Is it side charge? Is it billet?
New 204 Upper Being Built
- Thread starter JamieZ
- Start date
1075tech
.338 Win Mag
Yes and yes
Blem – Forged MG4 Side Charging Upper Receiver
Cosmetic Blems - GIBBZ Arms Patented Left Side Non-reciprocating Charging Handle - Protected by Patent No. 9,310,146 - Machined from our Custom Forging (7075 Aluminum). - Shell deflector - Ejection port dust cover - Forward Assist - Uses all Mil-Spec and most Custom Bolt Carriers without...
www.gibbzarms.com
Im going to say not exact but similar,,, that one is nicer. I like the cut/design.Yes and yes
Blem – Forged MG4 Side Charging Upper Receiver
Cosmetic Blems - GIBBZ Arms Patented Left Side Non-reciprocating Charging Handle - Protected by Patent No. 9,310,146 - Machined from our Custom Forging (7075 Aluminum). - Shell deflector - Ejection port dust cover - Forward Assist - Uses all Mil-Spec and most Custom Bolt Carriers without...
I intend to use it both day and night. I wear snow camo any time there is snow unless I know I will be perched in a hay loft or something. I see guys out at night in green camo and they stick out like a black bear against the snow. My thoughts are white against white no matter what the lighting situation is. When there is no snow, green, brown and black work just fine.
1075tech
.338 Win Mag
Shoots100
.357 mag
Coyote blood Red is one of my favorite colors !
I think some time Tuesday my new revised parts will come in. Bought 2 red parts, along with my new receiver and muzzle device lol.
A red Strike Ind. extended charging handle and a red Strike Ind. angled foregrip.
Spike's Tactical AR-15 Upper Receiver - Forged M4 Flat Top (Multi Cal)
Spike's Tactical AR-15 Upper Receiver - Forged M4 Flat Top (Multi Cal)
www.joeboboutfitters.com
Kaw Valley Precision .223/5.56 Linear Comp 1/2x28 Black Oxide
Kaw Valley Precision .223/5.56 Linear Comp 1/2x28 Black Oxide
www.joeboboutfitters.com
Strike Industries AR-15 Extended Latch Charging Handle
Strike Industries AR-15 Extended Latch Charging Handle
www.joeboboutfitters.com
Strike Industries LINK Curved Foregrip
Strike Industries LINK Curved Foregrip
www.joeboboutfitters.com
So Im on my way to my first non all black AR
Just bought more red parts. Hope I like this shit when its done.
Strike Industries Forward Assist Assembly - Red
DetailsStrike Industries products are designed by shooting experts for the shooting sportsman.The SI Forward Assist is a quality addition to the Strike Industries line of performance AR-15 parts. The Forward Assist plunger is made of aluminum for weight savings without sacrificing functionality...
www.primaryarms.com
Strike Industries Billet Ultimate AR-15 Dust Cover - Red
DetailsFor those shooters who were interested in the convenience and easy installation of the Ultimate Dust Cover from Strike Industries, but couldn't bring themselves to trust a polymer component in sugh a high stress environment as the ejection port, want no more! The Billet Ultimate Dust...
www.primaryarms.com
Strike Industries AR-15 Ambidextrous Safety Selector Switch - Red
DetailsImprove your shooting experience with the Strike Industries AR-15 Ambidextrous Safety Selector Switch. It features a patent-pending modular design machined from aircraft-grade aluminum and a high-strength steel safety shaft. Engaging the safety is easy without altering the firing grip...
www.primaryarms.com
Strike Industries AR-15 Buffer Tube - 7-Position Advanced Receiver Extension - Red
DetailsNote: Not compatible with rifle length buffers or springs. Internal length is the same as a standard carbine buffer tube.The Strike Industries 7-Position Advanced Receiver Extension offers more adjustment for your carbine stock as well as additional features that make this an easy choice...
www.primaryarms.com
Well I like it. Not to much red, maybe not enough but Im going to leave it this way before I end up hating it.
Gun is a Spikes upper receiver, Anderson lower receiver, Geissele SSA-E 2 stage trigger, (missing) X-Caliber custom 204 barrel, Odin O2 handguard
Bottom of the handguard there is a Swiss Arca attachment that mounts to all ball heads.
Gun is a Spikes upper receiver, Anderson lower receiver, Geissele SSA-E 2 stage trigger, (missing) X-Caliber custom 204 barrel, Odin O2 handguard
Bottom of the handguard there is a Swiss Arca attachment that mounts to all ball heads.
Shoots100
.357 mag
You need this grip to put it all together.
attackcopter.com
TANDEMKROSS RELEASES THE HIVE GRIP FOR THE AR-15 PATTERN
Tandemkross has recently expanded support for the AR-15 pattern with their new Hive Grip that comes in both Black and a black and red bi-tone. Tandemkross st
attackcopter.com
Shoots100
.357 mag
I don't see the barrel, unless it's that new invisible carbon material I was told about ?
Im old. It's late. The picture is all purple psychedelic. Gimme a break !
Thought about doing the grip, found some other ones, I do like that one though.You need this grip to put it all together.
TANDEMKROSS RELEASES THE HIVE GRIP FOR THE AR-15 PATTERN
Tandemkross has recently expanded support for the AR-15 pattern with their new Hive Grip that comes in both Black and a black and red bi-tone. Tandemkross st
This is the one I like because I assume it will be lighter.
Mod Grip-(Red)
An extremely lightweight, Aluminum and Polymer Composite AR-15 Grip, the MOD grip is the first of its kind and the best AR-15 grip currently on the market!
www.tyrantcnc.com
Ive settled on this grip. Gets good reviews from everywhere Ive seen it.
Problem is, its out of stock everywhere, even from the MFG
Problem is, its out of stock everywhere, even from the MFG
Torque Pistol Grip - Carbon Fiber - 25 Degree
fortismfg.com
Ive finally finished my 2nd 204, after waiting for my custom barrel to be finished.
1st 204 is made from billet Seekin's upper, lower and handguard with a 20" Lilja 12 twist barrel.
2nd 204 was made with a forged upper, lower and a Odin O2 handguard, with a 18" X-Caliber carbon fiber 11 twist barrel. It also has a low mass bolt carrier.
There is a 2.2 lb difference between the 2 coyote killers. 1st 204 will now be dedicated to chucks though.
Both guns have SSA-E triggers in them.
Here is my finished product. Couple of the parts were painted with Dupli-Color anodizing paint. They turned out really well. Paint has a heat resistance of 500f.
1st 204 is made from billet Seekin's upper, lower and handguard with a 20" Lilja 12 twist barrel.
2nd 204 was made with a forged upper, lower and a Odin O2 handguard, with a 18" X-Caliber carbon fiber 11 twist barrel. It also has a low mass bolt carrier.
There is a 2.2 lb difference between the 2 coyote killers. 1st 204 will now be dedicated to chucks though.
Both guns have SSA-E triggers in them.
Here is my finished product. Couple of the parts were painted with Dupli-Color anodizing paint. They turned out really well. Paint has a heat resistance of 500f.
Shoots100
.357 mag
Looks great, can't wait to see it in person.
It looks just ok to me. In my head, before finishing it, it looked better.
Everything was done perfectly on it and it is 2.2 lbs lighter than the other 204 but I put it together and I chose the color scheme and I painted a couple of parts,,,,, so it wont be perfect till I forget about it and start hunting with it.
I will be happy if she is laser beam accurate,,, which will make me forget about the way she looks
Oh,, I changed the stock already. Went back to the stock I had in the previous pic, the one without the barrel, in this thread.
Barrel is broke in per manufactures recommendations. I was shooting 26gr bullets, they are Barnes Varmint Grenades over 29.5gr of 8208 compressed.
She shoots like a laser but it was only at 50yds. It was almost the same hole through out all the cleaning and shooting.
She cycles beautifully.
Only thing I didnt get to do was measure velocity, it was getting dark.
Im guessing I will get about 4000fps with the 26's out of the 18" barrel, maybe slightly less. 24" barrel runs at 4300fps, per Hodgons data
She shoots like a laser but it was only at 50yds. It was almost the same hole through out all the cleaning and shooting.
She cycles beautifully.
Only thing I didnt get to do was measure velocity, it was getting dark.
Im guessing I will get about 4000fps with the 26's out of the 18" barrel, maybe slightly less. 24" barrel runs at 4300fps, per Hodgons data
Shoots100
.357 mag
Have you tired the 40 grain V max ?
26 Grain is good for chucks, but not really designed for the bigger varmints, especially at distance.
26 Grain is good for chucks, but not really designed for the bigger varmints, especially at distance.
They klll yotes with 17hmr and 22lr. I'm sure I will have no problems switching from 32's to 26"s.
Haven't tried the 40's, I need to order a box. I think I may have some 39's that my other 20cal didn't like.
I've seen 32's drop deer in their tracks at 250 yds. I've seen 32's drop yotes at 500yds and even 600. This is all video documented and it was more than one time. Speed Kills
You are to kind!
I will check my cabinet when I get home and see if I have any 39's, if not I will order some.
If I dont order before you come out here in December, I will buy them from you.
Do you reload 40's? I ask because I was thinking you had a big supply of manufactured ammo.
I remember having 2 boxes of 40's made by Fiocchi.
My Seekin's wouldn't shoot them, so I pulled all the bullets out of them so I could keep the brass.
Shoots100
.357 mag
Use whatever your rifle shoots the best, but I don't go out with anything under 35 grains in my 20 practical.
While speed does kill, a light jacketed projo made for vermin will blow up on impact, especially when hitting bone.
The heavier projos are made with thicker jackets for better penetration.
You can kill a deer with a sling shot, doesn't mean you should.
Either way, I'll be there to back you up with the .243 after your done blasting with the 204.
Just checked, I have no 39's
Though I do have roughly 750 Nosler Ballistic Tip 32gr Varmint bullets that I dont use if anyone is looking for any. Dont know why I dont use them, I must not of liked them. They are boat tails.
Have a bunch of 32gr Vmaxs and one box of Sierra 32gr and a 250 pill box of 26gr Barnes.
The Sierra 32gr bullets I liked and for whatever reason they always shot the fastest.
Ive been waiting for the Berger 35's, they never come in stock.
I don't reload the .204. I have a ton of once fired brass all saved up, but I still haven't bought dies. I bought 500 rounds of Hornady 40gr V-Max a year ago, since it shoots very well in both of my rifles. However, since almost everyplace I hunt is now open to hunting with larger than .20 caliber rifles while big game is open, I mostly use the .223 guns. Some day I'll find a set of dies and start messing around with it, but that's not currently the case.
I will probably be out on the therapist this Saturday, since riding season is coming to an end soon. I never really have a destination in mind for my therapy sessions, so if you wanted a box of shells, I could drop them off somewhere. You're going to want to try them out long before hunting season opens. Let me know. Otherwise, if you're up for a range day, you could meet me at my club in Corfu. We have a 100 yd covered range, as well as the ability to stretch it out to 300. I have a spotting scope and a LabRadar chronograph.
It appears as though I have lost a few of my favorite hunting locations. I went to visit many of the farms last week, and found that a couple were sold, and still more were for sale. One of the places I have hunted for more than a decade told me I couldn't hunt there anymore because the asshole neighbor down the road called the cops and complained too much. This was the place where the neighbor and the farmer got in a big arguement and then someone took a shot in my direction last year.
I will probably be out on the therapist this Saturday, since riding season is coming to an end soon. I never really have a destination in mind for my therapy sessions, so if you wanted a box of shells, I could drop them off somewhere. You're going to want to try them out long before hunting season opens. Let me know. Otherwise, if you're up for a range day, you could meet me at my club in Corfu. We have a 100 yd covered range, as well as the ability to stretch it out to 300. I have a spotting scope and a LabRadar chronograph.
It appears as though I have lost a few of my favorite hunting locations. I went to visit many of the farms last week, and found that a couple were sold, and still more were for sale. One of the places I have hunted for more than a decade told me I couldn't hunt there anymore because the asshole neighbor down the road called the cops and complained too much. This was the place where the neighbor and the farmer got in a big arguement and then someone took a shot in my direction last year.
Not sure if you have my number but I will PM you it anyway.
LabRadar chronograph,,, nice!! I have the one that attaches to the end of your barrel, the Magnetospeed.
It works well but Im wondering if I will have issues on the new gun seeing how the muzzle end is much wider than the barrel. It might not align properly to read the bullets without getting hit by one.
If you ever want to sell me the brass you have acquired just let me know. Always seem to be low on brass because Im always loading up something new. Actually starting to get low on IMR 8208, my favorite 20 cal powder. I do have like 4lbs of Benchmark I could switch to though.
It would be fun to come and meet you out in Corfu. Let me see what day I could come up with and then see if you have the time. Between early deer season, the end of Sept goose season and my laundry machine I need to trouble shoot, plus going to Wellsville to pick up a Hunting shed that the land owner and I plan on putting on the back of a trailer so that its mobile ,,, Im spinning a little bit right now trying to do everything. Buying the shed from the Amish, the cost is less than what I would spend on lumber building it. Want it because I can heat it and sit out all day in comfort.
If you lose everything and still want to predator hunt,,, I will invite you more often. Hour drive but it wont be to bad every now and then.
See if you have time on Sunday to meet in Corfu,,, I should probably check the weather before asking that