1 of 20 is a bad ratio. I need to see like 1 per 10,000.
Who said I didn't read the good reports? But when it comes to a gun, I'd be a fool to not read the bad reports since a gun that could fail can fail my survival.Of course I do, but the difference is I look at all the reports not just a few. No count here but for every report of a problem there has be 15/20 reports of no issue. And, we all know its much more likely that one will report problems that success.
Unlike you I dont trash stuff I dont have experience with it. You do so like your some kind of expert because you have watched a few videos. Have you ever fired a p365?
How many total again? Can I see your primers?
Are your hand loads loaded slightly weaker than factory loads? I only ask because if they are, that would explain the timing issue and why hot loads aren't extracted yet but the barrel tilts up anyway.Only about 450 rounds total so far. I'll try to post pictures tomorrow. Striker drag varies from just noticable to dragging right to the edge of the primer. I have to check again but it seems like the striker drag is less with my 115 grain hand loads than with the factory ammo I brought. For punching paper I use a reduced charge load. The factory ammo I had today was Fiocchi 115 FMJ.
So has he reported on the 3rd yet? has he fired it? What did he say about sending the bad ones back?
Are your hand loads loaded slightly weaker than factory loads? I only ask because if they are, that would explain the timing issue and why hot loads aren't extracted yet but the barrel tilts up anyway.
So has he reported on the 3rd yet? has he fired it? What did he say about sending the bad ones back?
In the video he states he doesnt send guns back to cover his ass incase they try to bring him into court he can show he hasn't done anything to the guns to cause them to fail. Roughly around the 8-8:30mark .
And side note. Probably worth a different thread, but I wish wish wish that ghost gunner would continue with the 80% 320s
After seeing the video and checking out the B&T USW I'd love to get one (I know I cant yere in NY unless they do an arm brace version) but with something better than the romeo 1
I have to agree with you there. Now we have to break it down by round count.So he is sitting on $1000 of broken guns in case of a lawsuit? And 6 months after saying he bought a 3rd and no report hmm, something smells.
So yes I guess I can say I have more experienced more p365s than him. When he reports on the 3rd we will be tied.
The problem with Sig 80% is getting the the fire control system from Sig since its the part with the number. But to be honest I dont see the point to any of the 80% pistols anyway.
So he is sitting on $1000 of broken guns in case of a lawsuit? And 6 months after saying he bought a 3rd and no report hmm, something smells.
So yes I guess I can say I have more experienced more p365s than him. When he reports on the 3rd we will be tied.
Yeah they don’t apparently, so many Glops sitting on tables.Haha. Sales...
Taurus had a lot of sales when their brand was popular. I remember the millennium series. Those used to sell like hotcakes. Mini 30's that jam with steel case used to sell like hotcakes.
Sales don't mean shit. Diamondback DB9's sold a lot too so did the Rohrbaugh R9.
Didn't you tell me to ignore you?Yeah they don’t apparently, so many Glops sitting on tables.
How does one know which is which since they all look the same?
Yeah but I’m not ignoring you. Why are you hiding?Didn't you tell me to ignore you?
Users who don't recognize primer drag as a problem.Let’s see, four or five actual users here with hundreds if not thousands of rounds fired and some hater(s) wants to tell us what they hear on YouTube? Yeah, ok.
What problem? Come out from hiding already.Users who don't recognize primer drag as a problem.
The defense rests.What problem?
WhateverThe defense rests.
I have to agree with you there. Now we have to break it down by round count.
But after all is said and done, I tend to side with him though since he doesn't seem to take offense to his purchases and take things personal. He's purchased many more guns than you, reviewed them, and also owns his own gun shop. A favorable review would net him more sales.
Users who don't recognize primer drag as a problem.
Why not fix the timing? A harder striker can fail too. Metal gets more brittle in cold weather.Wondering why you consider striker drag a problem? If the timing on a gun is such that causes a striker to drag, so what? If the parts are engineered properly and to the correct hardness there is no problem.
So possibly he makes more profit on other pistols?
6 months since the purchase on the 3rd pistol and no word, maybe his ammo sponsor has not sent him the ammo. I wonder who elese he receives money or products from?
And no I dont take any of it personal, no reason to. I dont have the time to sit around and watch videos because I actually go to the range and shoot, and compete in matches.