masterswimmer
.450/400 Nitro Ex
I bought the Ruger LCR about 6 years ago. I just couldn't get used to no rear sight. It was the only firearm I ever owned, and sold.
Starting a "What did you Get today" thread. Let's give it a try (dont forget pics)
- Thread starter Edwardteach72
- Start date
I bought the Ruger LCR about 6 years ago. I just couldn't get used to no rear sight. It was the only firearm I ever owned, and sold.
It has the gutter sight in the rear. It's not the best but does the job for a stubby backup gun.
I plan on putting on Hogue laser grips anyway.
Last edited:
1075tech
.338 Win Mag
I have a Taurus 85 with fixed sights like that. With 110 gr XTPs, it shoots POA at 15 yards. I was surprised at how accurate it was.
1075tech
.338 Win Mag
Pictures when I get it put together but I picked up a 1982 date of manufacture Delta Rockwell Unisaw with a Biesemeyer fence. By "I", I mean me and 3 others to get it in/out of the truck.
Pic from the seller,
Unfortunately, I didn't really have the extra money for the router table and lift. Had to put the original cast iron wing back on
Pic from the seller,
Unfortunately, I didn't really have the extra money for the router table and lift. Had to put the original cast iron wing back on
Carlos Hathcock
.450/400 Nitro Ex
That's some serious shit there. Watch out for kickbacks.
1075tech
.338 Win Mag
1st upgrade is going to be a Sharkguard ARK
Jmac00
.475 A&M Magnum
what did I get today ~~~~ STUPID, that's what I got.
I decided to change the oil in my QD6000 diesel generator on the Escape Pod. How hard can that be
LOL Im a dumbass
I should have known this would be a pain-n-the-ass when I had to use a 18" breaker bar to get the drain plug out
next was the absolutely brilliant place they put the oil filter. first the oil filter was only 2½" in diameter. the replacement filter is 3". I was going to use a set of channel locks, but after the drain plug fiasco, I figure they cranked on the filter as well. So off to Advanced auto parts to find a small oil filter wrench ~~~score!. and I was right, I had to whoop on that thing to get it out
next, getting that piece of shit out was a nightmare. after I got it out, putting the new one in was worse. there was very little room, I could barely get my hand in there. I was worried I'd cross thread the stupid thing....
long story short, the good news is I won't have to do this again for a 150 hours. it took us 19 months to put 50 hours on the genset. but now that its changed, I shouldn't have to do this for at least a year....maybe longer
I decided to change the oil in my QD6000 diesel generator on the Escape Pod. How hard can that be
LOL Im a dumbassI should have known this would be a pain-n-the-ass when I had to use a 18" breaker bar to get the drain plug out
next was the absolutely brilliant place they put the oil filter. first the oil filter was only 2½" in diameter. the replacement filter is 3". I was going to use a set of channel locks, but after the drain plug fiasco, I figure they cranked on the filter as well. So off to Advanced auto parts to find a small oil filter wrench ~~~score!. and I was right, I had to whoop on that thing to get it out
next, getting that piece of shit out was a nightmare. after I got it out, putting the new one in was worse. there was very little room, I could barely get my hand in there. I was worried I'd cross thread the stupid thing....
long story short, the good news is I won't have to do this again for a 150 hours. it took us 19 months to put 50 hours on the genset. but now that its changed, I shouldn't have to do this for at least a year....maybe longer
Carlos Hathcock
.450/400 Nitro Ex
Small preview only. Hoping to see it early next week.....
Carlos Hathcock
.450/400 Nitro Ex
Was a good day. Lots shit for the upcoming hunting season. Some freedom pills for my buddy's Bergara too.
Carlos Hathcock
.450/400 Nitro Ex
Adding to the hunting accomodations. Got to liking hunting from a blind last year. Rhino see through blind. My small blind got flattened in the snow last winter. Going to reinforce this one and build a platform. The full height see through panels are AWESOME.
Ball joint kit came in as well. I'm a glutton for punishment but hate having people do shit I can do myself. Now I can swear at just about any ball joint on the market.
Looks like Monday is the big day. Long time waiting for this to get here. Hope it's all I'm expecting it to be....
Ball joint kit came in as well. I'm a glutton for punishment but hate having people do shit I can do myself. Now I can swear at just about any ball joint on the market.
Looks like Monday is the big day. Long time waiting for this to get here. Hope it's all I'm expecting it to be....
ArmedCorgi
.475 A&M Magnum
You can probably guess what this is for...
kev74
20×102mm Vulcan
kev74
20×102mm Vulcan
I found an inside micrometer set in an antique store for $12. These sell for $250 new, and $80-100 used. 
ArmedCorgi
.475 A&M Magnum
Damn you're good!Got tired of having Aquaman on your lunchbox?
ArmedCorgi
.475 A&M Magnum
Was hoping to pick up a PSA Dagger frame and another H&R retro lower, this time an A2. But they hadn't checked the lower in yet. So I came home with the Dagger and an impulse buy. I'll get the lower Monday or Tuesday.
So far, the Dagger frame feels way better in the hand than my Glock.
So far, the Dagger frame feels way better in the hand than my Glock.
Picked up a few more 21 rounders for the P320 Legion and ordered a CZ hard tail coach 12Gauge Side by Side for cowboy games.
That_FNG
.308 Win
Picked up a LNIB basically unfired Gen 2 Sig P250 compact. Will put up pictures once I have it home. It is going to be something of a little project gun.
Carlos Hathcock
.450/400 Nitro Ex
Decided I'm going to stick with trap. My beginner firearm selections were good enough for what I needed at the time. Stepped up to a lifetime tool of choice....
Beretta DT10 circa 2004. I'm told these are basically bulletproof and should expect zero failures during its life. Shot maybe 6 rounds last night and think I'm going to like it.
Beretta DT10 circa 2004. I'm told these are basically bulletproof and should expect zero failures during its life. Shot maybe 6 rounds last night and think I'm going to like it.
garyv350
.357 mag
I have one. Probably put 1000 rounds through it and not a single hiccup.
Acer-m14
20×102mm Vulcan
now you need to raise that flat rib LOL ..
Bustedknees
.308 Win
I have a friend that is heavily into competition trap shoots. His recent shotgun is a single shot. No reason to swing the weight of two barrels he told me.now you need to raise that flat rib LOL ..
Acer-m14
20×102mm Vulcan
I agree for Trap shooting .. there are no doubles like in Skeet ..
Carlos Hathcock
.450/400 Nitro Ex
I like to have the ability to shoot both if I want to.
ArmedCorgi
.475 A&M Magnum
I got a slide for my Dagger frame and a shoulder thing that goes up for my next retro built.
There are a bunch of clubs that have doubles trap. The one I belong to has two fields with machines capable of throwing doubles.
