kev74
20×102mm Vulcan
Titanium is way stronger than aluminum, so its less likely that those tiny screws will pull out.
I got to handle one of those Polymer 80s with a titanium slide. The thing was unbelievably light!
Lets talk Red Dots on handguns
- Thread starter Edwardteach72
- Start date
I got to handle one of those Polymer 80s with a titanium slide. The thing was unbelievably light!
This
nortatoga
.338 Win Mag
My Hip replacement was Titanium, Just saying LOL!!!
Do you have a red dot mounted to it?
BMF JK
.44 mag
I got a guy !! Bahaha
nortatoga
.338 Win Mag
Waiting on a good Sale!!!
I run this setup for work.
Glock 45 (Blue Label)
Trijicon RMR Type 2 3.25 MOA
C&H Precision V4 MIL/LEO Plate
Trijicon Supressor 3 Dot Night Sights
Surefire X300U(B)
Hornady Critical Duty 135+P
Suits me.
View attachment 145851
Glock 45 (Blue Label)
Trijicon RMR Type 2 3.25 MOA
C&H Precision V4 MIL/LEO Plate
Trijicon Supressor 3 Dot Night Sights
Surefire X300U(B)
Hornady Critical Duty 135+P
Suits me.
View attachment 145851
Sig offered a new pistol red dot. let's see Aaron review it. I don't think it will past the test.. Too much going on with it.
BerettaGuy
.308 Win
Calling for a humor break!
MikeyCNY
6.5 Creedmoor
Were iron sights ever really made of iron?
MikeyCNY
6.5 Creedmoor
Saw this posted on another forum, new Holosun 509 with the ACSS reticle -
Holosun HE509-RD Enclosed Solar Powered Red Dot Sight w/ MOS Mounting Plate - ACSS Vulcan Reticle
The Holosun 509 is a fully enclosed pistol red dot sight that comes with the ACSS Vulcan Reticle designed to improve speed and accuracy.
www.primaryarms.com
Saw this posted on another forum, new Holosun 509 with the ACSS reticle -
Holosun HE509-RD Enclosed Solar Powered Red Dot Sight w/ MOS Mounting Plate - ACSS Vulcan Reticle
The Holosun 509 is a fully enclosed pistol red dot sight that comes with the ACSS Vulcan Reticle designed to improve speed and accuracy.www.primaryarms.com
New footprint is a fail
I can see this for people wanting to throw it on a PCC (sub gun) or even a really small .300blk rifle
Or even as an offset for an LVPO.
But yea on a pistol I don't see the point of the chevron over a dot
1075tech
.338 Win Mag
Ok. Seriously considering a 509T-X2 with included RMR plate for my P320C
Opt. 1 -
This will likely be what I end up doing. Takes a lot longer but is the most "economical" option. Send existing slide out (Jagerwerks?) to be milled for RMR footprint. Anything else I should consider here?
Opt. 2 -
Purchase additional slide from Sig milled for R1P and use adapter plate to RMR. This would only take a week or so to accomplish but would be more $$. Thoughts on this?
Opt. 1 -
This will likely be what I end up doing. Takes a lot longer but is the most "economical" option. Send existing slide out (Jagerwerks?) to be milled for RMR footprint. Anything else I should consider here?
Opt. 2 -
Purchase additional slide from Sig milled for R1P and use adapter plate to RMR. This would only take a week or so to accomplish but would be more $$. Thoughts on this?
Will the 509t-x2 work with an rmr plate?? I thought the 509t had a different footprint similar but not same to the acro p1/2
Edit.. I think I see what you are saying.. the mounting plate mounts to the rmr footprint itself?? Yes?
Edit.. I think I see what you are saying.. the mounting plate mounts to the rmr footprint itself?? Yes?
Question- with a cowitnessed optic is it possible to lift your line of sight, with your eye and not changing how you are aiming the gun, to get the dot off the irons and not change the POI?
In other words taking advantage of the zero parallax shift of a red dot to get the dot off of the front sight post and still have the bullet hit where you want.
In other words taking advantage of the zero parallax shift of a red dot to get the dot off of the front sight post and still have the bullet hit where you want.
1075tech
.338 Win Mag
That's how I understand it. The plate fits the RMR footprint.
Hmmm either option sounds like a decent way to go.. is the price difference a huge difference?? If not then why not 2 slides lol if it is then I'd go option 1 (Jagerwerks does great work)
More or less
Yes.. as long as the dot is anywhere in the window it's g2g
1075tech
.338 Win Mag
I guess there is a third option. That would be to buy a second slide (~$250) and send it out to be milled (~$125) for direct fit of whatever optic. Opt 2 would be ~$299 for the slide already cut to R1P but then try to find a plate or send it out for modification. CHWS makes plate but it requires RMR pattern holes in addition to the R1P holes
I'm still not feeling the pistol red dot thing though I admit I shoot very little these days.
I will also admit I can get hits on an IPSIC silhouette @ 90 yards with the 320PXP. I don't get many hits mind but I can't hit anything at all with irons at that distance. However at ranges 25 yards and in I don't perceive much benefit.
Once I find a permanent range solution and I can afford the ammo I'll keep working on it but as it stands now I have no desire to put red dot on my go to defensive pistols.
I was about to check FCD and see if they also make a plate, but then remembered Rodger refuses to make anything that supports holosun directly.
As for the main question topic, this is one reason I'm not a fan of optic ready sigs as the company actively works to make sure that only their optics of choice are used (and extremely difficult/expensive to use some other companies dot)
Well this is a shame to hear.
1075tech
.338 Win Mag
Found a new slide from a Sig vendor. Comes with the suppressor height sights and the Romeo 1 Pro. I took it off and verified that the slide is also drilled and tapped for the RMR footprint. Ordered the Holosun 509t-x2.
fnfalguy
.308 Win
It’s probably a sign when you happen to find a 507k laying around the house and order a G48 MOS to put it on, right? I mean, I can probably stop at any time. I think.
Awesome ... good score