Cant wait to see this!!
Lets talk Red Dots on handguns
- Thread starter Edwardteach72
- Start date
BMF JK
.44 mag
It was tough to see it and touch Friday night and not able to take it home !
Gotta get my permission slip first thing tomorrow morning from the county clerk .
gun_slinger_boy
.338 Win Mag
The screws it comes with should be more than enough. That "gasket" is super thin. I looks like you would have maybe 1 less thread that screws into the holes. If it were me, I would actually use this.
Reason being, precut gaskets never work as well as a custom made gasket. This is why many car manufacturers use gasket maker from the factory.
BMF JK
.44 mag
She’s home and looking all naked without a rmr . That will be fixed soon .
Great info on red dots and mounting specs.
optics-info.com
Footprints/Mounting Standards on Red Dot Sights - Optics Trade Blog
In this article, the most common footprints/mounting standards used on red dot sights are listed. Each standard is described and an image of it is added.
optics-info.com
MikeyCNY
6.5 Creedmoor
Sneak peek -
Won't be able to get it mounted and tested for a week or two, as the 365XL it's going on is my daily carry and I need 24+ hours for the Loctite to cure, and of course to get it zeroed at the range.
I'll take plenty of comparison pics with my current 507k-Gr x2.
Opted for the "Multiple Reticle System" version as I've been experimenting with the Circle+Dot combo, though it is a little cramped on such a small window. Man these things are getting expensive, part of the draw of Holosun for years for less expensive but just as good; at $400+ you're getting close to Trijicon RMR territory, except for the whole enclosed sight thing...
Speaking of enclosed sights, a few new options introduced at SHOT Show -
First up, from Viridian, competing against Aimpoint ACRO for Biggest Mailbox Sight (it actually does use the ACRO footprint), at MSRP of $459 -
www.thefirearmblog.com
And a claim of "toughest pistol optic ever" from SIG Sauer, designed to mount directly to M17/M18 slides, think they mentioned in the video around $600, WOOF -
www.thefirearmblog.com
Won't be able to get it mounted and tested for a week or two, as the 365XL it's going on is my daily carry and I need 24+ hours for the Loctite to cure, and of course to get it zeroed at the range.
I'll take plenty of comparison pics with my current 507k-Gr x2.
Opted for the "Multiple Reticle System" version as I've been experimenting with the Circle+Dot combo, though it is a little cramped on such a small window. Man these things are getting expensive, part of the draw of Holosun for years for less expensive but just as good; at $400+ you're getting close to Trijicon RMR territory, except for the whole enclosed sight thing...
Speaking of enclosed sights, a few new options introduced at SHOT Show -
First up, from Viridian, competing against Aimpoint ACRO for Biggest Mailbox Sight (it actually does use the ACRO footprint), at MSRP of $459 -
[SHOT 2023] New Viridian FX45 Closed Emitter Green Dot Sight and More
New from Viridian this year is a closed emitter green dot sight, the FX45.With a 5 MOA green dot, 6061 aluminum housing and fitting into the Aimpoint ACRO footprint, the Viridian FX45 is available at an MSRP of $459.00.Viridian is also offering a host of other new and updated sights, lights and...
www.thefirearmblog.com
And a claim of "toughest pistol optic ever" from SIG Sauer, designed to mount directly to M17/M18 slides, think they mentioned in the video around $600, WOOF -
[SIG Sauer 2023] The Toughest Pistol Optic Ever Made? The New Sig Romeo M17
TFB and TFBTV’s coverage of SHOT Show 2023 is proudly sponsored by 5.11 Tactical.Click below to check out their new products:http://bit.ly/3w8Z8PeIn this episode of TFBTV, James Reeves is at Sig Range Day to talk about he new enclosed optic from Sig’s electro optic division…and how the Romeo M17...
www.thefirearmblog.com
Beerman
6.5 Creedmoor
I’d love to try the EPS carry compared to my 507k on the 365X. I’m gonna need a full report. GoonTube video influencer content creator type, not just some boring post on this lame ass forum. 
BMF JK
.44 mag
So for reference I found what is a filler plate for the rmr and holoson on the p320 slides that have the rmr holes . It fills the gap between the rds and the slide cut .
chpws.com
I just ordered one along with a rmr from PA . I’ll give an update once I receive and install the rmr on my p320 .
SIG P320 RX Series / Pro Series / AXG Scorpion w/ R1P / DPP CUT w/ RMR / Holosun Holes - Filler Plate for Trijicon RMR / SRO / RCR / Holosun 407C / 507C / 507Comp / C&H EDC-XL / COMP - C&H Precision
SIG P320 w/ R1P / DPP CUT w/ RMR / Holosun Holes - Filler Plate for RMR / SRO / Holosun. CHPWS C&H PRECISION WEAPONS
chpws.com
I just ordered one along with a rmr from PA . I’ll give an update once I receive and install the rmr on my p320 .
Beware of chpws plates. Their qc is off the charts terrible and customer service isn't much better.So for reference I found what is a filler plate for the rmr and holoson on the p320 slides that have the rmr holes . It fills the gap between the rds and the slide cut .
SIG P320 RX Series / Pro Series / AXG Scorpion w/ R1P / DPP CUT w/ RMR / Holosun Holes - Filler Plate for Trijicon RMR / SRO / RCR / Holosun 407C / 507C / 507Comp / C&H EDC-XL / COMP - C&H Precision
SIG P320 w/ R1P / DPP CUT w/ RMR / Holosun Holes - Filler Plate for RMR / SRO / Holosun. CHPWS C&H PRECISION WEAPONS
I just ordered one along with a rmr from PA . I’ll give an update once I receive and install the rmr on my p320 .
BMF JK
.44 mag
Really? Good to know , from what I’ve read I was rather hopeful.
MikeyCNY
6.5 Creedmoor
I've heard similar - my only experience with them is a plate for my M&P 2.0 Compact. No issues with the plate itself, however their directions indicated (IIRC) 10 in-lbs, and after a range trip the optic (Holosun 509t) was working loose. After some research, I found the proper amount is 15 in-lbs. Didn't have any issues after that, and it also went through a class with Ben @ Onsight.
CHPWS plates have had some seriously bad issues and seem to keep having those issues periodically. Thread lugs breaking, loose tolerances, milled crooked…Definitely keep an eye on it. Forward Controls makes a much nicer plate than CHPWS. In the future if FCD has one that fits the model handgun and optic, I’d go that route instead. I know they make some for S&W, Glock, Sig, HK, Staccato, and FN.
Saltwater60
.950 JDJ
10 in-lbs is pretty light. I get following there directions but yeah that seems off to me.
BMF JK
.44 mag
Unfortunately FCD doesn’t offer what I need .
Same here. I contacted them to see if they would consider making a plate for my P10 someday and the answer was they are only making plates for "duty" weapons. Kind of turned me off to them.
Yeah, that’s why I mentioned only if they make the plate for your specific make and model optic and pistol. Their reply doesn’t turn me off to them because the products they do make are high quality. Just because he doesn’t make a specific plate for a certain setup wouldn’t stop me from purchasing a very well made product for a different setup that they do make. All it does is leave a hole in the market for eventually someone else to pick up.
Saltwater60
.950 JDJ
I agree. It’s hard to ask a guy to set up a machine to make a plate he’s not going to make many of. Custom work comes with a high price tag.
Saltwater60
.950 JDJ
I know a machinist that would likely make you a plate if you could get him all the specs you need. He’s not a gunsmith but I don’t think making a plate is illegal or requires a smithing license.
Yeah, I literally will never use any CHPWS product at all. I’ve seen enough issues from their plates and even their milling work. I wish I could find all the old pictures and video of the problems they keep having. Metallurgy, poor hardware, anodizing, plates out of spec, milling F’d up…it’s not worth it using them if it’s avoidable.
View attachment FullSizeRender.MOV
View attachment FullSizeRender.MOV
View attachment FullSizeRender.MOV
View attachment FullSizeRender.MOV
This is why plates suck and direct mount is best. I wish all these half ass plate mounts would fucking go away, or at least for manufacturers to offer non-cut slides so the customer has the option to have it custom milled. I fucking hate it when the youtube idiots bitch about non "Optics ready" guns. Fuck off with that jury rigged bullshit already.
BMF JK
.44 mag
I guess at this point I’m annoyed. I have a p320 slide that according to Sig it’s ddp and rmr compatible , but after researching I still need a filler plate to fill the space between the optic and the milled edge . So it’s not really an adapter plate , not sure why sig wouldn’t offer this filler plate .
Some say just mount it and the screws will hold , I don’t trust that . Some say just go with a Romeo, I don’t want a Romeo . For the price of a Romeo pro I can get a rmr which in my opinion is far superior .
At this point I may sell my slide and order a custom slide specifically for a rmr !
Some say just mount it and the screws will hold , I don’t trust that . Some say just go with a Romeo, I don’t want a Romeo . For the price of a Romeo pro I can get a rmr which in my opinion is far superior .
At this point I may sell my slide and order a custom slide specifically for a rmr !
BMF JK
.44 mag
Did a quick dry fit tonight. The CH plate seems to do what it’s supposed to . Unfortunately the screws that came with the rmr were too long so I’m using the screws that came with the filler plate .
This will be in my carry rotation and I’ll will do a fair amount of testing before hand. The gun itself has had 300 flawless rds of various ammo including my carry ammo of choice. I’ll run another 4-500 rds once the rmr is properly mounted before I bet my life on it .
So far Gunnar has given his approval !
This will be in my carry rotation and I’ll will do a fair amount of testing before hand. The gun itself has had 300 flawless rds of various ammo including my carry ammo of choice. I’ll run another 4-500 rds once the rmr is properly mounted before I bet my life on it .
So far Gunnar has given his approval !
BMF JK
.44 mag
This morning I ran an additional 400 rds through my p320 punching fist size groups with ease . I must say I’m in love and I’m 100 % confident she won’t break my heart .
Saturday I mounted the rmr applied thread locker , torqued to spec and let it cure .
The dot held zero and didn’t fly off ! The filler plate and fasteners did as intended. I burned through various ammo once again no issues whatsoever. Shot up some carry ammo that I’ve been carrying for a while , which the sig fired perfectly. The +p ammo seems much softer in this pistol than my G19 .
I received an ANR design AIWB holster which I’ve been carrying with all weekend around the house and I must say it’s extremely comfortable and the retention on the light is perfect.
I’ve decided not to use suppressor height sights . I prefer the unobstructed view through the rmr . I know I know what about back ups cause the stock sights are useless . They’re actually not I can tip the barrel up slightly and pick up enough of the front sight to line up with the rear . I tested today this method of aim and I shoot 4 inches high at 25 feet . If rmr goes down which is very unlikely I’ll adjust my hold and I can still go to work .
I’m confident in the setup and will be carrying this pistol everyday .
Saturday I mounted the rmr applied thread locker , torqued to spec and let it cure .
The dot held zero and didn’t fly off ! The filler plate and fasteners did as intended. I burned through various ammo once again no issues whatsoever. Shot up some carry ammo that I’ve been carrying for a while , which the sig fired perfectly. The +p ammo seems much softer in this pistol than my G19 .
I received an ANR design AIWB holster which I’ve been carrying with all weekend around the house and I must say it’s extremely comfortable and the retention on the light is perfect.
I’ve decided not to use suppressor height sights . I prefer the unobstructed view through the rmr . I know I know what about back ups cause the stock sights are useless . They’re actually not I can tip the barrel up slightly and pick up enough of the front sight to line up with the rear . I tested today this method of aim and I shoot 4 inches high at 25 feet . If rmr goes down which is very unlikely I’ll adjust my hold and I can still go to work .
I’m confident in the setup and will be carrying this pistol everyday .
MikeyCNY
6.5 Creedmoor
507k-x2 in Green on the left, after about a month of AIWB carry. Dot is clearer than that but hard to focus in picture (both currently on Circle+Dot but will likely go back to just dot, just trying it out)
Curing for a few days before reconfirming zero. I did have one issue - the screws that both came with the optic (and new ones I had ordered from McMaster-Carr) were shorter than the ones I used on the 507k. Apparently SIG changed the screw length with a revision, I have an earlier model where the rear sight comes off with the plate. Newer models leave the rear sight on?
I didn't want to re-use the previous screws but also didn't want to have to reorder and wait a week+, so I just cleaned the hell out of the screws and hoped for the best.
When I upgrade in another year I'll worry about it then...
Curing for a few days before reconfirming zero. I did have one issue - the screws that both came with the optic (and new ones I had ordered from McMaster-Carr) were shorter than the ones I used on the 507k. Apparently SIG changed the screw length with a revision, I have an earlier model where the rear sight comes off with the plate. Newer models leave the rear sight on?
I didn't want to re-use the previous screws but also didn't want to have to reorder and wait a week+, so I just cleaned the hell out of the screws and hoped for the best.
When I upgrade in another year I'll worry about it then...
You know you can clean the lense of a red dot without damaging it. Just saying...507k-x2 in Green on the left, after about a month of AIWB carry. Dot is clearer than that but hard to focus in picture (both currently on Circle+Dot but will likely go back to just dot, just trying it out)
View attachment 189133
View attachment 189135
View attachment 189136
Curing for a few days before reconfirming zero. I did have one issue - the screws that both came with the optic (and new ones I had ordered from McMaster-Carr) were shorter than the ones I used on the 507k. Apparently SIG changed the screw length with a revision, I have an earlier model where the rear sight comes off with the plate. Newer models leave the rear sight on?
I didn't want to re-use the previous screws but also didn't want to have to reorder and wait a week+, so I just cleaned the hell out of the screws and hoped for the best.
When I upgrade in another year I'll worry about it then...
How I feel about optics mounting plates:
I must be from the Statfordshire branch
I must be from the Statfordshire branch
gun_slinger_boy
.338 Win Mag
So done for now. Went with the 507C. Picking up the red dot took less than a minute. If you have experience with one on a rifle it should be easy get with a hangun as well.
