Sector 001
In high school I made a few knives for projects in Metal shop. I am not sure where they went. Probably in some storage unit my mother has. They were made out of power hacksaw blades. I had to use an arc welder to punch holes in the shank to mount the handle which I made in wood shop. Then I took it one step further and made a sand cast of them and poured aluminum handles so they would never come off the shank.

There are a few custom knives I would like to get but, the gun budget gets in the way. I just ordered 2000 bullets ( Nosler Custom Competition) which would have been more then enough to get a nice Damascus bladed knife.
 
Criticalt

Criticalt

.338 Win Mag
Messages
8,717
Reaction score
16,530
Location
WNY
I have a serious knife addiction. Sinse finding Bark River knives I have bought them pretty exclusively.
Bark River Knives
However, the other day while at Walmart, I had the urge to buy these cheapo Mossy Oak brand, half leather stacked knives for $19.99. I like beaters just as much as quality knives sometimes. I have a real hard time using $200 knives for their intended uses.
20161112_180724.jpg
 
minderasr

minderasr

6.5 Creedmoor
Messages
1,570
Reaction score
2,176
Location
Third Rock From The Sun
Saltwater60 said:
Sounds dangerous. I love the finish on the blade. It looks like it's already killed a whole bunch of things.
Click to expand...

It's mostly killed headcrabs.

HeadcrabZombie_003.JPG
 
MilesTeg

MilesTeg

.338 Win Mag
U.S. Military
Messages
5,043
Reaction score
6,447
Location
Madison Co.
Celt said:
View attachment 4588
I think i need a facebook to contact this guy.

https://m.facebook.com/halflifeknives/

I dont have fb, so reach out and post up average prices.


Heres another one i like, its called "madmax" and they are $350 a piece.
Click to expand...

Ya that's why I asked. I don't FB either. I did see he had a phone number and a 6 week lead time.

I still don't know if I would actually carry a fixed blade. I'm not a knife guy but those at too cool not to look into farther.
 
Celt

Celt

.450/400 Nitro Ex
Messages
9,919
Reaction score
20,649
Location
Westchester
Im not a BIG knife guy, but i do have a good handful. Mostly fixed blades though. Never spnt over 100 before on one either, but i might after the new year.
 
MilesTeg

MilesTeg

.338 Win Mag
U.S. Military
Messages
5,043
Reaction score
6,447
Location
Madison Co.
Celt said:
Im not a BIG knife guy, but i do have a good handful. Mostly fixed blades though. Never spnt over 100 before on one either, but i might after the new year.
Click to expand...
This is me to a T also. These threads are starting to peak my interest.
 
Cooolone

Cooolone

.338 Win Mag
Messages
6,312
Reaction score
9,785
Location
NY, USA
Knives, like guns, get better once you step outside mass production and spend some cash... I consider entry level up to $250-$300. Better knives start above $300, better steel, better made, lifetime of service guaranteed. Then you go $750ish and above and omg, you'll start spending $$$. My EDC is worth more than my Sig Legion, and if you handle it, you'd understand. Weight, balance, opening, edge/steel!!! If you're gonna splurge, step it up ; )

Check
Www.Forthenrycustomknives.com
 
Doc8404

Doc8404

.450/400 Nitro Ex
Messages
13,680
Reaction score
24,363
Location
Oneida County NY
There's a guy on LinkedIn by the name of Charles Neely III from TX. told him her should join here so he could show his knives. Some nice pieces. I have NO use for them, but....tempted.
 
MilesTeg

MilesTeg

.338 Win Mag
U.S. Military
Messages
5,043
Reaction score
6,447
Location
Madison Co.
Cooolone said:
Knives, like guns, get better once you step outside mass production and spend some cash... I consider entry level up to $250-$300. Better knives start above $300, better steel, better made, lifetime of service guaranteed. Then you go $750ish and above and omg, you'll start spending $$$. My EDC is worth more than my Sig Legion, and if you handle it, you'd understand. Weight, balance, opening, edge/steel!!! If you're gonna splurge, step it up ; )

Check
Www.Forthenrycustomknives.com
Click to expand...

Wow I can honestly say until this new forum I had no clue that people owned knives like that. Right now I'm carrying a cheap throw away because I'm too afraid to lose a $40 knife.
 
Doc8404

Doc8404

.450/400 Nitro Ex
Messages
13,680
Reaction score
24,363
Location
Oneida County NY
Cooolone said:
Knives, like guns, get better once you step outside mass production and spend some cash... I consider entry level up to $250-$300. Better knives start above $300, better steel, better made, lifetime of service guaranteed. Then you go $750ish and above and omg, you'll start spending $$$. My EDC is worth more than my Sig Legion, and if you handle it, you'd understand. Weight, balance, opening, edge/steel!!! If you're gonna splurge, step it up ; )

Check
Www.Forthenrycustomknives.com
Click to expand...

WTF bro. You have issues man.
Corrie Schoeman - Xecute Flipper - Fort Henry Custom Knives
 
You must log in or register to reply here.
Top